Customised assembly
High-quality technology
Engineering know-how

Accent applications: LED Strip 2016 -120 LED/m - 900 lm/m - 2.200K warm white - IP20 5m roll

€49.00*

Content: 5 Meter (€9.80* / 1 Meter)

Available, delivery time: 3-5 days

Colour temperature
Water protection
Rolle
Product number: LK04-26b-22
Available stock: 35

  • LED type: 2016 - 120 LED/m
  • Brightness: 900 lm/m
  • Color rendering: High CRI>90
  • Voltage: 24 Volt
  • Power: 9,6 Watt/m
  • with constant current sources (KSQ)
  • Width: 10mm (12mm for IP67)

Price for 1 roll = 5 metersbuy by the meter -

 


 

LED strip with high color rendering quality (CRI>90) and good price-performance ratio. With a brightness of approx. 900 lm/m at a power consumption of only 9.6W/m, it is ideal for accent or effect applications. In smaller rooms (up to approx. 20m²), indirect room lighting can usually be realized. Thereby, due to the 6 color temperatures, a suitable alternative is available for every application scenario.

The built-in constant current sources (KSQ) ensure a uniform brightness of the LEDs even over longer lengths (>5m with one-sided feed).

 



Available variants

  • 5m roll IP20 without water protection, incl. 10cm connection cable
  • 5m roll IP67 water protection in silicone hose, incl. 10cm connection cable

Furthermore, the LED tape is sold by the meter IP20 in 1 - 30m length.

All variants have a 3M adhesive tape on the back for mounting, are divisible every 5 cm and are available in various color temperatures (e.g. 3,000K warm white).
 

 

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.

For brightness control of 5mdriver with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere.

Answers to frequently asked questions can be found in our FAQ.

 


 

Properties "Accent applications: LED Strip 2016 -120 LED/m - 900 lm/m - 2.200K warm white - IP20 5m roll"
Brightness lm/m: 900
Colour rendering: CRI>90
Colour temperature: 2.200K warm
Energy efficiency class (EEK): F
Power: 10
Seperatable every (cm): 5,0 cm
Strip width in mm: 10
Voltage: 24V
Water protection: IP20 without waterprotection
LED/m: 120
Data according to manufacturer. Errors and changes reserved.
datasheet

Power Supply

Power supply HLG 24V - 2.5A - 60 Watt, extremely quiet
Switching power supply Meanwell HLG-60-24, 24 Volt, 2.5 Ampere, 60W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data:  Model HLG-60-24  Voltage 24V  Maximum power 60W  Current 2.5A  Adjustable voltage range 22 ~ 27V  Overcurrent protection 95...108%  Inrush current, max. 55A  Voltage input 90...264V AC (47...63Hz), 127...370V DC  Power factor 0,95  Working temperature -40...+80°C  Dimensions 171x61.5x36.8mm (LxWxH)  Weight 730g  
Product number: LED1166

€44.00*

Recommended Drivers

Radio dimmer LK55-2 | 1 x 8A
The 1 x 8 amp driver offers only one output and is therefore only suitable as a dimmer. Due to the 8 amps, however, very powerful LED components can be connected. At 24 volts, for example, LED components up to 170 watts are possible. The driver is installed between the power supply and the LED component. It is ideally suited for small and medium installations, as well as a supplement for larger installations. The driver belongs to the LK55 series and can be combined with all dimmer remote controls available there.    NOTES: All drivers of our LK55 series remember the last setting even in case of power loss. RGBW and CCT color temperature remote controllers have no function on the LK55-2 LED dimmer.   Technical data: Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 1 x 8A Min. dim level: <1% (for RGB/W <3%)Connection: input: V+/ground, push button; output: V+/groundIP class: IP 20 Dimensions: LxWxH 95x37x20mm   Operation via pushbutton input The LK55-2 offers 2 green screw terminals on the back for a button input. For example, a simple pushbutton can be connected to this and thus control the light without radio. Short keystroke switches the LEDs on and off. Long keystroke dims the LEDs up and down. Instead of a pushbutton, in principle only 2 cables can be connected, which are then held together short or long. Video tutorial for dimming via radio Video tutorial for dimming via cable with PUSH DIM
Product number: LK55-2

€36.00*

Suitable Radio Control for Drivers

Handheld remote control touch wheel | 4 zones
Brightness control up to 4 light zones operateable Touch wheel for adjusting the brightness 1 Channel 3 memory keys for individual settings All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. NOTICE:  The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls.   Technical data:  Item no. LK55FB1  Power supply 3 x 1,5V AAA batteries  Dimensions (LxWxH) 120x55x17mm   Operation:   This video explains the functions of the LK55FB1:  
Product number: LK55FB1

€49.00*
Remote control with button | 1 zone | wall mounting
Select variant: Button
Pushbutton/dimmer for wall mounting or, thanks to the ultra-flat design, directly for gluing or screwing onto the wall. for universal driver of the LK55 series Operateable zones: 1 Power supply: 3V CR2430 battery Use in a standard switch series Since the stylus uses the standardized 55mm dimension (55x55mm), another frame can also be used. The central pushbutton can be removed and inserted into the frame of a known switch series, e.g. JUNG AS 500, MERTEN M, GIRA System 55 or GIRA E2. All major manufacturers have switch series in their program that fit the 55 standard dimension. LK55 series All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 30m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. NOTICE:  The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls.   Technical data:  Item no. LK55K1w  Power supply 3V CR2430 batteries  Dimensions (BxWxD) 86x86, Installation depth: 13mm   Installation:  
Product number: LK55K1w

€39.00*
Remote control with rotary knob | wall mounting
Color: white
for 1-channel receivers of the LK55 series Controllable zones: 1 Battery operation: 3V DC, CR2025 All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 30m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Power supply: Note that some models are powered by a battery (coin cell) that must be replaced every 1-2 years. This applies to all pushbutton and potentiometer models. All models with touch field can be supplied via the 230V house network, so that no battery change is required.   Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. NOTICE:  The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls. Technical data:  Item no. LK55W  Power supply 110-240VAC  Dimensions (BxWxD) 86x86x12mm, Installation depth: 20mm  
Product number: LK55Ww

€34.00*

Suitable Accessories for IP67

Silicone end cap: 12mm
Suitable silicone can be ordered separately.
Product number: SAK12

€0.30*
Silicone (acetate-free!) - 5ml
With this silicone you can seal neonflex- or normal LED-stripes in a silicone tube (IP67/68) with the corresponding end-caps watertight. This is especially usefull if a roll has to be devided into several parts. The silicone is acetate-free, thus no acetic acid is produced while curing, which would damage the electrical components.A tube with 5ml is enough to seal approx. 2-5 end-caps (depending on the size of the end-caps).
Product number: SIL01

€2.50*
mounting clamp for 12mm silicone
Montageklammer A12 Metall -12,2mm Breite - geeignet für Silikonschlauch
Product number: AL-KLH06

€0.95*
Waterprotected cable set: 2-pin
Das Set erlaubt es in Verbindung mit Silikondichtmasse und Endkappen wasserdichte Anschlüsse für weiße LED-Streifen herzustellen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Stücke geteilt werden soll.
Product number: LK04-23d-Con2

€2.50*