Neon Flex LED Band - 12W/m - 11mm wide - VERTICAL bendable

€85.00*

Content: 5 (€17.00* / 1 Meter)

Available, delivery time 3-5 days

Colour temperature
Product number: LK04-23d-60
Available stock: 11

  • LED type: 2216
  • 300 LED/m
  • Color rendering: High CRI>90
  • Voltage: 24 Volt
  • Power: 12 Watt/m
  • Width: 11mm
  • Height: 8mm

Price for 1 roll = 5m



The NEON FLEX strips are absolutely uniform light strips where no individual LEDs are visible. This is achieved by a milky-opal silicone shell that encloses the LED ribbon. Nevertheless, the NEON FLEX strips are highly flexible and can also be bent very well due to the small width of only 11mm. The silicone sleeve also grants IP67 water resistance. 

With CRI>90 a very good color quality is achieved, which also meets high demands.

 


Available variants

  • 5m-Roll IP67 Water protection in silicone hose, incl. 10cm connection cable
All variants have a 3M adhesive tape on the back for mounting, are divisible every 2cm and are available in various color temperatures (e.g. 2,500K warm white).




Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 66 Watt is required. 5m x 12W/m + 10% safety = 66 Watt.

For a brightness control of the 5mdriver with min. 3 Amps is needed. 66W / 24V = 2,75 Amps.

You will find answers to frequently asked questions in our FAQ.


 

Properties "Neon Flex LED Band - 12W/m - 11mm wide - VERTICAL bendable"
Brightness lm/m: 500
Colour rendering: CRI>90
Colour temperature: 5.000K kalt
Power: 12
Seperatable every (cm): 2,0 cm
Strip width in mm: 11
Voltage: 24V
Water protection: IP67 with silicon tube
LED/m: 300
Data according to manufacturer. Errors and changes reserved.
datasheet

Suitable accessories for Neonflex

Silicone: 10ml
Mit der Silikondichtmasse lassen sich Neonflex- oder LED-Streifen im Silikonschlauch (IP67/68) mit entsprechenden Endkappen wieder wasserdicht verschließen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Teilstücke aufgeteilt werden soll. Das Silikon ist acetatfrei wodurch beim Aushärten keine Essigsäure entsteht, welche die elektronischen Bauteile des LED-Bandes beschädigt. Eine Tube á 10ml reicht zum Versiegeln von ca. 4-6 Endkappen (je nach Größe der Endkappe).
Product number: SIL01

€2.50*
Silicone end cap for Neonflex white
Suitable silicone can be ordered separately.
Product number: LK04-23d-ek

€0.90*
Waterprotected cable set: 2-pin
Das Set erlaubt es in Verbindung mit Silikondichtmasse und Endkappen wasserdichte Anschlüsse für weiße LED-Streifen herzustellen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Stücke geteilt werden soll.
Product number: LK04-23d-Con2

€2.50*

Power supply

Power supply HLG 24V - 5A - 120 Watt, extremely quiet
Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data:  Model HLG-120-24  Voltage 24V  Maximum power 120W  Current 5A  Adjustable voltage range 22 ~ 27V  Overcurrent protection 95...108%  Inrush current, max. 65A  Voltage input 90...264V AC (47...63Hz), 127...370V DC  Power factor 0,95  Working temperature -40...+70°C  Dimensions 2220x68x38.8mm (LxWxH)  Weight 1,120g  
Product number: LED1134

€49.00*

Recommended driver

Radio dimmer LK55-2 | 1 x 8A
The 1 x 8 amp driver offers only one output and is therefore only suitable as a dimmer. Due to the 8 amps, however, very powerful LED components can be connected. At 24 volts, for example, LED components up to 170 watts are possible. The driver is installed between the power supply and the LED component. It is ideally suited for small and medium installations, as well as a supplement for larger installations. The driver belongs to the LK55 series and can be combined with all dimmer remote controls available there.    NOTES: All drivers of our LK55 series remember the last setting even in case of power loss. RGBW and CCT color temperature remote controllers have no function on the LK55-2 LED dimmer.   Technical data: Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 1 x 8A Min. dim level: <1% (for RGB/W <3%)Connection: input: V+/ground, push button; output: V+/groundIP class: IP 20 Dimensions: LxWxH 95x37x20mm   Operation via pushbutton input The LK55-2 offers 2 green screw terminals on the back for a button input. For example, a simple pushbutton can be connected to this and thus control the light without radio. Short keystroke switches the LEDs on and off. Long keystroke dims the LEDs up and down. Instead of a pushbutton, in principle only 2 cables can be connected, which are then held together short or long. Video tutorial for dimming via radio   Video tutorial for dimming via cable with PUSH DIM
Product number: LK55-2

€36.00*

Suitable remote control for driver

Handheld remote control touch wheel | 4 zones
Brightness control up to 4 light zones operateable Touch wheel for adjusting the brightness 1 Channel 3 memory keys for individual settings All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. NOTICE:  The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls.   Technical data:  Item no. LK55FB1  Power supply 3 x 1,5V AAA batteries  Dimensions (LxWxH) 120x55x17mm   Operation:   This video explains the functions of the LK55FB1:  
Product number: LK55FB1

€49.00*