Sold by meter: LED-Strip LK04-6q
Sale by the meter. Specify how many meters you need.
The specified quantity is always delivered as 1 tape , so e.g. quantity 7 is one tape with 7m length and not 7 tapes with 1m each. A maximum of 30m is possible on a single roll.
Meter goods are delivered without connection cable as standard. On request, you can order suitable, already soldered connection cables in the desired length.
In case of very long sections (>5m) you may have to consider the issue of voltage drop when wiring!
Ordering several assemblies
If you want to order several lengths, simply put them one after the other into the shopping cart. So e.g. first 7m with connection cable and then 3m with connection cable. The shopping cart will then display the lengths individually with the selected connection cable.
Specify how many meters you need:
Do you want us to solder cables already? Then please describe us in checkout which LED tape lengths with which cables you need exactly.
- LED type: 5050 - RGBW (4in1) - 60 LED/m
- With constant current sources (KSQ) for longer installations without a drop in brightness
- Brightness: 1.050lm/m total (450lm/m for white)
- Voltage: 24V
- Power: 17,6 Watt/m
- Width: 12mm
Sold by meter
The newest form of RGBWW LED strips consists of 4 in 1 LEDs. Thereby all 4 colors are integrated in one LED housing. This means that you no longer have alternating white and RGB LEDs on the flex strip and thus a harmonious light distribution even at short distances. An ideal solution e.g. for effect lighting applications in confined areas!
The special feature of this variant is the built-in constant current sources (KSQ). These counteract the voltage and brightness drop that is otherwise typical of LED strips over longer lengths (over 5 metres). The KSQ compensate for the voltage drop and thus always supply the LEDs with the correct current. Even with a single-sided power supply, LED installations up to 10m lenght can be realised without a visible drop in brightness.
Available versions
- 5m roll IP20 water protection with silicone coating, incl. 10cm connection cable
- by the meter in 1 - 30m length
All variants have a 3M adhesive tape on the back for mounting and can be divided every 10cm.
Notes on accessories:
To operate 5m (1 roll) of LED strips, a 24V power supply with min. 100 Watt is required. 5m x 17.6W/m + 10% safety = 97 Watt.
For a color control of the 5m a RGBW controller (4 channel) with min. 4 x 1 Amp is needed. 97W / 24V / 4 = 1 Ampere.
Answers to frequently asked questions can be found in our FAQ.
| Brightness lm/m: | 1000 |
|---|---|
| Energy efficiency class (EEK): | G |
| Power: | 18 |
| Seperatable every (cm): | 10 cm |
| Strip width in mm: | 12 |
| Voltage: | 24V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 60 |