RGB+warmwhite (3000K) for accent lighting: High density 120 + 120 LEDs/m
slide 2 of 4
slide 1 to 4 of 4
g
a
g
LK04-6r
€85.00*
Content:
5 Meter
(€17.00* / 1 Meter)
Available, delivery time: 3-5 days
Product number:
LK04-6r-30
Available stock:
12
- RGB LED + white LED alternately
- 120 RGB-LED/m + 120 white LED/m
- Brightness: 650lm/m for white + 750lm/m RGB
- Color rendering for white: CRI>90
- Voltage: 24V
- Power: 24 Watt/m
Price for 1 roll = 5 meters
The LK04-6r combines high power RGB LEDs (type 2835) with high quality white LEDs (type 2216) in 3000, 4000 or 6500K and very good color quality of CRI90+. In smaller or narrow rooms (e.g. corridors) the LK04-6r can also be used for basic room lighting. For larger rooms and higher brightness requirements we offer the LK04-6o.
All variants have a 15cm connection cable, 3M adhesive tape on the back for mounting and can be split every 5cm.
More available variants
- 5m roll IP67 water protection in silicone hose, incl. 15cm connection cable
- IP20 sold by the meter in 1 - 30m length
Notes on accessories:
To operate 5m (1 roll) of LED strips, incl. safety a 24V power supply with min. 140 Watt is required.
For a color control of the 5m in 24V version an RGBW driver (4-channel) with min. 4 x 1.4A is needed.
You will find answers to frequently asked questions in our FAQ.
Properties "RGB+warmwhite (3000K) for accent lighting: High density 120 + 120 LEDs/m"
| Brightness lm/m: | 600 |
|---|---|
| Colour rendering: | CRI>90 |
| Energy efficiency class (EEK): | G |
| Length/VPE: | 5m - IP20 |
| Power: | 25 |
| Seperatable every (cm): | 5,0 cm |
| Strip width in mm: | 12 |
| Voltage: | 24V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 120 |
Data according to manufacturer. Errors and changes reserved.
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de
datasheet
Power supply
slide 1 of 1
Power supply HLG 24V - 7.8A - 185 Watt, extremely quiet
€66.00*
Switching power supply Meanwell HLG-185-24, 24 Volt, 7.8 Ampere, 185W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-185-24
Voltage
24V
Maximum power
185W
Current
7.8A
Adjustable voltage range
22 ~ 27V
Overcurrent protection
95...108%
Inrush current, max.
65A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
2228x68x38.8mm (LxWxH)
Weight
1,150g
Product number:
LED1125
Recommended driver
slide 1 to 2 of 2
Control via app with the WLAN variant of the LK55 | 4 x 6A
€79.00*
The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available:
EasyLighting App for Android / für IOS
RealColor App for Android / für IOS
In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example.
The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose.
Notes:
All drivers of our LK35/55 series remember the last setting even in case of power loss.
If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel).
Technical data:
Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20
Dimensions (L*W*H): 171x58x28mm
Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Instruction video for the installation of the LK35-8
Product number:
LK35-8
Suitable remote control for driver
slide 1 to 2 of 2
Remote control, with touch wheel & buttons | 4 zones
€49.00*
Control of color & brightness,
up to 4 light zones controllable
Touch wheel for color selection
Separate dim button for white LEDs
3 memory buttons for individual colors
All RGB(W) remote controls can operate all RGB(W) drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35.
It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver.
The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal.
Technical data:
Item no.
LK55FB3
Power supply
3 x 1,5V AAA batteries
Dimensions (LxWxH)
120x55x17mm
Operation:
Product number:
LK55FB3
RGBW touch wall control | 1 zone | white
€52.50*
Select variant:
1 Zone
|
Color:
white
Touch control for RGBW driver of the LK55 series
Controllable zones: 1
4 memory buttons for individual color scenes
Power supply: 110-240VAC
Color: white
Our RGBW wall remotes differ in some details:
1 Zone Wall remote control with touch field (4 memory keys)
4 Zone Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately)
All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35.
It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver.
The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal.
Combination with switch series of well-known manufacturers
The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions:
MERTEN M-Plan
GIRA E2 (flat installation)
JUNG Serie A Creation
KOPP HK i8
ROHDE+ROHDE
Check the exact dimensions directly with the manufacturers.
Technical data:
Item no.
LK55w4bw
Power supply
110-240VAC
Dimensions (WxHxD)
86x86x12mm, Installation depth: 20mm
Operation:
Product number:
LK55w4bw
Suitable cables
slide 1 to 2 of 2
RGBW flat ribbon cable 5x0,5mm²
€1.49*
This cable is a universal flat ribbon cable with 5 wires with 0.5mm² each in the colors black, white, green, blue, red.
Scope of delivery: RGBW cable - length according to your quantity specification
Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.
Technical data:
5 cores a 0,5mm²
Product number:
LK59r
RGBW-Cable 4x0,25mm² + 1x0,8mm² - black
€1.85*
This cable is optimal suitable for our 4in1 RGBW LED strips. All color line power (RGB and white) have a diameter of 0.25mm². For the common voltage supply (common plus) 0.8mm² are available.
Scope of delivery: RGBW cable - length according to your quantity specification
Note
It can be difficult to solder the common positive wire with 0.8mm² cross-section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:
1. after you have stripped the 0.8mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the wire is much easier to solder to the LED strip.
2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.5mm². Solder this to the LED strip and then connect it to the 0.8mm² positive wire of the RGBW cable. For the connection, you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp them and (before!) slide a heat shrink tube over them for insulation.
Technical data:
Max. Current load: 8A total, 2A per channel
Temperature range: -5° to +70°C
Outer diameter: 6mm
Product number:
l4s-025