12V POWER SUPPLIES
- Ultra compact slimline power supplies, e.g. for installation in furniture or in narrow coves
- HLG power supplies with the highest quality components and extremely quiet operation even with PWM dimmers connected downstream
- RS power supplies (only versions without fan) for larger projects
- low-cost LPV power supplies and plug-in power supplies for smaller LED applications
Slimline power supply 12V - 8.4A - 100 Watt
€46.00*
Snappy Slimline Switching Power Supply SNP100-12VF-1
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
Certifications: UL, CB, CE
The slimline power supplies of the Slimline series are ideally suited for installation in furniture and luminaires or generally wherever other power supplies cannot find a place.
Technical data:
Model
SNP100-12VF-1
Voltage
12V
Maximum power
100W
Current
8.33A
Output voltage
12 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
320x30x18mm (LxWxH)
Weight
220g
Product number:
LED1151
Power supply HLG 12V - 5A - 60 Watt, extremely quiet
€54.00*
Meanwell switching power supply HLG-80, 12V / 5A / 60W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-80-12
Voltage
12V
Maximum power
60W
Current
5A
Adjustable voltage range
10,8 - 13,5V
Overcurrent protection
95...108%
Inrush current, max.
70A
Voltage input
90...305V AC (47...63Hz), 127...431V DC
Power factor
0,96
Working temperature
-40...+70°C
Dimensions
195x62x39mm (LxWxH)
Weight
840g
Product number:
LED1169
Power supply 12V - 12.5A - 150Watt
€64.00*
Meanwell switching power supply HLG-150, 12V / 12.5A / 150W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note on the connection of LED drivers
The HLG-150-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.
Technical data:
Model
HLG-150-12
Voltage
12V
Maximum power
150W
Current
12.5A
Adjustable voltage range
10,8 - 13,5V
Voltage input
230VAC
Overcurrent protection
95...108%
Inrush current, max.
65A
Input voltage range
90...305V AC (47...63Hz), 127...431V DC
Power factor
0,92
Working temperature
-40...+70°C
Dimensions
228x68x39mm (LxWxH)
Weight
1,150g
Product number:
LED1165
Power supply HLG 12V - 16A - 192 Watt, extremely quiet
€79.00*
Meanwell switching power supply HLG-240, 12V / 16A / 192W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note on the connection of LED drivers
The HLG-240-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.
Technical data:
Model
HLG-240-12
Voltage
12V
Maximum power
192W
Current
16A
Adjustable voltage range
6 ~ 12V
Overcurrent protection
95...108%
Inrush current, max.
75A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
244.2x68x38.8mm (LxWxH)
Weight
1,300g
Product number:
LED1129
Power supply HLG 12V - 22A - 260 Watt, extremely quiet
€110.00*
Meanwell switching power supply HLG-320, 12V / 22A / 260W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note on the connection of LED drivers
The HLG-320-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.
Technical data:
Model
HLG-320-12
Voltage
12V
Maximum power
260W
Current
22A
Adjustable voltage range
10,8 - 13,5V
Overcurrent protection
95...108%
Inrush current, max.
70A
Voltage input
90...305V AC (47...63Hz), 127...431V DC
Power factor
0,92
Working temperature
-40...+70°C
Dimensions
252x90x44mm (LxWxH)
Weight
1,880g
Product number:
LED1168
Power supply RS 12V - 6A - 75 Watt
€28.50*
Meanwell switching power supply 12 Volt / 6 Amp / 75 Watt
Certifications: UL,TÜV,CB,CE
Technical data:
Model
RS-75-12
Voltage
12V
Maximum power
75W
Current
6A
Dimensions
129x98x38mm (LxWxH)
Weight
410g
Product number:
LED1006
Power supply RS 12V - 12A - 150 Watt
€36.90*
Meanwell switching power supply RS-150-12, 12 Volt / 12,5 Ampere / 150 Watt
G3 series
Input voltage range from 88...132/176...264V AC, 47...63Hz and 248...373V DC
Screw terminals
Overload protection by shutdown, auto recovery, short circuit proof
2.0A nominal input current at 230V
40A inrush current at cold start with 230V
Certifications: UL,TÜV,CB,CE
Technical data:
Model
RS-150-12
Voltage
12V
Maximum power
150W
Current
12.5A
Voltage input
230VAC
Overcurrent protection
110...150%
Overvoltage protection
115...135%
Inrush current, max.
40A
Input voltage range
88...132/176...264V AC, 47...63Hz and 248...373V DC
Working temperature
-25...+70°C
Dimensions
199x98x38mm (LxWxH)
Weight
700g
Product number:
LED1118
Table power supply 12V - 6.7A - 80 Watt
€39.27*
Meanwell desktop switching power supply GS90A12 with 12V/80W, max. 6.67A (picture similar)Hollow plug secondary
Universal input
protected against short circuit, overload, overvoltage
Insulation class I
complies with Energy Star Level IV
No-load power, max.: 0.5W
Input connector: C14 (EN60320-1)
Scope of delivery:1 switching power supply without power cord
Technical data:
Model
GS90A12
Voltage
12V
Maximum power
80W
Current
6.67A
Output voltage
12 VDC
Voltage input
90...264V AC (47...63Hz), 135...370 DC
Working temperature
0...+50°C max.
Supply line length
12...15V: 1m
Dimensions (output connector)
2.5x5.5 (LxWxH)
Weight
450g
Product number:
LED1025
Plug power supply 12V - 2A - 24 Watt
€13.90*
Plug-in power supply 12V/2A/24W
Universal input
insulation class II
very compact design
overload and short circuit proof
input voltage range : 100-240V AC
coaxial connector 2,1mm inner diameter (+) and 5,5mm outer diameter (-)
Product number:
LED1153
Power supply types
HLG
HLG power supplies are the highest quality power supplies in the range. Passively cooled and solidly built with IP67 moisture protection. HLG power supplies work very well with LED controllers, are quiet and therefore always the first choice when it comes to LED installations.
SLIMLINE
Slimline power supplies are used when on-site installation conditions do not allow high-quality HLG power supplies. They are extremely slim and flat, but more susceptible to noise (whistling, buzzing) as soon as an LED controller or dimmer is connected downstream.
RS power supplies
RS power supplies are open power supplies, which are installed in larger housings, e.g. together with pixel controllers or similar.
LPV, TABLE and PLUG POWER SUPPLIES
These are simple power supplies for rather small installations without LED controllers or dimmers. In combination with controllers or dimmers, these tend, like all inexpensive power supplies, to produce noise (whistling, buzzing). If possible, use high-quality HLG power supplies here.
Tip:
LED-Studien advises against the use of dimmable power supplies when operating LEDs! The only exception are PWM power supplies, which directly output a pulsed PWM signal (pulse width modulation) and thus enable convenient brightness control. PWM is the standard for precise dimming of LEDs. Dimmable power supplies from the ELG or HLG series, however, work without PWM! Dimming works there only conditionally and generally requires to go up to the power limit of the power supply, which is however unfavorable for the life span of the power supply. Dimming down to 0, i.e. OFF, is not possible at all with these power supplies. This only works with PWM power supplies or with a downstream controller, like our LK55 series.