Cable
Various cables for your LED installation.
Twin strand 0,5 - 2,5mm²
From
€1.35*
Twin stranded wire is also available in other cross sections:
0,5mm²
0,75mm²
1,5mm²
2,5mm²
The stranded wire is available in the colors red/black and partly also white.
Price per running meter.
Technical Data:
Product number:
K01mas
CCT flat ribbon cable 3x0,5mm²
€1.30*
This cable is a universal flat ribbon cable with 3 wires of 0.5mm² each in the colors brown, yellow & white. It can be used for applications with CCT strips (BiColor) or any other application that requires 3 core cables.
Scope of delivery: 3-core ribbon cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Technical data:
3 cores 0,5mm² (20 AWG)
Outer dimensions: 5x2mm
Product number:
LK59-3
CCT cable 3x1mm²
€2.50*
This cable is a universal round cable with 3 wires of 1mm² each in the colors green/yellow & 2 x black (coded with "1" & "2". It can be used for applications with CCT strips (BiColor) or any other application that requires 3 core cables.
Scope of delivery: 3-core round cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Technical data:
3 cores 1mm² (18 AWG)
Outer dimensions: 5x2mm
Product number:
K13
RGB flat ribbon cable 4x0.25mm²
€1.39*
This cable is a universally applicable ribbon cable with 4 cores with 0.25mm² each in the colors black, green, blue, red. It can be used for RGB applications up to max. 2.5A total load.
Scope of delivery: RGB cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Technical data:
4 cores 0,25mm²
Range of use cable maximum 2.5 ampere
Product number:
LK16
RGB cable 3x0,25mm², 1x0,75mm² - white
€1.98*
This cable is specially designed for use with RGB solutions. The problem that the common connection is always loaded with 3 times the current is thus solved. In addition, the cables are kept accordingly RGB-colored and thus safe to connect.
Scope of delivery: RGB cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Technical data:
3 cores 0,25mm² | 1 core 0,75mm² PVC (Y), unshielded according to UDE0207, color: white temperature range: -30° to + 70°C dormant, -5° to +70°C moving Outer diameter: 5,3 mm Max. current load: 2,5 Ampere per color (7,5A total) Voltage: up to 24V DC
Product number:
l4s-002g
RGB-Cable 3x0,5mm², 1x 1,5mm² - green
€2.40*
This cable is specially designed for use with RGB solutions. The problem that the common connection is always loaded with 3 times the current is thus solved. In addition, the cables are kept accordingly RGB-colored and thus safe to connect.
Scope of delivery: RGB cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Note
It can be difficult to solder the common positive wire with 1.5mm² cross-section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:
1. after you have stripped the 1.5mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the cable is much easier to solder to the LED strip.
2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.75mm². Solder this to the LED strip and then connect it to the 1.5mm² positive wire of the RGBW cable. For the connection, you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp it and (before!) slide a heat shrink tube over it for insulation.
A reduced cable cross-section is unproblematic for the short distance.
Technical data:
3 cores 0,5mm² | 1 core 1,5mm²PVC (Y), unshielded according to UDE0207Temperature range: -30° to +70°C dormant, -5° to +70°C movingOuter diameter: 6.6mmMax. Current load: 5 Amps per color (15A total) Voltage up to 24V DC
Product number:
l4s-001
RGBW flat ribbon cable 5x0,5mm²
€1.49*
This cable is a universal flat ribbon cable with 5 wires with 0.5mm² each in the colors black, white, green, blue, red.
Scope of delivery: RGBW cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Technical data:
5 cores a 0,5mm²
Product number:
LK59
RGBW-Cable 4x0,25mm² + 1x0,8mm² - black
€1.85*
This cable is optimal suitable for our 4in1 RGBW LED strips. All color line power (RGB and white) have a diameter of 0.25mm². For the common voltage supply (common plus) 0.8mm² are available.
Scope of delivery: RGBW cable - length according to your quantity specification
Note
It can be difficult to solder the common positive wire with 0.8mm² cross-section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:
1. after you have stripped the 0.8mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the wire is much easier to solder to the LED strip.
2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.5mm². Solder this to the LED strip and then connect it to the 0.8mm² positive wire of the RGBW cable. For the connection, you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp them and (before!) slide a heat shrink tube over them for insulation.
Technical data:
Max. Current load: 8A total, 2A per channel
Temperature range: -5° to +70°C
Outer diameter: 6mm
Product number:
l4s-025
RGBW cable 4x0,35mm² + 1x1,0mm² - white
€2.20*
This cable is optimal suitable for our 4in1 RGBW LED strips. All color line power (RGB and white) have a diameter of 0.35mm². For the common voltage supply (common plus) 1.0mm² is available. This cable has a PVC jacket and is therefore more flexible than the halogen-free version.
Scope of delivery: RGBW cable - length according to your quantity specification
Note
It can be difficult to solder the common positive wire with 1.0mm² cross-section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:
1. after you have stripped the 1.0mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the wire is much easier to solder to the LED strip.
2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.5mm². Solder this to the LED strip and then connect it to the 1.0mm² positive wire of the RGBW cable. For the connection, you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp them and (before!) slide a heat shrink tube over them for insulation.
Technical data:
Max. Current load: 10A total, 3.5A per channel
Temperature range: -5° to +70°C
Outer diameter: 7mm
PVC sheathing
Product number:
l4s-027
RGBW cable 4x0,35mm² + 1x1,0mm² - white, halogen free
€2.20*
This cable is optimal suitable for our 4in1 RGBW LED strips. All color line power (RGB and white) have a diameter of 0.35mm². For the common voltage supply (common plus) 1.0mm² is available. This cable has a halogen-free jacket and is therefore quite rigid.
Scope of delivery: RGBW cable - length according to your quantity specification
Note
It can be difficult to solder the common positive wire with 1.0mm² cross-section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:
1. after you have stripped the 1.0mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the wire is much easier to solder to the LED strip.
2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.5mm². Solder this to the LED strip and then connect it to the 1.0mm² positive wire of the RGBW cable. For the connection, you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp them and (before!) slide a heat shrink tube over them for insulation.
Technical data:
Max. Current load: 10A total, 3.5A per channel
Temperature range: -5° to +70°C
outer diameter: 7mm
halogen free
Product number:
l4s-026