DALI LED driver DT8 universal | PushDim function | 4x4A

€75.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Product number: LK124pro

Available stock: 40

LED controller for DALI and convenient PUSH DIM operation. In addition to DALI functionality, this controller also allows extensive PUSH DIM control, so that, for example, when using appropriate CCT LED strips, on/off, dimming and changing the color temperature are possible with just one light switch.

DALI mode

Since the driver is capable of DT8, it can be operated in different modes:

RGB(W)
RGB+CCT
CCT tunablewhite with 2 outputs each for warm white & cool white
White channels with 4 parallel outputs
XY coordinates for color control

The mode is selected via the small display on the driver, as is the setting of the DALI address. The address can also be assigned automatically by the DALI master.

Wiring for RGBW and XY mode

DALI DT8 LED RGBW Controller

Wiring for CCT mode

DALI DT8 CCT tunable white LED controller

Wiring for white mode

DALI DT8 LED Controller

PUSH DIM mode

The driver also offers a very practical PUSH DIM mode. Instead of the DALI signal, a simple pushbutton is then connected. This offers the following functions:

Single channel mode: Short press > On / Off | Long press > Dimming
CCT tunable white mode:Short press > On / Off | Long press > Dim | Double press > Switch to CCT mode > Long press changes color temperature
RGB mode: Short press > On / Off | Long press > Dim | Double press > Change to RGB color mode > Long press changes color

I.e. it can realize here, for example, with only one light switch on the wall a convenient control of brightness, color temperature (or color) and on / off.

Wiring for PUSH DIM mode (in the example as CCT setup)

LK124 PUSHDIM cct.png

Scope of delivery:

1x Receiver LK124pro

Technical data:

Channels: 5
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port, 1500Hz PWM
Input: (V+/ground, DALI or PUSH DIM in)
Output: (4 x LED channel, V+, DALI out)
IP class: IP 20
Ambient temperature: -20°C - +50°C
Dimensions: LxWxH 170x54x28mm

Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.

Dimensional drawings:

LK124 DALI DT8 Abmessungen

Recommended accessories

DALI pushbutton control for up to 4 pushbuttons

Driver version: Master Control

DALI push-button module for controlling up to 4 DALI luminaires via 4 push-buttons. The compact push-button module fits into the flush-mounted box and can be controlled with up to 4 push-buttons. The two rotary switches can be used to set the start address to be controlled, which is then controlled via push-button K1. Push-button K2 controls start address + 1, K3 start address + 2 and K4 start address +3. A short press on the push-button switches the respective channel on or off alternately, a long press dims up or down. Installation: Technical data: Dimensions: Connections:

Product number: LK110

Variants from €55.00*

€69.00*

DALI wall-mounted touch interface | 4 zones

Driver version: Wall switch

Remote control for wall mounting for use with the 4-channel DALI LED controller LK90 from our program. The individual zones can be switched on/off and dimmed via the buttons. Scope of delivery: 1x wall remote control DALI LK88 Technical data: Dimensions: LxWxH 86x86x41mm

Product number: LK88

€55.00*

DALI bus power supply

Power supply for the DALI bus. Input voltage range: 100-240VAC Output: 16VDC, max. 250mA Installation: Technical data: Dimensions:

Product number: LK109

€79.00*

Repeater

LED Repeater / Amplifier | 4 x 6A

This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each. Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater. Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters. Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.

Product number: LK51

€35.00*