SEDU Driver

The SEDU board is a universal board for various tasks. It has a USB port and a DMX transceiver IC. The power supply can be done via USB as well as externally. In this variant an external power supply of 7-24V is set. Attention: This board is not suitable for the Ambient Light System! For an Ambilight, please select this item. This version of the SEDU board represents a special application. The installed firmware accepts data in DMX format (510 channels) via the DMX port and outputs them in WS2801 or TM1804 format. These are common digital strips that can be connected directly. The SEDU-DMX can convert up to 170 RGB channels (about one DMX universe). A more detailed description can be found at www.sedu-board.de. Scope of delivery: 1 x SEDU board "DMX-WS2801" with ATmega644p in housing1 x connector for digital strips (4-pin)1 x connector for DMX (3-pin cable, no DMX socket)

The SEDUv3 is a universal driver for digital LED pixels. It can be used to control an ambient light system as well as for an LED matrix. In contrast to the SEDUv2 additional pixels like the WS2811/12 or MY9221 are supported. The firmware is still being extended to support even more pixel types. In addition, it is possible to choose between different input protocols within one firmware. Supported are: miniDMX tpm2 DMX (future) tpm2.net / Artnet in connection with WLAN Up to 3000 pixels WS2801 and 1024 pixels WS2811/12 are supported. With a µSD card created sequences can be played back offline. You can switch between the programs with a button (in the future also via IR remote control). Scope of delivery: 1x SEDU board v3 according to version 1x connector data port Technical data: Parameter Value Power supply: 5V DC via µUSB port,max. current consumption approx. 300mA Housing: Aluminum housing, screwed Dimensions: 105 x 50 x 28 mm Data sheet / Downloads  SEDU-Board Downloads

The SEDU board with a firmware for an ambient light system is now called SEDU-Lights. The SEDU board is a universal board for various tasks. It can be equipped with an ATmega16 or compatible processors. Version 2 is equipped with the ATmega644p. It has a USB port and a DMX transceiver IC. USB and DMX can only be used separately with an ATMega16. The board has four fully external ports. Power can be supplied via USB as well as externally.  The Lights version of the SEDU board is a special application. The installed firmware accepts data in miniDMX format via the USB port and outputs it in WS2801 or TM1804 format. These are common digital strips that can be connected directly. The SEDU-Lights version 2 can handle up to 256 channels (firmware 3.0 or higher). The SEDU works only with a PC software, which transfers the data processed via miniDMX to the SEDU board. The software is not part of the delivery. Common software solutions are AtmoWin or boblight, which are freely available. (http://www.vdr-wiki.de/wiki/index.php/AtmoWin ).A more detailed description can be found at www.sedu-board.de. Scope of delivery: 1 x SEDU-Board Lights (Ambient Light) V2 with ATmega644p in case1 x connector to the SEDU1 x USB cable