Stripes/ Boards

The cluster board is designed for 9 PLCC6 LEDs. The compact size of the board results in a high luminance, depending on the LEDs used. It is quite possible to achieve the performance of a HighPower-LED. The board is completely equipped with LEDs and suitable series resistors. There are versions in RGB, cold white and warm white. Other PLCC6 LEDs can be equipped on request. Scope of delivery: 1 board 3x3 LED cluster (assembled) RoHs compliant Technical data:  Feature Parameter Platine Material FR4 white Dimensions         36x36 mm LED type PLCC6, 3 each in rowtotal 3x3 LEDs Voltage/current consumption 12V / ca. 180mA  

The module board is equipped with 28 high-quality LEDs of the 3528 type. These LEDs are equipped with approx. 8 lumens and a high CRI (color rendering index) > 90. The whole module reaches approx. 220 lumens. Therefore they are suitable for the construction of flat luminaires by combining several modules as required. The board is designed for 24V. More information can be seen in the blog (version 1). Scope of delivery: 1x module board 24V, 100x100mm, equipped with 28 LEDs 3528 warm white, CRI>90   Technical data: Feature Parameter Platine Material FR4 Dimensions         100x100 mm LED type 3528, 4x 7 LEDs in rowHighCRI >90, each approx. 8lm, warm white, approx 220 Lumen in total Voltage designed for 24V, series resistors or calculate KSQ according to LED type Power consumption: approx. 2.4W  

The module board is equipped with 28 high-quality LEDs of the 3528 type. These LEDs are equipped with approx. 8 lumens and a high CRI (color rendering index) > 90. The whole module reaches approx. 220 lumens. Therefore they are suitable for the construction of flat luminaires by combining several modules as required. The board is designed for 24V. More information can be seen in the blog (version 1). The boards have WAGO terminals on board, so it is very easy to connect connecting cables or connect boards. Scope of delivery: 1x module board 24V, 50x200mm, equipped with 28 LEDs 3528 warm white, CRI>90, 2x WAGO terminals   Technical data: Feature Parameter Platine Material FR4 Dimensions         50x200 mm LED type 3528, 4x 7 LEDs in rowHighCRI >90, each approx. 8lm, warm white, approx 220 Lumen in total Voltage series resistors designed for 24V  Power consumption: approx. 2.4W (100mA)  

The board is designed for 9 PLCC6 LEDs. The compact size of the board results in a high luminance, depending on the LEDs used. It is possible to reach or exceed the power of a HighPower-LED. The required components are PLCC6-LEDs (e.g. from Samsung) and suitable SMD resistors type 1206. On the article photos you can see different variants of the assembly. Scope of delivery: 1 board 3x3 LED cluster (not equipped) RoHs compliant     Technical data:   Feature Parameter Platine Material FR4 Dimensions         36x36 mm LED-Typ PLCC6, 3 each in seriestotal 3x3 LEDs Voltage depending on series resistor, usually designed for 12V  

The Twin-Stripe board contains two separate branches for PLCC6 LEDs on 24.5cm length. This allows a flexible assembly of the board, e.g. for 6 RGB LEDs and 6 white LEDs or also 12 white LEDs possible. The required components are PLCC6-LEDs (e.g. from Samsung) and suitable SMD resistors type 1206. On the article photos you can see different variants of the assembly. Scope of delivery: 1 board Twin-LED-Stripe RoHs compliant Technical data:   Feature Parameter Platine Material FR4 Dimensions         10x245 mm LED-Typ PLCC6, 3 each in seriestotal 2x 6 LEDs Voltage depending on series resistor, usually designed for 12V Instruction/Overview Twin LED Stripe

The Twin-Stripe board contains two separate branches for PLCC6 LEDs on 32cm length. This board is designed for 24V and therefore not divisible!  A flexible assembly of the board is possible, e.g. for 7 RGB LEDs and 7 white LEDs or also 14 white LEDs possible. The required components are PLCC6 LEDs (e.g. from Samsung) and suitable SMD resistors type 1206. Scope of delivery: 1 board Twin-LED-Stripe 24V RoHs compliant Technical data:   Feature Parameter Platine Material FR4 Dimensions         10x320 mm LED-Typ PLCC6, 3 each in seriestotal 2x 7 LEDs Voltage designed for 24V, calculate series resistors according to LED type Instruction/Overview Twin LED Stripe

The Twin-Stripe board contains two separate branches for PLCC6 LEDs on 32cm length. This board is designed for 24V and therefore not divisible!  These stripe boards are applications that are suitable for an adjustable color temperature. This is achieved by alternating cold and warm white LEDs, which are controlled by a suitable driver. The board is designed for Samsung's 2-chip as well as 1-chip LEDs. 2x 7 LEDs are applied to each board. It makes sense to operate them with a KSQ at 100mA and 24V operating voltage. Alternatively, the assembly can be done with a series resistor of an appropriate power class. Scope of delivery: 1 board ColorAdj LED stripe 24V RoHs compliant   Technical data:   Feature Parameter Platine Material FR4 Dimensions         13x330 mm LED-Typ Samsung, 7 in series eachtotal 2x 7 LEDs Voltage designed for 24V,KSQ A6260 or series resistorscalculate according to LED type Instruction/Overview Twin LED Stripe