LED-Driver

The 1 x 8 amp driver offers only one output and is therefore only suitable as a dimmer. Due to the 8 amps, however, very powerful LED components can be connected. At 24 volts, for example, LED components up to 170 watts are possible. The driver is installed between the power supply and the LED component. It is ideally suited for small and medium installations, as well as a supplement for larger installations. The driver belongs to the LK55 series and can be combined with all dimmer remote controls available there.    NOTES: All drivers of our LK55 series remember the last setting even in case of power loss. RGBW and CCT color temperature remote controllers have no function on the LK55-2 LED dimmer.   Technical data: Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 1 x 8A Min. dim level: <1% (for RGB/W <3%)Connection: input: V+/ground, push button; output: V+/groundIP class: IP 20 Dimensions: LxWxH 95x37x20mm   Operation via pushbutton input The LK55-2 offers 2 green screw terminals on the back for a button input. For example, a simple pushbutton can be connected to this and thus control the light without radio. Short keystroke switches the LEDs on and off. Long keystroke dims the LEDs up and down. Instead of a pushbutton, in principle only 2 cables can be connected, which are then held together short or long. Video tutorial for dimming via radio Video tutorial for dimming via cable with PUSH DIM

Universal driver with 4 outputs, each capable of carrying 4 amps. When used as a dimmer, 4 parallel outputs are available, which are controlled identically. The designations "RGBW" and "cw" and "ww" can be ignored in this case. When used as a color temperature driver, 2 outputs each are available for warm white ("ww") and cool white ("kw") LEDs. Note the corresponding labeling on the driver. When used as an RGB(W) driver, the 4 outputs take over the separate control of the red (R), green (G), blue (B) and possibly white (W) LEDs. The outputs are labeled accordingly. The driver is installed between the power supply and the LED components (e.g. LED strips, LED panels). Notes: All drivers of our LK55 series remember the last setting even in case of power loss.  If you want to operate several light zones independently of each other, several drivers are always necessary. Drivers with several outputs (like here 4 x 4A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel). Technical data: Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 4A per output portMin. dim level: <1% (for RGB/W <3%)Connection: input: V+/ground; output: 4x minus,V+IP class: IP20 Dimensions: LxWxH 179x46x22mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. 

ZigBee universal LED driver for PHILIPS HUE, OSRAM LIGHTIFY, IKEA TRADFRI oder AMAZON ALEXA. The LK115-U can be used for all LED applications. Depending on the setting, it works as: ZigBee LED dimmer for white and single color LEDs ZigBee CCT driver for LED lighting with adjustable color temperature ZigBee RGB driver for color effects ZigBee RGBW driver for solutions with color effects and extra white ZigBee RGB+CCT driver The respective function can be set at the beginning via a DIP switch. The LK115 series works with the ZigBee 3.0 standard. This makes it compatible with established systems such as Philips HUE or Ikea TRADFRI. LED strips with 12V or 24V can be connected to the driver. Also LED spots, LED panels and other components with this function and constant voltage can be operated.  Video instructions for integration with PHILIPS HUE Voice control via AMAZON ALEXA Also the control via voice assistant like AMAZON ALEXA / ECHO is possible. The simplest option here is AMAZON ECHO PLUS or ECHO SHOW with which you can directly control the ZigBee LED driver by voice. For other ALEXA systems you can realize voice control via a gateway. Since there are already corresponding ALEXA Skills for the established gateways of Philips HUE or Ikea TRADFRI, all LED strips connected to the ZigBee driver can also be controlled by voice here. You can find detailed instructions on this in our blog post "Lighting control with Amazon Alexa". Other ZigBee components, such as ZigBee light switches, ZigBee remote controls, etc., which comply with the ZigBee 3.0 standard, can of course also be integrated.   Scope of delivery: 1 x ZigBee Universal LED driver LK115-U Technical data: Modes: Dim | CCT | RGBW | RGB+CCTVoltage: 12V-24V DCPower: Power supply via external switching power supply (not included)Outputs: 5 x 4A Connection: Input (V+ | Ground) Output (5 channels | V+)IP class: IP 20Dimensions (L*W*H): 145*47*16mm ​Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.  The driver is integrated as 1 luminaire in all modes. In RGBW mode, for example, the options for setting color effects and controlling white light are then available for 1 luminaire. See also our instruction videos above.   Dimensions: