LED tape digital SK6812 - neutral white 4.000K - 60 pixel/m

€60.00*

Content: 4 (€15.00* / 1 Meter)

Available, delivery time 3-5 days

Colour temperature
Product number: LK107
Available stock: 16

These digital flex bands have the possibility to control each LED as a pixel individually. A special driver is responsible for this. The animation can be created comfortably by software. This results in a wide range of possibilities. The digital strips are the easiest way to create an LED matrix.

LED strips with SK6812 LEDs have the driver IC already integrated in the LED and are therefore very inexpensive. The pixel density of this variant is 60 LEDs/m. They are operated with 5V.

  • LED strip equipped with 60 digital LEDs per meter, corresponding to 60 individual pixels
  • available color temperatures: warm white 3.000K | neutral white 4.000K
  • can be used in many ways indoors without silicone coating
  • can be shortened after each LED
  • identical control to the known WS2812 LEDs
  • voltage feed at least every 2m
  • width approx. 10mm

Delivery unit: one roll 4m



Technical data:

Item no. LK106
Item LED flex tape digital SK6812, 4m roll, 60 pixel/m
LED type 5050
Color temperature 4,000-4,500K neutral white
CRI >80
LEDs/m 60
Pixel/m 60
Width 10mm
divisible every 1.7cm
Voltage 3.5-5.5V
Current/m 2.9A
Power consumption 14.4W/m
PWM frequency 1.200Hz

 

Properties "LED tape digital SK6812 - neutral white 4.000K - 60 pixel/m"
IP protection: IP20
Pixel/m: 60
Seperatable every (cm): 1,7 cm
Strip width in mm: 10
Typ: SK6812
Voltage: 5V
LED/m: 60
Data according to manufacturer. Errors and changes reserved.
datasheet

Recommended accessories

range extender for digital LED installations - allows up to 50m cable lenght!
Beim Anschluss und bei der Verlängerung digitaler LED-Streifen sind gewöhnlich keine lange Kabelwege realisierbar (max. 2m). Das hochfrequente Steuersignal für die LED-Pixel wird schnell verfälscht und es kommt zu Fehlern in der LED-Animation.  Der Range-Extender erhöht die Kabellänge für sichere Übertragung bei Digitalen LEDs auf über 50 Meter.  Es wird je ein Sender und ein Empfänger benötigt. Der Empfänger wird am LED-Streifen am Eingang angeschlossen, der Sender am Controller-Ausgang. Die Funktion Sener/Empfänger wird über eine kleine Lötbrücke festgelegt.   Technischer Hintergrund: Das Steuersignal bei digitalen LEDs ist relativ leistungsschwach, aber hochfrequent. Es müssen ja sehr viele Daten in kurzer Zeit übertragen werden. Für kleinen Installationen mit kurzen Kabelwegen ist das auch kein Problem, aber bei längeren Kabelwegen (>2m) kommt es schnell zu Störungen. Funkwellen, andere Geräte in der Nähe, Stromkabel usw. wirken auf das Steuerkabel ein und verfälschen das Signal. Der Range Extender behebt dieses Problem, in dem er eine symmetrische Signalübertragung realisiert (ähnlich wie bei DMX-Signalen). Das sonst auf nur einer Steuerleitung übertragene Datensignal, wird hier auf 2 Steuerleitungen aufgeteilt. Eine Leitung überträgt das normale Signal, die andere das Signal invertiert. Die relevante Information steckt damit jetzt in den Abständen beider Steuersignale (normal und invertiert) zueinander. Störungen von außen wirken immer gleichermaßen auf beide Steuerleitungen ein. Damit werden zwar nach wie vor beide Signale verfälscht, aber der Abstand beider Signale zueinander bleibt von der Störung unberührt. Am Ende der Datenleitung wird das symmetrische Signal wieder in ein normales LED-Steuersignal konvertiert. Es sind daher immer 2 Range Extender - einer am Anfang und einer am Ende des langen Kabelweges notwendig.
Product number: LK118-5

€4.60*
range extender 12V for digital LED installations - allows up to 50m cable lenght!
Beim Anschluss und bei der Verlängerung digitaler LED-Streifen sind gewöhnlich keine lange Kabelwege realisierbar (max. 2m). Das hochfrequente Steuersignal für die LED-Pixel wird schnell verfälscht und es kommt zu Fehlern in der LED-Animation.  Der Range-Extender erhöht die Kabellänge für sichere Übertragung bei Digitalen LEDs auf über 50 Meter.  Es wird je ein Sender und ein Empfänger benötigt. ACHTUNG: Der 12V-Range-Extender darf nur als Empfänger eingesetzt werden. Als Sender muss hier ein 5V-Range Extender eingesetzt werden, auch wenn 12V LED-Bänder verwendet werden. Der 12V-Empfänger wird am LED-Streifen am Eingang angeschlossen, der 5V-Sender am Controller-Ausgang.    Technischer Hintergrund: Das Steuersignal bei digitalen LEDs ist relativ leistungsschwach, aber hochfrequent. Es müssen ja sehr viele Daten in kurzer Zeit übertragen werden. Für kleinen Installationen mit kurzen Kabelwegen ist das auch kein Problem, aber bei längeren Kabelwegen (>2m) kommt es schnell zu Störungen. Funkwellen, andere Geräte in der Nähe, Stromkabel usw. wirken auf das Steuerkabel ein und verfälschen das Signal. Der Range Extender behebt dieses Problem, in dem er eine symmetrische Signalübertragung realisiert (ähnlich wie bei DMX-Signalen). Das sonst auf nur einer Steuerleitung übertragene Datensignal, wird hier auf 2 Steuerleitungen aufgeteilt. Eine Leitung überträgt das normale Signal, die andere das Signal invertiert. Die relevante Information steckt damit jetzt in den Abständen beider Steuersignale (normal und invertiert) zueinander. Störungen von außen wirken immer gleichermaßen auf beide Steuerleitungen ein. Damit werden zwar nach wie vor beide Signale verfälscht, aber der Abstand beider Signale zueinander bleibt von der Störung unberührt. Am Ende der Datenleitung wird das symmetrische Signal wieder in ein normales LED-Steuersignal konvertiert. Es sind daher immer 2 Range Extender - einer am Anfang und einer am Ende des langen Kabelweges notwendig.
Product number: LK118-12

€5.50*

Recommended driver

Artnet LED Pixel driver for up to 5,440 pixels
The drivers for digital LED strips are specially designed to control as many RGB pixels as possible individually. With the LK63, up to 5,440 pixels are possible, divided into 16 channels (340 RGB pixels each). This corresponds to a total of 32 DMX universes, which are transmitted via LAN/ArtNet. The 16 outputs can be loaded with max. 3 amps per channel. The driver can be controlled via ArtNet and offers 2 additional DMX ports with 512 channels on the output side. For configuration, the driver has an integrated web interface. Technical data: Item no. LK63 Output spots 16 x 3 Ampere (Multi SPI) Controllable pixels 16 x 340 = 5,440 Controllable ICs 2811 / 2801 / 6803 / 3001 / 8806 / 9813 / SK6812 Series Voltage input  5 - 24VDC DMX outputs 2 x 512 Channels Dimensions L258×W145×H41(mm) Weight 1,100g
Product number: LK63

€400.00*
SP108E LED Pixel Controller with App control
The SP108 can drive up to 2,048 pixels and many different pixel types: WS2801, WS2811, WS2812, SK6812, APA102 and many more. The suitable app "LED Shop" is available for free for IOS and Android and offers 180 different chase effects as well as precisely adjustable single colors. Speed and brightness can be changed at any time. A handy feature is that you can choose your favorites from the 180 effects and then quickly select them. Setting up the driver is quite intuitive and done in a few minutes. The driver works in the 2.4 GHz WLAN and can be accessed directly via the smartphone as well as integrated into the home WLAN. Screenshots of the App: The scope of delivery includes: 1 x LED driver SP108E 1 x 3-pin connection cable for LED strips 1 x mini screwdriver Supported LED types: WS2801, WS2811, WS2812 SK6812, SK6812_RGBW, SK9822 APA102, APA105 TM1804, TM1814, TM1913, TM1914, TX1812, TX1813 LPD6803, LPD8806  P9813, P943S, P9411, P9412, P9413, P9414 GS8206, GS8208 SM16703, UCS1903, INK1003, DMX512 FAQ: Does the driver require an existing WLAN? No, the driver can also be controlled directly with the smartphone (AP mode) and offers its own WLAN access point ("SP108E_xxx") for this purpose. If a WLAN is available, the driver can alternatively be integrated into it (STA mode), so that the WLAN does not always have to be changed to operate the driver. Can multiple drivers be used simultaneously in the app? Yes, the app can manage multiple drivers at the same time. You can switch between the drivers and change the settings for each. In addition, the individual drivers can be switched on and off directly. However, there is no direct synchronization and each driver must be set accordingly for itself.  Does the app have to be active for the animations to run? No. The app is only needed for the setup. You can close the app afterwards and also turn off the smartphone, for example. The SP108 will continue to play effects. Does the driver keep its settings when it no longer receives power? Yes, the driver can simply be disconnected from the mains. When power is applied again, it will start with the previously set animation. All settings will be kept. How can the white LEDs be used, e.g. with a SK6812_RGBW? The app has a separate control for white LEDs (e.g. for SK6812_RGBW pixel strips). This can be used to set the proportion of white LEDs and then, in the case of effects, the white LEDs are taken into account accordingly, so that the colors are generally desaturated. In the effects section of the app, the SOLID setting can then also be used to activate a permanently white, high-quality light, e.g. for lighting tasks, if required. Can the SP108 also control LED matrices? A number of pixels and a number of segments can be set in the setup. For example, for an 8 x 8 matrix then 8 pixels and 8 segments. This is taken into account in the effects, but in most matrices the pixels are connected in a snake shape as a long line and this is unfortunately not taken into account by the SP108. Therefore the effects are not displayed as desired on the matrix, but every 2nd row of the matrix shows the effect quasi upside down. We hope for a technical improvement here soon. Technical data: Input: 5-24V DC, GND Output: VCC, GND, Data, Clock current consumption: approx. 90mA up to 2.048 pixels depending on IC type ambient temperature: -20°C - +60°C dimensions: 80x41x20mm Weight: 40g
Product number: LK126

€29.00*

Suitable aluminum profiles

2m LED top profile PN4 wide (for 2 parallel LED strips)
Choose your required accessories for the aluminum profile. E.g. a suitable cover, as well as end caps and/or retaining clips for mounting. You can also reorder only accessories here (such as retaining clips) by clicking away the preselection in the profiles and covers. Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall Technical data: Width: 26.8 mm Height: 11,7 mm Width inside for LED strips: 24.1 mm 
Product number: AL29bund

€25.90*
2m LED-Micro-profile PL1
Choose your required accessories for the aluminum profile. E.g. a suitable cover, as well as end caps and/or retaining clips for mounting. You can also reorder only accessories here (such as retaining clips) by clicking away the preselection in the profiles and covers. Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall Technical data: Width: 16.8 mm Height: 6 mm Width inside for LED strips: 12.4 mm 
Product number: AL21bund

€9.00*
2m LED-Top-profile PL2
Choose your required accessories for the aluminum profile. E.g. a suitable cover, as well as end caps and/or retaining clips for mounting. You can also reorder only accessories here (such as retaining clips) by clicking away the preselection in the profiles and covers. Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall Technical data: Width: 16.8 mm Height: 13.1 mm Width inside for LED strips: 12.4 mm 
Product number: AL24bund

€0.00*