Novelty: RGB COB LED strip without visible single LEDs - 24V

€120.00*

Content: 5 (€24.00* / 1 Meter)

Available, delivery time 3-5 days

Product number: LK04-3i
Available stock: 33

  • LED type: RGB-COB
  • Beam angle: approx. 120
  • Brightness total: approx. 600 lm/m
    Red: 120 lm/m
    Green: 390 lm/m
    Blue: 60 lm/m
  • Voltage: 24V
  • Power: 15 Watt/m
  • Width: 12mm

Price for 1 roll = 5 metersBuy by the meter -



Novel RGB LED strip where no individual LEDs are visible! Red, green and blue LEDs are arranged extremely densely and covered with a milky silicone. This creates a continuously bright, uniform band of light

This has advantages for various applications:

  • Homogeneous line light, even in very flat aluminum profiles.
  • Continuous, narrow accent or orientation light
  • Absolutely uniform indirect lighting at very short distances

 


Available versions

  • 5m roll IP20 without water protection, incl. 10cm connection cable

The LED tape is also available by the meter in IP20 in lengths of 1 - 30m.

All versions have a 3M adhesive tape on the back for mounting and are divisible every 5,5cm.



Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.

https://shop.led-studien.de/de/zubehor/netzteile/24v-netzteile

For brightness controll of 5m a controller with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere.

https://shop.led-studien.de/de/controller/dimmer-1-2-kanal

It is best to use the LED strip with a suitable aluminum profile or other solution for cooling. Due to the high power, the LEDs would lose brightness and lifetime very quickly without an aluminum profile. We recommend aluminum profiles with cover to protect the LEDs like our PL1.

Answers to frequently asked questions can be found in our FAQ.


 

Properties "Novelty: RGB COB LED strip without visible single LEDs - 24V"
Brightness lm/m: 600
Energy efficiency class (EEK): G
Power: 15
Seperatable every (cm): 5,5 cm
Strip width in mm: 12
Voltage: 24V
Water protection: IP20 without waterprotection
LED/m: COB
Data according to manufacturer. Errors and changes reserved.
datasheet

Power supply

Power supply HLG 24V - 5A - 120 Watt, extremely quiet
Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data:  Model HLG-120-24  Voltage 24V  Maximum power 120W  Current 5A  Adjustable voltage range 22 ~ 27V  Overcurrent protection 95...108%  Inrush current, max. 65A  Voltage input 90...264V AC (47...63Hz), 127...370V DC  Power factor 0,95  Working temperature -40...+70°C  Dimensions 2220x68x38.8mm (LxWxH)  Weight 1,120g  
Product number: LED1134

€64.00*

Recommended driver

Control via app with the WLAN variant of the LK55 | 4 x 6A
The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose.  Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss.  If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel).   Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8
Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones
Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data:  Item no. LK55FB3  Power supply 3 x 1,5V AAA batteries  Dimensions (LxWxH) 120x55x17mm   Operation:  
Product number: LK55FB3

€49.00*
Wall controls for RGBW color control (LK55)
Touch control for RGBW controller of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zonen Wall remote control with touch field (4 memory keys) 4 Zonen Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data:  Item no. Lk55w4bw  Power supply 110-240VAC  Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:
Product number: LK55w4mas

€52.50*