DALI LED DRIVER

With the components listed here, you can integrate LED strips, LED spots, panels and more into a DALI lighting control system.

DALI LED driver DT8 universal | DALI master function | 4x4A

LED controller for DALI operation with 4 x 4 Amp outputs. DALI mode Since the driver is capable of DT8, it can be operated in different modes: RGB(W) CCT tunablewhite with 2 outputs each for warm white & cool white XY coordinates for color control The mode is selected via the small display on the driver, as is the setting of the DALI address. The address can also be assigned automatically by the DALI master.DALI master functionThe controller can take over DALI master functions and therefore does not require a separate DALI master. Typical DALI functions such as assigning to groups and scenes, setting fade times, min. brightness level, power on behavior and much more can be carried out directly on the controller. Wiring example Scope of delivery: 1x Receiver LK124 Technical data: Channels: 4Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 4A per output portInput: (V+/ground, DALI in)Output: (4 x LED channel, V+, DALI out)IP class: IP 20Ambient temperature: -20°C - +50°CDimensions: LxWxH 170x54x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Dimensional drawings:

Product number: LK124

€69.00*

DALI LED driver DT8 universal | PushDim function | 5x4A

LED controller for DALI and convenient PUSH DIM operation. In addition to DALI functionality, this controller also allows extensive PUSH DIM control, so that, for example, when using appropriate CCT LED strips, on/off, dimming and changing the color temperature are possible with just one light switch.DALI mode Since the driver is capable of DT8, it can be operated in different modes: RGB(W) RGB+CCT CCT tunablewhite with 2 outputs each for warm white & cool white White channels with 5 parallel outputs XY coordinates for color control The mode is selected via the small display on the driver, as is the setting of the DALI address. The address can also be assigned automatically by the DALI master. Wiring for RGBW and XY mode Wiring for CCT mode Wiring for white mode PUSH DIM mode The driver also offers a very practical PUSH DIM mode. Instead of the DALI signal, a simple pushbutton is then connected. This offers the following functions: Single channel mode: Short press > On / Off | Long press > Dimming CCT tunable white mode:Short press > On / Off | Long press > Dim | Double press > Switch to CCT mode > Long press changes color temperature RGB mode: Short press > On / Off | Long press > Dim | Double press > Change to RGB color mode > Long press changes color I.e. it can realize here, for example, with only one light switch on the wall a convenient control of brightness, color temperature (or color) and on / off. Wiring for PUSH DIM mode (in the example as CCT setup) Scope of delivery: 1x Receiver LK124pro Technical data: Channels: 5Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 4A per output port, 1500Hz PWMInput: (V+/ground, DALI or PUSH DIM in)Output: (4 x LED channel, V+, DALI out)IP class: IP 20Ambient temperature: -20°C - +50°CDimensions: LxWxH 170x54x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Dimensional drawings:

Product number: LK124pro

€75.00*

DALI LED driver DT6 universal | DALI master function | 4x4A

LED controller for DALI DT6 operation with 4 x 4 amp outputs. DALI master functionAdjustable PWM frequency up to 30kHzAdjustable dim curve (lin/log) Setup is carried out via the OLED display on the controller, as is setting the DALI address. However, the address can also be assigned automatically by the DALI master.DALI master functionThe controller can take over DALI master functions and therefore does not require a separate DALI master. Typical DALI functions such as assigning to groups and scenes, setting fade times, min. brightness level, power on behavior and much more can be carried out directly on the controller. Wiring example Scope of delivery: 1x receiver LK149 Technical data: Channels: 4Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 4A per output portInput: (V+/ground, DALI in)Output: (4 x LED channel, V+, DALI out)IP class: IP 20Ambient temperature: -20°C - +50°CDimensions: LxWxH 170x54x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Dimensional drawings:

Product number: LK149

€69.00*

Multi LED driver for DALI, 1-10V, PushDim & PhaseCut | 2 x 10A

Multifunctional LED controller with 2 x 10A output power for various control types:DALI DT6 (1 address)0/1-10V PushDim (230V)230V PhaseCut (TRIAC) This means that the controller can be used in a wide variety of setups and, for example, integrate an installation with LED strips into existing control concepts. With an output power of 2 x 10 amps, it is also well equipped for large LED installations. Wiring examples 0/1-10V DALI 230V PushDim 230V PhaseCut Scope of delivery: 1 x driver LK145 Technical data Outputs: 2Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 10A per outputInput: (V+/ground, PhaseCut, DALI in / PushDim, 0/1-10V)Output: (2 x LED)IP class: IP 20Ambient temperature: -20°C - +50°CDimensions: LxBxH 170x54x28mm Note: The controller has double voltage inputs (++--). If the connected load is high (> 200 watts), use our special Y connection cables to split the current load between both inputs. The two large power supply units HLG-480 and HLG-600 already have dual voltage outputs so that both voltage inputs of the controller can be used directly. Dimensional drawings:

Product number: LK145

€69.00*

DALI bus power supply

Power supply for the DALI bus. Input voltage range: 100-240VAC Output: 16VDC, max. 250mA Installation: Technical data: Dimensions:

Product number: LK109

€79.00*

DALI pushbutton control for up to 4 pushbuttons

Driver version: Master Control

DALI push-button module for controlling up to 4 DALI luminaires via 4 push-buttons. The compact push-button module fits into the flush-mounted box and can be controlled with up to 4 push-buttons. The two rotary switches can be used to set the start address to be controlled, which is then controlled via push-button K1. Push-button K2 controls start address + 1, K3 start address + 2 and K4 start address +3. A short press on the push-button switches the respective channel on or off alternately, a long press dims up or down. Installation: Technical data: Dimensions: Connections:

Product number: LK110

Variants from €55.00*

€69.00*

DALI wall-mounted touch interface | 4 zones

Driver version: Wall switch

Remote control for wall mounting for use with the 4-channel DALI LED controller LK90 from our program. The individual zones can be switched on/off and dimmed via the buttons. Scope of delivery: 1x wall remote control DALI LK88 Technical data: Dimensions: LxWxH 86x86x41mm

Product number: LK88

€55.00*

Beispiel einer DALI Installation: