Customised assembly
High-quality technology
Engineering know-how

KNX LED controller for DIN rail 4-channel | 4x4A

€290.00*

Currently not available, please sign up to get notified

Product number: M-103-HAC

This controller can universally be used for white lighting installations with up to four zones, lighting installations with correlated color temperature (CCT) with up to zwo zones as well as RGB or RGBW lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported:

  • automatic dim2warm CCT-function
  • dynamic daylight-control HCL (human centric lighting)
  • automatic time-dependant dimming
  • day/night function

Moreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply.

Download the ETS application.: 

technical data:

- channels: 4x, max. 4A each (power supplied by an external power supply, not inculded)
- channels A/B and C/D can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!)
- dimming via PWM (600/1.000Hz, adjustable)
- operating modes: 4x white, 2xCCT, RGB, RGBW
- specification of the KNX-interface: TP-256
- available KXN-databases: ETS4/5/6
- voltage: 12V-24V DC
- power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W)
- connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible); + shared with LED-stripe
- connectors LED-stripe: 4x screw-terminal: A, B, C, D (0,5-4,0mm² solid, 0,5-2,5mm² flexible)
- connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible)
- IP-class: 20
- operating temperature: 0 - 45 °C
- measurements :4SU

datasheet

Recommended accessories

KNX wall-mounted remote control | 8 buttons
Remote control in for wall mounting with 8 buttons. Scope of delivery: 1x KNX wall remote control LK85-K8 Technical data: Dimensions: LxWxH 86x86mm  
Product number: LK85-K8

€69.00*

Repeater

LED Repeater / Amplifier | 4 x 6A
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each.   Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater.  Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.  Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51

€35.00*