LED-Stripes, LED-Spots & Co.

RGB LED + warm white LED alternately 60 RGB-LED/m + 60 WW-LED/m Brightness: 1.000lm/m for white + 650lm/m RGB Color rendering for white: CRI>95 Voltage: 24V Power: 28,8 Watt/m Price for 1 roll = 5 meters - Buy by the meter - New development of LED Studien The RGB+WW LED strip is optimized for lighting that requires a bright warm white with excellent color quality and additional RGB color effects.  For this purpose, powerful RGB LEDs (type 5050) were combined with the highest quality warm white LEDs (type 5630) in 3,000K with an excellent color quality of CRI95+. A common application for the RGB+WW LED strip is the indirect lighting of entire rooms. At 1,000 lm/m, the warm white LEDs are bright enough to illuminate an entire room. No additional luminaires are needed for this. Color temperature adjustment by means of RGBW LED strips The white LEDs on the ribbon have a color temperature of approx. 3,000K warm white. At full brightness of the white LEDs, a color temperature range of 2,700K - 5,000K (daylight white) can be set by mixing in the color LEDs. By slightly dimming the white LEDs, even 2,500 - 6,000K is possible. Available variants 5m-Roll IP20 without water protection, incl. 10cm connection cable 10m-Roll IP20 without water protection, incl. 10cm connection cable 5m-Roll IP67 water protection in silicone hose, incl. 10cm connection cable Furthermore, the LED tape is available as meter goods IP20 in 1 - 30m length. All variants have a 3M adhesive tape on the back for mounting, are divisible every 10cm.   Notes on accessories: To operate 5m (1 roll) of LED strips, a 24V power supply with min. 150 Watt is required.  For a color control of the 5m in 24V version an RGBW driver (4-channel) with min. 1 x 3A ampere for white and 3 x 1A for RGB is needed.  You will find answers to frequently asked questions in our FAQ.  

LED type: 2216 - 120ww+120nw LED/m extra warm white & neutral white mixed Color temperature: 2.200 - 4.000K Brightness: max. 700 + 900 lm/m* Color rendering: High CRI>95 Voltage: 24V Power: 19,2 Watt/m (real approx. 10W/m) Width: 10mm Price for 1 roll = 5 meters - Buy by the meter - This LED ribbon has a special color mixture that uses an extra warm white LED. While typical CCT LED strips only start at 2,700 or 3,000 Kelvin, extra warm LEDs with only 2,200 Kelvin are installed here. This warm white corresponds in color tone (not in brightness!) to a dimmed incandescent light and is therefore intended for particularly comfortable lighting moods.  Alternately, neutral white LEDs with 4,000 Kelvin are installed next to each extra warm white LED. This means that any color temperature can be set between a deep warm white 2,200K, through the typical 2,700 and 3,000K to the neutral, elegant 4,000K. In addition, the LED strip offers exceptionally high color rendering CRI>95 (R9 also >90). This guarantees absolutely natural colors across the entire light spectrum. At 4,000K, the LED strip offers a brightness of 900 lumens/m. At the extra warm white 2,200K, it is then still about 700 lumens/m. This makes the LED strip ideal, for example, when it comes to indirect lighting of small to medium-sized rooms. *Many LED drivers, such as our LK55 series, keep the brightness of CCT LED strips constant, regardless of the selected color temperature. This means that at a medium color temperature like 4,000 Kelvin, warm white and cool white LEDs are not controlled with 100% each (which would mean 19.2W/m power consumption), but only with approx. 50% each. Thus, the LED strips are always equally bright, no matter which color temperature is set and also the power consumption remains constant at only about 10W/m.   Available versions 5m roll IP20 without water protection, incl. 10cm connection cable The LED tape is also available by the meter in IP20 in lengths of 1 - 30m. All versions have a 3M adhesive tape on the back for mounting and can be divided every 5cm. Notes on accessories: To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.https://shop.led-studien.de/de/zubehor/netzteile/24v-netzteile For brightness controll of 5m a controller with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere. https://shop.led-studien.de/de/controller/dimmer-1-2-kanal  It is best to use the LED strip with a suitable aluminum profile or other solution for cooling. Due to the high power, the LEDs would lose brightness and lifetime very quickly without an aluminum profile. We recommend aluminum profiles with cover to protect the LEDs like our PL1. Answers to frequently asked questions can be found in our FAQ.  

LED type: COB - no single LEDs visibleBeam angle: 120°Brightness: 1,300 lm/mColor rendering: High CRI>90Voltage: 24 VoltPower: 14 Watt/m Price for 1 roll = 5 meters -Buy by the meter - New type of LED tape where no individual LEDs are visible! A continuous bright, uniform light band is created.  This has advantages for various applications: Homogeneous line light, even in very flat aluminum profiles. Continuous, narrow accent or orientation light Absolutely uniform indirect lighting at very short distances The COB LED-Strips are also very efficient - approx. 100 lumens / watt - and can be processed just as flexibly as normal LED strips. Short pitch distances (only 4.5cm) allow the adjustment to desired dimensions and due to the double-sided adhesive tape on the back, the COB LED-Strips are very easy to install.  The continuous light effect without visible individual LEDs in the COB LED-Strip is achieved by a new process. With white LEDs, the light has always been generated by a converting phosphor layer. Now, instead of applying a separate, tiny phosphor layer to each LED chip - as it is usually the case - COB LED-Strips cover the entire 5m strip in one piece with a continuous phosphor. The result is a uniformly homogeneous band of light, as in color, so in brightness.   Available Variants 5m-roll IP20 without water protection, incl. 10cm connection cable 5m-roll IP67 water protection in silicone tube, incl. 10cm connection cable Furthermore, the LED tape is sold by meter IP20 in 1 - 30m length. All variants have a 3M adhesive tape on the back for mounting, can be divided every 4.5cm and are available in various color temperatures (e.g. 3.000K warm white).     Notes on accessories: To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.https://shop.led-studien.de/de/zubehor/netzteile/24v-netzteile For brightness controll of 5m a controller with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere. https://shop.led-studien.de/de/controller/dimmer-1-2-kanal   Frequently asked questions:   Can COB LED-Strips be used like normal LED Strips? Yes. COB-LED-Strips can be laid, cut and connected just as flexibly as normal LED-Strips. The solder contacts for connecting cables are also exposed.   What is the height of the COB LED-Strips? Only 1.5mm. COB LED-Strips are not significantly higher than normal LED strips and therefore fit, for example, in all standard aluminum profiles. The IP67 versions have the typical height of 4mm due to the surrounding silicone tube.   Does the phosphor coating reduce the lifetime of the LEDs? No. COB technology has been used for many years in numerous high-power LED modules (up to 100 Watt output), where the temperature input into the phosphor coating is immensely high. There is no known reduction in lifetime here.   Are COB-LED-Stips water-protected, e.g. suitable for outdoor use? For this purpose, choose the variants with IP67 water protection.   You can find more answers to frequently asked questions about LED strips in our FAQ.