This decoder is connected to the DMX bus and offers an extremely powerful output of 12A. With this, e.g. single-color 24V LED strip solutions up to a total power of over 250 watts can be controlled. In addition, the decoder offers a PWM signal and a 0-10V control at the output to control other devices via DMX. The DMX address is freely adjustable. Further functions can be set via buttons.
Special features:
OLED display
16 bit / 8 bit DMX data
RDM / DMX In & Out
3 different dimming curves
high frame rate
additional PWM and 0-10V output
Technical data:
Channels: 1Voltage: 12V-24V DCPower: power supply via external switching power supply (not included), 12AConnection: input (V+; ground; DMX input) output (DMX output; CH1; V+; PWM; 0-10V)IP class: IP 20Dimensions: 172x44x30mm
Choose your required accessories for the aluminum profile. E.g. a suitable cover.
The plaster profile TBP13 is currently only available on request. Delivery time approx. 3 weeks.
Technical data:
Width: 89.2 mm
Height: 25 mm
Width inside for LED strips: 21 mm
Delivery time approx. 3 weeks.
LED type: 3528
warm white & cool white mixed
600 LED (300 warm white, 300 cool white)
Color rendering: High CRI>95
Total brightness: approx. 8,500lm
Voltage: 24 Volt DC
Power: 80 Watt
Dimensions: 500x100mm
BiColor LED panel matrix with a total of 600 LEDs on an area of 50 x 10cm. BiColor means that warm white and cool white LEDs are arranged alternately and with the appropriate control, not only the brightness, but also the color temperature can be controlled continuously. With well over 8,000 lumens, this LED array is extremely bright and highly efficient. At a distance of 1m, almost 2,500 lux are achieved. Here are the photometric data:
1m distance: approx. 2.500Lux2m distance: approx. 600Lux3m distance: approx. 280Lux
The BiColor panels are of very high quality and robust design. They can be shortened in centimeter intervals by simply cutting them off and thus can be changed to smaller panels of any size. At each centimeter section are the corresponding contacts for a power supply. You can even make 50 small 1x10cm panels if needed.
Notes on accessories:
For the operation of a 50x10cm panel a 24V power supply with 100 Watt is recommended.
https://shop.led-studien.de/de/zubehor/netzteile/24v-netzteile
For brightness and color control a 2-channel controller with min. 4 amps is needed. 80W / 24V = 4 Amps.
https://shop.led-studien.de/de/controller/dimmer-1-2-kanal
Answers to frequently asked questions can be found in our FAQ.
This KNX driver is designed for 4-channel LED applications and can therefore be used, for example, to control RGBW LED systems or to dim 4 independent zones with white LEDs. Each of the 4 outputs can be loaded with 4A, which makes even very large installations feasible.
The LED driver works with all known KNX drivers.
Standalone operation
Via the 4 buttons A, B, C, D the channels can also be switched (short press) and dimmed (long press) directly. This makes it possible, for example, to test the LED installation even before the driver is integrated in KNX.
Scope of delivery:
1x Receiver LK85Download EPS application:
https://www.led-studien.de/lk85-ets
Technical data:
Channels: 4Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 4A per output portConnection: input (V+/ground, KNX) output (4xLED channel, V+)IP class: IP 20Dimensions: LxWxH 166x54x23mm
Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
LEDbar products are modern, stylish and functionally versatile LED modules in aluminum profile. There is a wide range of accessories with which the modules can be installed individually according to your situation.
LEDbar modules are available in lengths of 15cm, 30cm and 60cm. Furthermore, the modules are available in warm white as well as neutral white. The special feature of these modules with Nichia LEDs is the high color quality with CRI>90 (color rendering index).
All LED bar modules are supplied with a transparent cover.
Technical data:
Voltage: 24V DC
Power: 3,4W per 15cm
Width: 19,6mm
Height: 13,2mm
Ultra-flat LED panel with only 5mm construction depth. Satin finish and therefore much less sensitive to scratches and fingerprints than ordinary LED panels.
The quarter circle panels are primarily suitable for accent and decorative lighting but with 475lm (equivalent to a 40W incandescent lamp) they are also sufficiently bright for lighting at least smaller rooms. For example, 4 of the quarter circle panels can be used to form a large circle with a diameter of 40cm, which can be the basis for an ultra-slim LED ceiling light, LED pendant light or LED wall light.
With their large illuminated area, the LED panels provide a very pleasant, soft light. With a high color quality of CRI>90*, it is also suitable for demanding lighting tasks, such as in the living room, office or business premises.
Mounting via supplied adhesive pad or by means of 4 screws and associated cover caps.
Operating temperature -20 to +40°C
IP20 not water protected
*Specification according to manufacturer. Randomly checked and confirmed by LED studies.
Scope of delivery:
LED panel incl. 2m connection cable
4 screws for mounting + cover caps
Adhesive pad on the back for mounting without screws
Notes on accessories:
For the operation of one panel a 12V power supply with min. 8 Watt (incl. 10% safety) is required.
For a brightness control of a panel a driver with min. 0.7 Amps is needed. 8W / 12V = 0.7 Amps.
If several panels are used, you can simply multiply the specified values for watts and amps. For 4 panels, for example, a 12V power supply with 4 x 8 = min. 32 watts is required.
This ready-to-use matrix consists of 70 pixels SuperLEDs (APA101) in a 7x10 arrangement. Each pixel can be controlled individually. The matrix is very flexible in the size of 21x30cm and can also be mounted on uneven surfaces. Several of these panels can be connected very easily via a tongue and groove system. So you can quickly build up a larger system.
They are controlled by digital LED drivers that support this type of LED. Available are drivers with SD card and also online drivers, which are controlled via Ethernet. Animation software is included with the driver.
SuperLED is a LED specially designed for matrix projects with an integrated pixel driver in the LED package. Another advantage of this LED is that in addition to the 8-bit per color, it also supports a true-color dimming of 5-bit (i.e. 32 levels). This is unique.
Technical data:
LED type
SuperLED APA101 RGB, 8-bit per color + 5-bit brightness
Power consumption
max. 60mA per Pixel
Voltage
5V DC stabilized
Size
approx. 21 x 30cm
LED pixel
7 x 10 (70 Pixel)
This ready-to-use matrix consists of 150 pixels SuperLEDs (APA101) in a 15x10 arrangement. Each pixel can be controlled individually. The matrix is very flexible in the size of 30x20cm and can also be mounted on uneven surfaces. Several of these panels can be connected very easily via a tongue and groove system. So you can quickly build a larger system.
They are controlled by digital LED drivers that support this type of LED. Available are drivers with SD card and also online drivers, which are controlled via Ethernet. An animation software is included with the driver.
SuperLED is a LED specially designed for matrix projects with an integrated pixel driver in the LED package. Another advantage of this LED is that in addition to the 8-bit per color, it also supports a true-color dimming of 5-bit (i.e. 32 levels). This is unique.
Technical data:
LED type
SuperLED APA101 RGB, 8-bit per color + 5-bit brightness
Power consumption
max. 60mA per Pixel
Voltage
5V DC stabilized
Size
approx. 30 x 20cm
LED pixel
15 x 10 (150 Pixel)
Ultra-flat LED panel with only 5mm construction depth. Satin finish and therefore much less sensitive to scratches and fingerprints than ordinary LED panels.
With 100 lumens, the triangular panels are primarily suitable for accent and decorative lighting. However, several of the panels in combination can certainly provide main room lighting.
With their enlarged illuminated area, the LED panels provide a very pleasant, soft light. With a high color quality of CRI>90*, it is also suitable for demanding lighting tasks, such as in the living room, office or business premises.
Mounting via supplied adhesive pad or by means of 3 screws and associated cover caps.
equilateral triangle (3x60° interior angle, suitable for forming hexagons)
Operating temperature -20 to +40°C
IP20 not water protected
*Specification according to manufacturer. Randomly checked and confirmed by LED studies.
Scope of delivery:
LED panel incl. 2m connection cable
3 screws for mounting + cover caps
Adhesive pad on the back for mounting without screws
Notes on accessories:
For the operation of one panel a 12V power supply with min. 2.2 Watt (incl. 10% safety) is required.
For a brightness control of a panel a driver with min. 0.2 Amps is needed. 2.2W / 12V = 0.2 Amps.
If several panels are used, you can simply multiply the specified values for watts and amps. For 4 panels, for example, a 12V power supply with 4 x 2.2 = min. 8.8 watts is required