Customised assembly
High-quality technology
Engineering know-how

DALI-LED driver 4-channel | 4x4A

€69.00*

Available, delivery time: 3-5 days

Product number: LK87
Available stock: 1

This DALI driver is designed for 4-channel LED applications and can therefore be used e.g. to control RGBW LED systems, but also for installations with adjustable color temperature (CCT) or to dim 4 independent zones with white LEDs.  Each of the 4 outputs can be loaded with 4A, which makes even very large installations feasible.

The LED driver works with all known DALI drivers



Scope of delivery:

1x Receiver LK87



Technical data:

Channels: 4
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port
Connection: Input (V+/ground, DALI in) Output (4xLED channel, V+, DALI out, Power out)
IP class: IP 20
Dimensions: LxWxH 179x46x19mm

Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. 

Recommended accessories

DALI bus power supply
Power supply for the DALI bus. Input voltage range: 100-240VAC Output: 16VDC, max. 250mA Installation:   Technical data: Dimensions:
Product number: LK109

€79.00*
DALI wall-mounted remote control | 4 zones
Remote control for wall mounting for use with the 4-channel DALI LED controller LK90 from our program. The individual zones can be switched on/off and dimmed via the buttons. Scope of delivery: 1x wall remote control DALI LK88 Technical data: Dimensions: LxWxH 86x86x41mm 
Product number: LK88mas

From €55.00*

Repeater

LED Repeater / Amplifier | 4 x 6A
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each.   Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater.  Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.  Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51

€35.00*