Customised assembly
High-quality technology
Engineering know-how

Power supply HLG 24V - 25A - 600 Watt, extremely quiet

€199.00*

Available, delivery time: 3-5 days

Product number: LED1155
Available stock: 2

Switching power supply Meanwell HLG-600-24, 24 Volt, 25 Ampere, 600W - without fan!

  • overload protection by current limiting, auto recovery, protected against short circuit, overload, overvoltage
  • built-in PFC circuit
  • for indoor and outdoor use (IP65)
  • adjustable output voltage
  • adjustable current limitation



Note for connection of LED drivers

If the driver has 2 parallel inputs (++--) please use both parallel voltage outputs of the power supply and connect them to the parallel inputs of the driver.



Technical data:

 Model HLG-600-24
 Voltage 24V
 Maximum power 600W
 Current 25A
 Adjustable voltage range 12 ~ 24V
 Overcurrent protection 95...108%
 Inrush current, max. 70A
 Voltage input 90...264V AC (47...63Hz), 127...370V DC
 Power factor 0,93
 Working temperature -40...+70°C
 Dimensions 280x144x48.5mm (LxWxH)
 Weight 3,900g

 

Properties "Power supply HLG 24V - 25A - 600 Watt, extremely quiet"
IP protection: IP65
Power: 600 Watt
Power supply type: HLG
Voltage: 24V
Data according to manufacturer. Errors and changes reserved.

Recommended accessories

WAGO terminal 221 2 cored
WAGO's new COMPACT connection terminal 221 is suitable for all types of conductors. The operating levers move smoothly, yet you have a wide range for the cross-section and a secure connection.   Technical data: Total number of potentials  1  Color  transparent  Design data according to 1  EN 60664  Rated voltage EN (1) [V]  450  Rated surge voltage (1) [kV]  4  Rated current (1) [A]  32  Connection technology (1)  CAGE CLAMP®  Ladder type 1  solid + stranded  Cross section from   0.2 mm² / 24AWG Cross section until   4 mm² / 12 AWG Ladder type 2  finely stranded  Cross section from 0.14 mm² / 24 AWG Cross section until  4 mm² /12 AWG Stripping length from   11 mm  Wiring type   Side wiring  Flammability class according to UL 94  V2  Weight [g]  2,5  Width 2/3/5 pole 13.1/18.7/29.9 mm  Height  8.3 mm  Depth  18.6 mm   
Product number: W221mas

€0.49*
WAGO D2411 holders
Compact holders for the narrow D2411 feed-through connectors from WAGO. In each case, 3 or 5 terminals fit next to each other, thus enabling clean installation, e.g., in the control cabinet or in a light cove.   
Product number: D2411-Halterungen

€1.20*
Schuko connection cable, 3-wire, 150cm, white
For all larger power supplies with protective contact leads, such as the entire Meanwell HLG series. Straight grounding plug (CEE 7/4) and open end with wire end ferrules. Notice: The connection of 230V supply lines must never be carried out under current and must be carried out by a qualified electrician. There is a danger to life here!
Product number: K12w

€4.90*
Schuko connection cable, 3-wire, 150cm, black
For all larger power supplies with protective contact leads, such as the entire Meanwell HLG series. Straight grounding plug (CEE 7/4) and open end with wire end ferrules. Notice: The connection of 230V supply lines must never be carried out under current and must be carried out by a qualified electrician. There is a danger to life here!
Product number: K12

€5.30*
WAGO IP68 gel box
Waterproof gel box for WAGO terminals. Simple, fast and safe handling  Immediately ready for use and accessible again  Silicone-free  Label-free  Can be stored indefinitely  Complete system consisting of gel boxes and WAGO terminal blocks is VDE-tested and IPX8-certified Dimensions: W 46 x H 18 x D 34mm, width inside 35mmSuitable for: 2 x W221-2 or 1 x W221-5
Product number: W221-gel

€9.90*
Inrush current limiter
Inrush current limiter Meanwell ICL-16R up to 16A with integrated bypass relay (no simple NTC).Peak current limiting for inductive and capacitive loads180 - 264 VAC / 16 A permanent  internal thermal fuse  integrated bypass relay  capacitive loads up to 2500µF  for DIN rail mounting Technical data:  Model ICL-16R  Input voltage 180-264VAC  Frequency range 47-63Hz  AC rated current, permanent 16A  Working temperature -30...+70°C  Dimensions 90x35x55mm (LxWxH)  Weight 116g
Product number: ICL_mas2

€42.50*