RGB+WW (3000K) for accent lighting: High density 120 + 120 LEDs/m

a g

LK04-6r

product-datasheet

€85.00*

Content: 5 Meter (€17.00* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Colour temperature

3.000K warm

4.000K neutral

6.500K kalt

Rolle

Product number: LK04-6r

Available stock: 59

RGB LED + warm white LED alternately
120 RGB-LED/m + 120 WW-LED/m
Brightness: 650lm/m for white + 750lm/m RGB
Color rendering for white: CRI>90
Voltage: 24V
Power: 24 Watt/m

Price for 1 roll = 5 meters - Buy by the meter -

A high density RGB+WW LED strip with 120 RGB + 120 white LEDs. Thanks to this high LED density, the LED strip can be used in many aluminum profiles without the LED dots becoming visible. A profile depth of 10 mm is sufficient.

The LK04-6r combines high power RGB LEDs (type 2835) with high quality warm white LEDs (type 2216) in 3,000K and very good color quality of CRI90+. In smaller or narrow rooms (e.g. corridors) the LK04-6r can also be used for basic room lighting. For larger rooms and higher brightness requirements we offer the LK04-6o.

Color temperature adjustment by means of RGBW LED strips

The white LEDs on the ribbon have a color temperature of approx. 3,000K warm white. At full brightness of the white LEDs, a color temperature range of 2,500K - 6,000K (daylight white) can be set by mixing in the color LEDs. By slightly dimming the white LEDs, even 2,200 is possible.

Available variants

5m-Roll IP20 without water protection, incl. 10cm connection cable

All variants have a 3M adhesive tape on the back for mounting, are divisible every 5cm.

Notes on accessories:

To operate 5m (1 roll) of LED strips, incl. safety a 24V power supply with min. 140 Watt is required.

For a color control of the 5m in 24V version an RGBW driver (4-channel) with min. 4 x 1.4A is needed.

You will find answers to frequently asked questions in our FAQ.

Properties "RGB+WW (3000K) for accent lighting: High density 120 + 120 LEDs/m"

Brightness lm/m:	600
Colour rendering:	CRI>90
Energy efficiency class (EEK):	G
Length/VPE:	5m - IP20
Power:	25
Seperatable every (cm):	5,0 cm
Strip width in mm:	12
Voltage:	24V
Water protection:	IP20 without waterprotection
LED/m:	120

Data according to manufacturer. Errors and changes reserved.

Power supply

Power supply HLG 24V - 7.8A - 185 Watt, extremely quiet

Switching power supply Meanwell HLG-185-24, 24 Volt, 7.8 Ampere, 185W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data: Model HLG-185-24 Voltage 24V Maximum power 185W Current 7.8A Adjustable voltage range 22 ~ 27V Overcurrent protection 95...108% Inrush current, max. 65A Voltage input 90...264V AC (47...63Hz), 127...370V DC Power factor 0,95 Working temperature -40...+70°C Dimensions 2228x68x38.8mm (LxWxH) Weight 1,150g

Product number: LED1125

€66.00*

Details

Recommended driver

LK55 Universal Controller 12-36V for LED Strips, Panels etc.

Product number: LK55mas

€59.00*

Details

Control via app with the WLAN variant of the LK55 | 4 x 6A

The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose. Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss. If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel). Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8

Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones

Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All RGB(W) remote controls can operate all RGB(W) drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data: Item no. LK55FB3 Power supply 3 x 1,5V AAA batteries Dimensions (LxWxH) 120x55x17mm Operation:

Product number: LK55FB3

€49.00*

RGBW touch wall control | 1 zone | white

Select variant: 1 Zone | Color: white

Touch control for RGBW driver of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zone Wall remote control with touch field (4 memory keys) 4 Zone Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data: Item no. LK55w4bw Power supply 110-240VAC Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:

Product number: LK55w4bw

€52.50*