The LED chain consists of 30 RGB pixels in a black PVC housing with a white-opal hemisphere. The round 30mm pixels each have 3 RGB LEDs integrated with a WS2811 pixel IC and are operated at 12V. They can be controlled with all standard pixel controllers. The pixels are connected with a black ribbon cable (15cm pixel spacing each) in a chain of 30 pixels. Each chain must be supplied with voltage.
Scope of delivery:
1x LED pixel chain with 30 pixels with RGB LED and 30mm diameter.
Technical data:
The LED chain consists of 30 RGB pixels in a black PVC housing with a white-opal hemisphere. The round 30mm pixels are operated at 12V and each have 3 RGB LEDs with an integrated UCS512C3 pixel IC for direct DMX control. The pixels are connected with a black ribbon cable (15cm pixel spacing each) in a chain of 30 pixels. DMX addressing starts at 1 with the first pixel and is automatically incremented.
Scope of delivery:
1x DMX pixel chain 450cm long with 30 RGB pixels each
Technical data:
The individual pixels are equipped with a round 8mm RGB LED and encapsulated in a housing together with the WS2811 LED IC. This makes these pixels waterproof. The connection of the single pixels consists of 4-wire ribbon cable with a length of approx. 8cm. The packaging unit is usually 50 pieces (max. per connected chain). Please order the required number of single pixels.
Scope of delivery:
1x Chain single pixel with RGB LED 8mm with 50 pieces
Technical data:
Voltage: 5V DC
Power: 0.24W/pixel
LED: 8mm RGB
Mounting hole: 12mm
This board is DMX pixels for building LED matrix systems or chains for effects. The MY9943-IC from MySemi has an auto-addressing, starting at address 1. Via an upstream MY9942-IC also another start address can be defined. Per pixel 3 DMX channels are needed. Thus 170 pixels can be addressed per universe. The boards can be controlled directly with the DMX protocol.
On the board 3 RGB-PLCC6-LEDs "high-brightness" are installed. The pixels can be connected to each other with cables. A direct connection is possible with pin and baseboards with a grid of 2.54mm. We offer a corresponding set with connectors. This also includes a 2-pole PSK connector for the voltage. The voltage supply must be re-injected at least every 30 pixels.
Scope of delivery:
1x board DMX pixel board without connectors
Technical data:
Size 40x40mm
connection pins RM 2,54mm for DMX-IN, DMX-Out
3x PLCC6-LED RGB high brightness
operation with 12V, 70mA max.
suitable for connector pins in 2,54mm grid, e.g. PSK
The pixel board is used to build RGB pixel arrays in any shape. The WS2812 pixels allow a very small structure. The board has a diameter of only 14mm.
No matter if linear, in matrix order or individually e.g. as letters. The operation is with 5V and needs approx. 60mA per pixel in the maximum.
Scope of delivery:
10 x circuit board WS2812B
This board is a DMX breakout board with the MY9941 IC from MySemi. The IC has an auto-addressing, starting at address 1. All connected pixels are numbered automatically. The boards can be controlled directly with a DMX protocol.
Scope of delivery:
1x board DMX breakout board without connectors, with/without LEDs depending on variant.
Technical data:
Size 32x32mm
Connection pins for DMX-IN, DMX-Out, ext. LED
Variant with 3x PLCC6-LED RGB
operation with 12V
suitable for connector plugs in 2,54mm pitch, e.g. PSK
The pixel board is used to build up RGB pixel arrangements in any shape. The dimension of 50x50mm provides a flexible arrangement of the pixels. No matter if linear, in matrix order or individually e.g. as letters. This board offers many possibilities.
This new version of the pixel board is already equipped with tub connectors and comes with a ribbon cable for a pixel distance of 10cm or less. You only have to plug your matrix together.
The board is equipped with 3 PLCC6 LEDs and is powered with 12V. The conversion to 6 LEDs and 24V is possible. The board is available in white or black.
With this complete version all SMD components incl. 3 RGB LEDs are equipped. For operation, appropriate connectors must be connected.
Scope of delivery:
1x PCB equipped with all SMD components, tub connectors and 3x RGB LED1x ribbon cable with post plugs approx. 5cm long
Datasheet
The pixel board is used to build up RGB pixel arrangements in any shape. The dimension of 50x50mm provides a flexible arrangement of the pixels. No matter if linear, in matrix order or individually e.g. as letters. This board offers many possibilities.
This new version of the pixel board is already equipped with tub connectors and comes with a ribbon cable for a pixel distance of 10cm or less. You only have to plug your matrix together.
The board is equipped with 6 PLCC6 LEDs and is powered with 24V. The board is available in black.
With this complete version all SMD components incl. 6 RGB LEDs are assembled. For operation, appropriate connectors must be connected.
Scope of delivery:
1x PCB black, equipped with all SMD components, tub connectors and 6x RGB LED1x ribbon cable with post plugs approx. 5cm long
Datasheet
The pixel board is used to build up RGB pixel arrangements in any shape. The dimension of 50x50mm provides a flexible arrangement of the pixels. No matter if linear, in matrix order or individually e.g. as letters. This board offers many possibilities.
The board is equipped with 3 PLCC6-LEDs and is operated with 12V. The conversion to 6 LEDs and 24V is possible. The board is available in white or black.
With this complete version all SMD components incl. 3 RGB LEDs are equipped. For operation, connections must still be made by cable.
Scope of delivery:
1x PCB equipped with all SMD components, tub connectors and 3x RGB LED1x ribbon cable with post plugs approx. 5cm long
Datasheet
The pixel board is used to build up RGB pixel arrangements in any shape. The dimension of 50x50mm provides a flexible arrangement of the pixels. No matter if linear, in matrix order or individually e.g. as letters. This board offers many possibilities.
The board is equipped with 6 PLCC6-LEDs and is operated with 24V. The board is available in black.
With this complete version all SMD components incl. 6 RGB-LEDs are equipped. For operation the boards have to be connected with cables.
Scope of delivery:
1x PCB black, equipped with all SMD components and 6x RGB LED
Datasheet
