Novelty: COB LED strips with adjustable color temperature (CCT): 24 volts - CRI>90
e
a
g
€120.00*
Content:
5 Meter
(€24.00* / 1 Meter)
Available, delivery time: 3-5 days
Product number:
LK04-9h
Available stock:
34
- LED type: COB
- warm white & cool white mixed
- 2,700 - 6,000 Kelvin
- Brightness: max. 850 + 950 lm/m*
- Colour rendering: High CRI>90
- Voltage: 24V
- Power: 19,2 Watt/m (real approx. 10W/m)
- Width: 12mm
Price for 1 roll = 5 meters
Innovative CCT LED strip where no individual LEDs are visible! A continuously bright, uniform light band is produced.
This has advantages for various applications:
- Homogeneous line light, even in very flat aluminium profiles
- Continuous, narrow accent or orientation light
- Absolutely uniform indirect lighting at very short distances
In this COB LED strip, warm white and cool white LEDs are mixed. This allows the colour temperature to be adjusted flexibly. From warm light similar to incandescent lamps to neutral tones to cool daylight.
*Balanced control: Many LED drivers, such as our LK55 series, keep the brightness of CCT LED strips constant, regardless of the selected color temperature. This means that at a medium color temperature like 4,000 Kelvin, warm white and cool white LEDs are not controlled with 100% each (which would mean 19.2W/m power consumption), but only with approx. 50% each. Thus, the LED strips are always equally bright, no matter which color temperature is set and also the power consumption remains constant at only about 10W/m.
Available versions
- 5m roll IP20 without water protection, incl. 10cm connection cable
- IP20 sold by the meter in 1 - 40m length
All versions have a 3M adhesive tape on the back for mounting and can be divided every 4.2cm.
Notes on accessories:
A controller with at least 2 channels such as our LK55 is recommended for brightness and color control.
It is best to use the LED strip with a suitable aluminum profile or other solution for cooling. Due to the high power, the LEDs would lose brightness and lifetime very quickly without an aluminum profile. We recommend aluminum profiles with cover to protect the LEDs.
Answers to frequently asked questions can be found in our FAQ.
Properties "Novelty: COB LED strips with adjustable color temperature (CCT): 24 volts - CRI>90"
| Brightness lm/m: | 800, 900 |
|---|---|
| Color temperature: | variable |
| Colour rendering: | CRI>90 |
| Energy efficiency class (EEK): | E |
| Power: | 20 |
| Seperatable every (cm): | 4,2 cm |
| Strip width in mm: | 12 |
| Voltage: | 24V |
| Water protection: | IP20 without waterprotection |
| LED/m: | COB |
Data according to manufacturer. Errors and changes reserved.
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de
datasheet
Power supply
Power supply HLG 24V - 5.0A - 120 Watt, extremely quiet
€59.00*
Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-120-24
Voltage
24V
Maximum power
120W
Current
5A
Adjustable voltage range
22 ~ 27V
Overcurrent protection
95...108%
Inrush current, max.
65A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
2220x68x38.8mm (LxWxH)
Weight
1,120g
Product number:
LED1134
Recommended driver
Control via app with the WLAN variant of the LK55 | 4 x 6A
€79.00*
The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available:
EasyLighting App for Android / für IOS
RealColor App for Android / für IOS
In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example.
The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose.
Notes:
All drivers of our LK35/55 series remember the last setting even in case of power loss.
If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel).
Technical data:
Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20
Dimensions (L*W*H): 171x58x28mm
Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Instruction video for the installation of the LK35-8
Product number:
LK35-8
Suitable remote control for driver
CCT remote control with touch wheel | 4 zones
€49.00*
Color temperature & brightness control,
up to 4 light zones controllable
Touch wheel for color temperature selection
3 memory buttons for individual settings
All CCT remote controls can operate all CCT drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35.
It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver.
Technical data:
Item no.
LK55FB2
Power supply
3 x 1,5V AAA batteries
Dimensions (LxWxH)
120x55x17mm
Operation:
Note: The brightness always remains about the same when the color temperature is changed. With a medium color temperature, warm white and cool white LEDs are only controlled with about 50%, so that you can always set brightness and color temperature completely independently of each other.
Product number:
LK55FB2
Wall control for brightness & color temperature | 1 zone
€34.00*
for LK55 series receivers
Controllable zones: 1
This wall controller can be used to control the brightness and color temperature of an LED installation, e.g. for strips with mixed warm white and cool white LEDs. The RF radio version does not require direct visual contact between remote control and receiver. Suitable drivers/receivers can be found in our universal series LK55.
The wall control works with a push-poti:
Press once: light is switched on/off
Press twice: Switch between brightness and color temperature control. The rotary control can then be used to set brighter/darker or warmer/cooler in each case.
Note: The brightness always remains about the same when changing the color temperature. With a medium color temperature, warm white and cool white LEDs are only controlled with about 50%, so that you can always adjust brightness and color temperature completely independently.
The range of the radio signal is up to 30m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal.
Combination with switch series of well-known manufacturers
The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions:
MERTEN M-Plan
GIRA E2 (flat installation)
JUNG Serie A Creation
KOPP HK i8
ROHDE+ROHDE
Check the exact dimensions directly with the manufacturers.
Combination of controls & drivers
One controller can control any number of drivers and up to 8 wall controllers can address the same driver. Thus, for example, wall controllers can be placed at several locations in the room or, if necessary, combined with classic hand-held remote controls.
Product number:
LK55WCCTw
Wall-mounted touch remote control for CT & Diming | 4 zones
€55.00*
for LK55 series receivers
Controllable zones: 4
Power supply: 230VAC
This wall control in touch panel design can be used to control the brightness and color temperature of an LED installation, e.g. for strips with mixed warm white and cool white LEDs. The RF radio version does not require direct visual contact between remote control and receiver. Suitable controllers/receivers can be found in our universal series LK55.
The touch control can control 4 different light zones separately. In addition, 2 frequently used color temperatures can be stored on quick selection buttons.
Note: The brightness always remains about the same when changing the color temperature. With a medium color temperature, warm white and cool white LEDs are only controlled with about 50%, so that you can always adjust brightness and color temperature completely independently.
The range of the radio signal is up to 30m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal.
Combination with switch series of well-known manufacturers
The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions:
MERTEN M-Plan
GIRA E2 (flat installation)
JUNG Serie A Creation
KOPP HK i8
ROHDE+ROHDE
Check the exact dimensions directly with the manufacturers.
Combination of controls & drivers
One controller can control any number of drivers and up to 8 wall controllers can address the same driver. Thus, for example, wall controllers can be placed at several locations in the room or, if necessary, combined with classic hand-held remote controls.
Technical data:
Item no.
LK55TACCTw
Power supply
110-240VAC
Dimensions (WxHxD)
86x86x12mm, Installation depth: 20mm
Operation:
Product number:
LK55TACCTw