DMX Driver
LED DMX drivers enable the integration of various LED components into professional DMX environments. These can be LED strips, LED bars and profiles, but also LED spots, panels and much more.
We offer LED DMX drivers in various designs, suitable for a variety of applications:
- Highend LED DMX driver with RDM function and 5 outputs up to 192 Watt connected load
- driver with up to 30.000Hz PWM, e.g. for high speed film & TV
- Micro DMX driver for integration in profiles and everywhere where little space is available
- DMX-to-SPI converter for 2801, 2811, 2812 etc.
Some of the LED DMX drivers are proprietary developments of LED-Studien.de We can also develop special driver variants for you.
5 channel DMX/RDM LED driver, 5x8A, 30kHz, 16 bit - XLR-5
€68.50*
XLR input:
5-pin
A LED DMX driver that leaves nothing to be desired! Of course also RDM compatible. The powerful 5 x 8A outputs can supply e.g. per single output LED strips up to 192 watts and that in 8 bit or 16 bit resolution. The control of RGB, RGBW or RGBA strips is of course also possible.
The PWM frequency can be adjusted in 10 steps from 500 - 30,000Hz. So even slow motion recordings up to 500 frames/s and beyond are no longer a problem. Additionally, different dim curves can be set (gamma curve 0.1 - 9.9, logarithmic or linear).
The following DMX/RDM standards are possible: DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 - 2006 ESTA standard)
Standalone mode / Master mode
Simple color and brightness adjustments can also be made directly on the driver (without DMX console or similar).
Brightness adjustment of all 5 channels separately
Cold white / warm white mixture (tunable white)
Simple RGB mixed colors
32 effect programs (16 speed levels)
Technical data:
Channels: 5 - e.g. RGBAW, or RGB + 2 white tones.PWM frequency: 500 - 30.000Hz, adjustableVoltage: 12V-24V DCPower: power supply via external switching power supply (not included), 8A per channelInput: DMX via XLR 3pin, DMX via RJ45, DMX via cable clamps, DCin double ratedOutput: V+, channel 1-5IP class: IP 20Dimensions: 73*164*38mm
Product number:
LK93-5
12 channel DMX/RDM LED driver, 12x5A, 35kHz, 16 bit
€125.00*
This DMX driver in a robust metal housing offers 12 outputs with up to 5A output power each. For example, 3 powerful RGBW LED installations can be operated in parallel, as well as 4 x RGB, 6 x Tunable White or 12 individual channels with e.g. pure white LED strips.
The DMX signal can be connected via typical XLR-5pin connectors or RJ45. Thereby the driver is also RDM compatible. For DCin and the connection of the LED components the driver offers screw terminals.
The PWM frequency can be adjusted in 10 steps from 500 - 35,000Hz. This means that even slow motion shots up to 500 frames/s and beyond are no longer a problem. Additionally, different dim curves can be set (gamma curve 0.1 - 9.9, logarithmic or linear).
The following DMX/RDM standards are possible: DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 - 2006 ESTA standard)
Standalone mode / Master mode
Simple color and brightness adjustments can also be made directly on the driver (without DMX console or similar).
Brightness adjustment of all 12 channels separately adjustable from 0-100
4 simple effect programs (chaser) in 9 speed levels
Technical data:
Channels: 12PWM frequency: 500 - 30.000Hz, adjustableVoltage: 12V-24V DCPower: power supply via external switching power supply (not included), 5A per channelInput: DMX via XLR 5pin, DMX via RJ45, double DCinOutput: V+, channel 1-12, DMX. RJ45IP class: IP 20Dimensions: 166*100*38mm
Product number:
LK123
24 channel DMX/RDM LED driver, 24x4A, 35kHz, 16 bit
€195.00*
This DMX driver in a robust metal housing offers 24 outputs with up to 4A output power each. For example, 6 powerful RGBW LED installations can be operated in parallel, as well as 8 x RGB, 12 x Tunable White or 24 individual channels with e.g. pure white LED strips.
The DMX signal can be connected via typical XLR-5pin connectors or RJ45. Thereby the driver is also RDM compatible. For DCin and the connection of the LED components the driver offers screw terminals.
The PWM frequency can be adjusted in 10 steps from 500 - 35,000Hz. This means that even slow motion shots up to 500 frames/s and beyond are no longer a problem. Additionally, different dim curves can be set (gamma curve 0.1 - 9.9, logarithmic or linear).
The following DMX/RDM standards are possible: DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 - 2006 ESTA standard)
Standalone mode / Master mode
Simple color and brightness adjustments can also be made directly on the driver (without DMX console or similar).
Brightness adjustment of all 24 channels separately adjustable from 0-100
4 simple effect programs (chaser) in 9 speed levels
Technical data:
Channels: 24PWM frequency: 500 - 30.000Hz, adjustableVoltage: 12V-24V DCPower: power supply via external switching power supply (not included), 4A per channelInput: DMX via XLR 5pin, DMX via RJ45, DCin triple designOutput: V+, channel 1-24, DMX. RJ45IP class: IP 20Dimensions: 265*83*42mm
Product number:
LK122
4 channel DMX/RDM LED driver, 4x4A, 30kHz, 16 bit
€48.50*
This decoder is connected to the DMX bus and occupies 1-4 DMX addresses to control the 4 outputs. Each output channel can be loaded with up to 4A. The voltage range of 12-36V makes it very flexible to use. The DMX start address is adjustable. Further functions (like 8 or 16Bit resolution) can be set by buttons on the display and of course the driver is RDM compatible.
The PWM frequency can be adjusted in 10 steps from 500 - 30,000Hz. This means that even slow motion recordings with high-speed cameras are no longer a problem. Additionally, different dim curves can be set (gamma curve 0.1 - 9.9, logarithmic or linear).
The following DMX/RDM standards are possible: DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 - 2006 ESTA Standard)
Technical data:
Channels: 4 - e.g. RGBW or RGBAPWM frequency: 500 - 30.000Hz, adjustableVoltage: 12V-36V DCPower: power supply via external switching power supply (not included), 4A per channelInput: DMX via cable clamps, DCin double ratedOutput: V+, channel 1-4IP class: IP 20Dimensions: 53*170*28
Product number:
LK25-2
5 channel DMX/RDM LED driver, 5x4A, 30kHz, 16 bit
€55.00*
This decoder is connected to the DMX bus and occupies 1-5 DMX addresses to control the 5 outputs. Each output channel can be loaded with up to 4A. The voltage range of 12-36V makes it very flexible to use. The DMX start address is adjustable. Further functions (like 8 or 16Bit resolution) can be set by buttons on the display and of course the driver is RDM compatible.
The PWM frequency can be adjusted in 10 steps from 500 - 30,000Hz. This means that even slow motion recordings with high-speed cameras are no longer a problem. Additionally, different dim curves can be set (gamma curve 0.1 - 9.9, logarithmic or linear).
The following DMX/RDM standards are possible: DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 - 2006 ESTA Standard)
Technical data:
Channels: 4 - e.g. RGBWA or RGB+WW+CWPWM frequency: 500 - 30.000Hz, adjustableVoltage: 12V-36V DCPower: power supply via external switching power supply (not included), 4A per channelInput: DMX via cable clamps, DCin double ratedOutput: V+, channel 1-5IP class: IP 20Dimensions (LxWxH): 170x59x29
Product number:
LK26-2
4 channel DMX/RDM LED driver, 4x4A, 30kHz, 16 bit - IP67
€75.00*
This waterprotected (IP67) decoder is connected to the DMX bus and occupies 1-4 DMX addresses to control the 4 outputs. Each output channel can be loaded with up to 4A. The voltage range of 12-36V makes it very flexible to use. The DMX start address is adjustable. Further functions (like 8 or 16Bit resolution) can be set by buttons on the display and of course the driver is RDM compatible.
The PWM frequency can be adjusted in 10 steps from 500 - 30,000Hz. This means that even slow motion recordings with high-speed cameras are no longer a problem. Additionally, different dim curves can be set (gamma curve 0.1 - 9.9, logarithmic or linear).
The following DMX/RDM standards are possible: DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 - 2006 ESTA Standard)
Technical data:
Channels: 4 - e.g. RGBW or RGBAPWM frequency: 500 - 30.000Hz, adjustableVoltage: 12V-36V DCPower: power supply via external switching power supply (not included), 4A per channelInput: DMX via cable clamps, DCin double ratedOutput: V+, channel 1-4IP class: IP67Dimensions: 74*181*40 (plus 4 x 30cm cables)
Product number:
LK25-WP
DMX to Digital Converter, 5-24V (for 2801, 2811, 2812 ..)
€54.00*
With this DMX converter, various digital LED strips can be conveniently controlled via DMX512. It offers an extremely wide voltage range of 5-24V as well as 510 channels, whereby for example 170 RGB pixels can be controlled.
Each converter also has a DMX output. The decoder can be set very easily via a large multifunction display and 3 buttons. Essential parameters are:
digital setting DMX start address
different test modes
pixel count configurable
color sequence configurableThe following LED drivers can be controlled:WS2801, 2803, 2811, 2812, 2813, 2815 TM1803, 1804, 1809, 1812, 1814 UCS1903, 1904, 1909, 1912, 2903, 2904 RGBW, 2909, 1912, 6909, 6912 LPD6803, 1101, 8803, 8806 TLS3001, 3002 P9813, 9412 RGBW SK6812 RGBW
Scope of delivery:
1x DMX Digital Converter BC
Technical data:
Voltage: 5-24V DCConnection: Input (V+; Ground; DMX Input) Output (DMX Output; V+; Data; CLK, Ground)IP class: IP 20Dimensions: LxWxH 176x46x30mm
Product number:
LK71
4-channel DMX LED driver - 7-40V - 4x3A - MY9942 MOSFET
€16.80*
Auf Basis des MY-Semi-ICs MY9942 wurde ein kompakter DMX-Receiver mit 4 MOSFETs als Ausgangtreiber für konstante Spannung entwickelt. Dieses Board hat alle bekannten Vorteile des MY9942 Breakout-Boards. So kann die DMX-Adresse per DIP-Schalter eingestellt werden oder per Lötjumper die Anzahl der verwendeten DMX-Kanäle von 1-4.
Neben LED-Streifen können alle LED-Typen angeschlossen werden, die mit konstanter Spannung im Bereich von 7 - 40V betrieben werden.
Die Platine hat die Größe von 40x73mm. Ein separates Gehäuse für die Platine ist ebenso verfügbar.
Weitere Informationen sind in einem Artikel im Blog nachzulesen.
Lieferumfang:
1x Platine Bestückt mit allen SMD-Bauteilen und DIP-Schalter
Verbinder je nach Ausführung - BITTE WÄHLEN SIE EINE VARIANTE!
Product number:
LED521mos
4-channel DMX receiver MY9942, 310mA, screw terminals
€26.90*
Connector:
with screw terminals
|
Electricity:
310mA
Based on the MY-Semi-IC MY9942 a compact DMX receiver with 4 constant current sources (KSQs) for constant current was developed. These are clocked KSQs. The current is fixed on the production side via corresponding resistors. Variants between 300 and 1200mA are offered. With this, different HighPower-LEDs can be operated.
The DMX address can be set by DIP switch and the number of used DMX channels from 1-4 can be set by solder jumper. With one DMX address the 4 outputs are controlled in parallel, with 2 address 2 outputs each.
The board has the size of 40x73mm and is thus suitable for installation in a Strapubox housing.
Scope of delivery:
1x PCB Equipped with all SMD components and DIP switches
Connector depending on version
Notice:
The currently sold-out models will be available again in the 2nd half of 2020, as the drivers are undergoing a redesign and will then be available in a new variant.
Technical data:
Dimensions: 40 x 73mm
Voltage: 7 - 30V max.
Setting DMX start address and number of addresses 1-4
Current: 310mA
Datasheet MY9942-IC
Product number:
LED521PT31m
Variants from €23.90*
Micro DMX LED driver V2 - 7-28V - 4x2A - only 22x67mm
€14.60*
Based on the MY-Semi-IC MY9942 an extremely small DMX receiver (22 x 67mm) with MOSFETs as output drivers for constant voltage was developed. This board has all known advantages of the MY9942 breakout board. So the DMX address can be set by DIP switch or by solder jumper the number of used DMX channels (1-4 channels).
Beside LED strips all LED types can be connected, which are operated with constant voltage in the range of 7 - 28V. Solder pads are provided for all connections (DMX signal, voltage, LED output). If you are interested in getting the board without DIP switches, please ask us directly. The DMX address can then be fixed via solder jumpers. This leads to a board with only a few millimeters height.
More information can be found in an article on the blog.
> Web-Calculator for setting the DMX start adress via DIP switch
Scope of delivery:
1x circuit board equipped with all SMD components and DIP switches
Technical data:
Dimensions: 22 x 67mm
Voltage: 7 - 28V (30V max.)
Current: 2A per channel, 8A totalPWM frequency: 2.000Hz
Data sheet MY9942-IC
Product number:
LED521i2
Artnet-DMX-Decoder for 16 DMX universes
€650.00*
ArtNet to DMX decoder for a total of 16 DMX universes (max. 8192 DMX channels) in 19" rack housing (1U).
Robust construction. PushDial and OLED display for setting IP addressing, port assignment and for test functions.Perfect synchronization between the individual universes, e.g. for pixel mapping and voxel mapping. The Artnet controller is ready for use within seconds after commissioning. One HTP merge is automatically available for two Art-Net sources. If required, you can access and change specific device settings via the integrated web configuration tool.
Technical data:
Item no.
LK132
Input ports
1 x Ethernet IN (RJ45)
Output ports
16 x DMX OUT (RJ45), 1 x Ethernet THRU
Voltage input
230VAC (AC cable included)
Dimensions
19" rack housing (1U)
Weight
1.5kg
Product number:
LK132
Artnet-DMX-Decoder for 8 DMX universes
€450.00*
ArtNet to DMX decoder for a total of 8 DMX universes (max. 4096 DMX channels) in 19" rack housing (1U).
Robust construction. PushDial and OLED display for setting IP addressing, port assignment and for test functions.Perfect synchronization between the individual universes, e.g. for pixel mapping and voxel mapping. The Artnet controller is ready for use within seconds after commissioning. One HTP merge is automatically available for two Art-Net sources. If required, you can access and change specific device settings via the integrated web configuration tool.
Technical data:
Item no.
LK131
Input ports
1 x Ethernet IN (RJ45)
Output ports
8 x DMX OUT (XLR 5pin), 1 x Ethernet THRU
Voltage input
230VAC (AC cable included)
Dimensions
19" rack housing (1U)
Weight
1.5kg
Product number:
LK131
Accessories for LED DMX driver:
In addition to LED DMX drivers, you will also find all the necessary accessories for a DMX-controlled LED installation in the LED-Studien Shop:
- high quality power supplies up to 600 Watt power
- LED strips and bars in different variations
- Digital pixel and matrix solutions