Customised assembly
High-quality technology
Engineering know-how

1-10V universal LED driver 4-channel | 4x4A

€52.50*

Available, delivery time: 3-5 days

Product number: LK79
Available stock: 12

This 1-10V driver is designed for 4-channel LED applications, e.g. for controlling RGB or RGBW LED strips, but also for CCT or 4 pure white LED strips to be controlled separately. There are 4 outputs on the receiver. Each output can be loaded with 4A, which makes even very large installations feasible.

The universal LED driver works with all common 0-10V and 1-10V drivers. So at the input can be connected passive 1-10V potentiometers for control (control voltage comes from the driver) as well as 0-10V industrial controllers, where the control voltage comes from the controller.



Scope of delivery:

1x Receiver LK79



Technical data:

Channels: 4
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port
Connection: input (V+/ground; 4 x 1-10V) output (4 x LED channel, V+)
IP class: IP 20
Dimensions: LxWxH 179x46x19mm

Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. 

Repeater

LED Repeater / Amplifier | 4 x 6A
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each.   Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater.  Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.  Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51

€35.00*