Repeater / accessories
Repeater to support controllers in powerful LED installations, as well as other accessories for LED controllers.
App control: WLAN converter for LK55 driver
€89.00*
This converter from WLAN to the LK55 radio standard makes it possible to control the complete LED lighting via smartphone.A selection of suitable apps for Android and iOS is available:
EasyLighting App for Android / für IOS
RealColor App for Android / für IOS
The WLAN operation is carried out in the standard via its own access point, which is integrated in the converter. This is the state of the art.
In addition, the converter can also be set as a WLAN client via an integrated configuration page. This is a novelty in this device class! Thus, the converter is connected to an existing WLAN at home and provides its services without changing the network.
A particularly fast integration results when the converter is connected to the existing WLAN via the built-in, classic RJ45 network connection by cable. The apps then find the converter automatically and no configuration is necessary.
Technical data:
Connection: 12V DC mains input, RJ45 network jackIP class: IP 20
Dimensions (L*W*H): 110*85*24mm
A suitable power supply is included in the set.
Functionality of the app
In the following video the app is shown in combination with the LK35 WLAN driver.
However, it works identically in combination with the LK55bridge:
Product number:
LK55bridge
Connection cable for driver with double input
From
€2.90*
Y-cable for driver with double input. This allows both inputs of the driver to be used and effectively splits the current load.
2 variants are available:
0,75mm² for connections up to 12A
1,5mm² for connections up to 25A
Note: Due to the wide wire end ferrules on the power supply side, the connection cables do not fit into typical WAGO terminals here. Instead, use e.g. classic luster terminals.
Product number:
K0910mas
LED Repeater / Amplifier | 1 x 8A
€26.00*
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 8 amps output power. Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater. Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.
Product number:
LK108
LED Repeater / Amplifier | 4 x 6A
€35.00*
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each. Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater. Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.
Technical data:
Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20
Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number:
LK51
Multi LED driver for DALI, 1-10V, PushDim & PhaseCut | 2 x 10A
€69.00*
Multifunctional LED controller with 2 x 10A output power for various control types:DALI DT6 (1 address)0/1-10V PushDim (230V)230V PhaseCut (TRIAC)
This means that the controller can be used in a wide variety of setups and, for example, integrate an installation with LED strips into existing control concepts. With an output power of 2 x 10 amps, it is also well equipped for large LED installations.
Wiring examples 0/1-10V
DALI
230V PushDim
230V PhaseCut
Scope of delivery:
1 x driver LK145
Technical data
Outputs: 2Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 10A per outputInput: (V+/ground,
PhaseCut,
DALI in / PushDim, 0/1-10V)Output: (2 x LED)IP class: IP 20Ambient temperature: -20°C - +50°CDimensions: LxBxH 170x54x28mm
Note: The controller has double voltage inputs (++--). If the connected load is high (> 200 watts), use our special Y connection cables to split the current load between both inputs. The two large power supply units HLG-480 and HLG-600 already have dual voltage outputs so that both voltage inputs of the controller can be used directly.
Dimensional drawings:
Product number:
LK145