RGB+WW for room lighting: Bright white 1,000 lm/m - CRI>95 - IP20 5m roll

€129.00*

Content: 5 (€25.80* / 1 Meter)

Available, delivery time 3-5 days

Length/VPE
Product number: LK04-6o
Available stock: 75

  • RGB LED + warm white LED alternately
  • 60 RGB-LED/m + 60 WW-LED/m
  • Brightness: 1.100lm/m for white + 650lm/m RGB
  • Color rendering for white: CRI>95
  • Voltage: 24V
  • Power: 28,8 Watt/m

Price for 1 roll = 5 metersBuy by the meter -



New development of LED Studien

The RGB+WW LED strip is optimized for lighting that requires a bright warm white with excellent color quality and additional RGB color effects

For this purpose, powerful RGB LEDs (type 5050) were combined with the highest quality warm white LEDs (type 5630) in 3,000K with an excellent color quality of CRI95+. A common application for the RGB+WW LED strip is the indirect lighting of entire rooms. At 1,100 lm/m, the warm white LEDs are bright enough to illuminate an entire room. No additional luminaires are needed for this.

Color temperature adjustment by means of RGBW LED strips

The white LEDs on the ribbon have a color temperature of approx. 3,000K warm white. At full brightness of the white LEDs, a color temperature range of 2,700K - 5,000K (daylight white) can be set by mixing in the color LEDs. By slightly dimming the white LEDs, even 2,500 - 6,000K is possible.


Available variants

  • 5m-Roll IP20 without water protection, incl. 10cm connection cable
  • 10m-Roll IP20 without water protection, incl. 10cm connection cable
  • 5m-Roll IP67 water protection in silicone hose, incl. 10cm connection cable

Furthermore, the LED tape is available as meter goods IP20 in 1 - 30m length.

All variants have a 3M adhesive tape on the back for mounting, are divisible every 10cm.
 


Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 150 Watt is required. 

For a color control of the 5m in 24V version an RGBW driver (4-channel) with min. 1 x 3A ampere for white and 3 x 1A for RGB is needed. 

You will find answers to frequently asked questions in our FAQ.


 

Properties "RGB+WW for room lighting: Bright white 1,000 lm/m - CRI>95 - IP20 5m roll"
Brightness lm/m: 1500
Colour rendering: CRI>95
Energy efficiency class (EEK): G
Length/VPE: 5m
Power: 30
Seperatable every (cm): 10 cm
Strip width in mm: 12
Voltage: 24V
Water protection: IP20 without waterprotection
LED/m: 60
Data according to manufacturer. Errors and changes reserved.
datasheet

Recommended driver

Control via app with the WLAN variant of the LK55 | 4 x 6A
The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose.  Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss.  If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel).   Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8
Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones
Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data:  Item no. LK55FB3  Power supply 3 x 1,5V AAA batteries  Dimensions (LxWxH) 120x55x17mm   Operation:  
Product number: LK55FB3

€49.00*
Wall controls for RGBW color control (LK55)
Touch control for RGBW controller of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zonen Wall remote control with touch field (4 memory keys) 4 Zonen Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data:  Item no. Lk55w4bw  Power supply 110-240VAC  Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:
Product number: LK55w4mas

€52.50*

Suitable accessories for IP67

Silicone: 10ml
Mit der Silikondichtmasse lassen sich Neonflex- oder LED-Streifen im Silikonschlauch (IP67/68) mit entsprechenden Endkappen wieder wasserdicht verschließen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Teilstücke aufgeteilt werden soll. Das Silikon ist acetatfrei wodurch beim Aushärten keine Essigsäure entsteht, welche die elektronischen Bauteile des LED-Bandes beschädigt. Eine Tube á 10ml reicht zum Versiegeln von ca. 4-6 Endkappen (je nach Größe der Endkappe).
Product number: SIL01

€2.50*
Silicone end cap: 14mm
Suitable silicone can be ordered separately.
Product number: SAK14

€0.30*