LED-Strip RGBWW, 24V, IP54, 12mm wide
- LED type: 5050 - RGBW (4in1) - 60 LED/m
- Waterproof with silicone coating IP54
- Brightness: 1.220lm/m total (500lm/m for white)
- Voltage: 24V
- Power: 19,2 Watt/m
- Width: 12mm
Price for one roll = 5m
The newest form of RGBWW LED strips consists of 4 in 1 LEDs. Thereby all 4 colors are integrated in one LED housing. This means that you no longer have alternating white and RGB LEDs on the flex strip and thus a harmonious light distribution even at short distances. An ideal solution e.g. for effect lighting applications in confined areas!
This version is waterproof with a silicone coating in IP54 and therefore the right choice for all outdoor applications or e.g. also in the bathroom. The advantage over other waterproof RGBW LED strips is the small width of only 12mm. However, the strip is not suitable for an underwater application. Here you need at least IP68.
- 5m roll IP54 water protection with silicone coating, incl. 10cm connection cable.
All variants have a 3M adhesive tape on the back for mounting and can be divided every 10cm.
Attention: Soldering new connection cables is extremely difficult with potted LED strips with IP54, because the silicone must first be completely removed from the soldering points. So if you are planning elaborate assemblies with sections of different lengths, you should prefer IP67 LED strips (with silicone tubing) to the potted IP54 variant.
Notes on accessories:
To operate 5m (1 roll) of LED strips, a 12 or 24V power supply with min. 110 Watt is required. 5m x 19.2W/m + 10% safety = 110 Watt.
For a color control of the 5m in 24V version a RGBW controller (4 channel) with min. 4 x 1,3 Amp is needed. 110W / 24V / 4 = 1,2 Ampere.
Answers to frequently asked questions can be found in our FAQ.
|Energy efficiency class (EEK):||G|
|Seperatable every (cm):||10 cm|
|Strip width in mm:||12|
|Water protection:||IP54 with silicone cover|
Suitable remote control for driver
Suitable accessories for IP67