Novelty: COB LED-Strip - no LEDs visible - 1,300 lm/m - 3,000K warm white - IP20 5m roll
- LED type: COB - no single LEDs visible
- Beam angle: 120°
- Brightness: ca. 1,300 lm/m
- Color rendering: High CRI>90
- Voltage: 24 Volt
- Power: 14 Watt/m
- Width: 10mm (IP67: 12mm | IP67 end caps: 14mm)
- Height: 2mm (IP67: 4mm | IP67 end caps: 6mm)
Price for 1 roll = 5 meters
New type of LED tape where no individual LEDs are visible! A continuous bright, uniform light band is created.
This has advantages for various applications:
- Homogeneous line light, even in very flat aluminum profiles.
- Continuous, narrow accent or orientation light
- Absolutely uniform indirect lighting at very short distances
The COB LED-Strips are also very efficient - approx. 100 lumens / watt - and can be processed just as flexibly as normal LED strips. Short pitch distances (only 4.5cm) allow the adjustment to desired dimensions and due to the double-sided adhesive tape on the back, the COB LED-Strips are very easy to install.
The continuous light effect without visible individual LEDs in the COB LED-Strip is achieved by a new process. With white LEDs, the light has always been generated by a converting phosphor layer. Now, instead of applying a separate, tiny phosphor layer to each LED chip - as it is usually the case - COB LED-Strips cover the entire 5m strip in one piece with a continuous phosphor. The result is a uniformly homogeneous band of light, as in color, so in brightness.
All variants have a 15cm connection cable, 3M adhesive tape on the back for mounting and can be split every 4.5cm.
Available Variants
- 5m-roll IP20 without water protection, incl. 10cm connection cable
- 5m-roll IP67 water protection in silicone tube, incl. 10cm connection cable
- IP20 sold by the meter in 1 - 30m length
Notes on accessories:
To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.
For brightness control of 5m a controller with min. 3.2 Ampere is needed. 75W / 24V = 3.2 Ampere.
Frequently asked questions:
Can COB LED-Strips be used like normal LED Strips?
Yes. COB-LED-Strips can be laid, cut and connected just as flexibly as normal LED-Strips. The solder contacts for connecting cables are also exposed.
What is the height of the COB LED-Strips?
Only 1.5mm. COB LED-Strips are not significantly higher than normal LED strips and therefore fit, for example, in all standard aluminum profiles. The IP67 versions have the typical height of 4mm due to the surrounding silicone tube.
Does the phosphor coating reduce the lifetime of the LEDs?
No. COB technology has been used for many years in numerous high-power LED modules (up to 100 Watt output), where the temperature input into the phosphor coating is immensely high. There is no known reduction in lifetime here.
Are COB-LED-Stips water-protected, e.g. suitable for outdoor use?
For this purpose, choose the variants with IP67 water protection.
You can find more answers to frequently asked questions about LED strips in our FAQ.
| Beamangle (θ | FWHM): | 120° |
|---|---|
| Brightness lm/m: | 1300 |
| Color consistency: | SDCM < 3 |
| Color rendering: | CRI>90 |
| Color rendering CQS: | 95 |
| Color rendering TLCI: | 88 |
| Color rendering TM30-20 Rf: | 94 |
| Color rendering TM30-20 Rg: | 99 |
| Color temperature: | 3000K warm |
| Connecting cable: | 10 cm |
| Cutable every (cm): | 4,5 cm |
| Dimmable: | Yes, with PWM LED drivers |
| Energy efficiency class: | E |
| LED stripe hight: | 2 |
| LED stripe length: | 5m (max. 30m available) |
| LED stripe width (mm): | 8 |
| LED type / size: | COB |
| Lifetime: | 50.000h (L70/B10) |
| Mounting: | Integrated 3M adhesive tape |
| Nominal power: | 14 |
| Operating temperature: | -20°C to +40°C |
| PCB color: | white |
| Voltage: | 24V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 528, COB |
Power Supply
Recommended Drivers
Suitable Radio Control for Drivers
