Extra warm white - CRI>95 - 480 LEDs/m - 1.300 + 1.600lm/m

• LED type: 2216 - 240ww+240nw LED/m
• extra warm white & neutral white mixed
• Color temperature: 2.200 - 4.000K
• Brightness: max. 1.300 + 1.600 lm/m*
• Color rendering: High CRI>95
• Voltage: 24V
• Power: 38,4 Watt/m (real approx. 10W/m*)
• Width: 12mm

This LED ribbon has a special color mixture that uses an extra warm white LED. While typical CCT LED strips only start at 2,700 or 3,000 Kelvin, extra warm LEDs with only 2,200 Kelvin are installed here. This warm white corresponds in color tone (not in brightness!) to a dimmed incandescent light and is therefore intended for particularly comfortable lighting moods. 

Alternately, neutral white LEDs with 4,000 Kelvin are installed next to each extra warm white LED. This means that any color temperature can be set between a deep warm white 2,200K, through the typical 2,700 and 3,000K to the neutral, elegant 4,000K.

In addition, the LED strip offers exceptionally high color rendering CRI>95 (R9 also >90). This guarantees absolutely natural colors across the entire light spectrum.

At 4,000K, the LED strip offers a brightness of 1.600 lumens/m. At the extra warm white 2,200K, it is then still about 1.300 lumens/m. This makes the LED strip ideal, for example, when it comes to indirect lighting of small to medium-sized rooms.

*Many LED drivers, such as our LK55 series, keep the brightness of CCT LED strips constant, regardless of the selected color temperature. This means that at a medium color temperature like 4,000 Kelvin, warm white and cool white LEDs are not controlled with 100% each (which would mean 38.4W/m power consumption), but only with approx. 50% each. Thus, the LED strips are always equally bright, no matter which color temperature is set and also the power consumption remains constant at only about 20W/m.

Available versions

• 5m roll IP20 without water protection, incl. 10cm connection cable

All versions have a 3M adhesive tape on the back for mounting and can be divided every 2,5cm.

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 200 Watt is required. 5m x 38,4W/m = 192 Watt.

https://shop.led-studien.de/de/zubehor/netzteile/24v-netzteile

For brightness controll of 5m a controller with min. 8 Ampere is needed. 192W / 24V = 8 Ampere.

https://shop.led-studien.de/de/controller/dimmer-1-2-kanal 

It is best to use the LED strip with a suitable aluminum profile or other solution for cooling. Due to the high power, the LEDs would lose brightness and lifetime very quickly without an aluminum profile. We recommend aluminum profiles with cover to protect the LEDs like our PL1.

Answers to frequently asked questions can be found in our FAQ.