Customised assembly
High-quality technology
Engineering know-how

DALI-LED dimmer 1-channel | 4x4A

€49.00*

Available, delivery time: 3-5 days

Driver version
Product number: LK78
Available stock: 16

This DALI dimmer is designed for 1-channel LED applications, such as dimming single-color or white LEDs.  Each of the 4 outputs is loadable with 4A, which makes even very large installations feasible.

The LED driver works with all known DALI drivers



Scope of delivery:

1x Receiver LK78



Technical data:

Channels: 1
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
load: 4A per output port
Connection: Input (V+/ground, DALI in) Output (4xLED channel, V+, DALI out, Power out)
IP class: IP 20
Dimensions: LxWxH 179x46x19mm

Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.

Recommended accessories

DALI wall-mounted remote control | 4 zones
Driver version: Wall switch
Remote control for wall mounting for use with the 4-channel DALI LED controller LK90 from our program. The individual zones can be switched on/off and dimmed via the buttons. Scope of delivery: 1x wall remote control DALI LK88 Technical data: Dimensions: LxWxH 86x86x41mm  
Product number: LK88

€55.00*
DALI master control | 4 pushbutton connections
Driver version: Master Control
DALI Master Module for controlling up to 4 DALI luminaires via 4 pushbuttons. The compact master module fits into the flush-mounted box and can be controlled with up to 4 pushbuttons. Individual setting of the start address is of course also possible. Installation:     Technical data: Dimensions:   Connections:
Product number: LK110

Variants from €55.00*
€69.00*
DALI bus power supply
Power supply for the DALI bus. Input voltage range: 100-240VAC Output: 16VDC, max. 250mA Installation:   Technical data: Dimensions:
Product number: LK109

€79.00*

Repeater

LED Repeater / Amplifier | 4 x 6A
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each.   Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater.  Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.  Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51

€35.00*