Customised assembly
High-quality technology
Engineering know-how

RGB-Cable 3x0,5mm², 1x 1,5mm² - green

€2.40*

Content: 1 Meter

Available, delivery time: 3-5 days

Product number: l4s-001
Available stock: 38

This cable is specially designed for use with RGB solutions. The problem that the common connection is always loaded with 3 times the current is thus solved. In addition, the cables are kept accordingly RGB-colored and thus safe to connect.



Scope of delivery: RGB cable - length according to your quantity specification



Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance.


Note

It can be difficult to solder the common positive wire with 1.5mm² cross-section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:

1. after you have stripped the 1.5mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the cable is much easier to solder to the LED strip.

2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.75mm². Solder this to the LED strip and then connect it to the 1.5mm² positive wire of the RGBW cable. For the connection, you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp it and (before!) slide a heat shrink tube over it for insulation.

A reduced cable cross-section is unproblematic for the short distance.



Technical data:

3 cores 0,5mm² | 1 core 1,5mm²
PVC (Y), unshielded according to UDE0207
Temperature range: -30° to +70°C dormant, -5° to +70°C moving
Outer diameter: 6.6mm
Max. Current load: 5 Amps per color (15A total) 
Voltage up to 24V DC

Properties "RGB-Cable 3x0,5mm², 1x 1,5mm² - green"
Cable version: 4-core
Data according to manufacturer. Errors and changes reserved.

Passende Klemmen

WAGO terminal 221 2 cored
WAGO's new COMPACT connection terminal 221 is suitable for all types of conductors. The operating levers move smoothly, yet you have a wide range for the cross-section and a secure connection.   Technical data: Total number of potentials  1  Color  transparent  Design data according to 1  EN 60664  Rated voltage EN (1) [V]  450  Rated surge voltage (1) [kV]  4  Rated current (1) [A]  32  Connection technology (1)  CAGE CLAMP®  Ladder type 1  solid + stranded  Cross section from   0.2 mm² / 24AWG Cross section until   4 mm² / 12 AWG Ladder type 2  finely stranded  Cross section from 0.14 mm² / 24 AWG Cross section until  4 mm² /12 AWG Stripping length from   11 mm  Wiring type   Side wiring  Flammability class according to UL 94  V2  Weight [g]  2,5  Width 2/3/5 pole 13.1/18.7/29.9 mm  Height  8.3 mm  Depth  18.6 mm   
Product number: W221mas

€0.49*
WAGO 221 Brackets for 2/3/5-way terminals
Holders for WAGO's 221 terminal blocks.  One terminal can be inserted into each holder. Several holders can be plugged together, and different ones can also be combined. Each holder can be screwed on via holes. In addition, there are lugs for cable ties. However, these tabs can be easily removed if they are not needed. The tabs can simply be broken off for this purpose.  
Product number: W221-Halter

€1.20*
WAGO D2411 holders
Compact holders for the narrow D2411 feed-through connectors from WAGO. In each case, 3 or 5 terminals fit next to each other, thus enabling clean installation, e.g., in the control cabinet or in a light cove.   
Product number: D2411-Halterungen

€1.20*
WAGO IP68 gel box
Waterproof gel box for WAGO terminals. Simple, fast and safe handling  Immediately ready for use and accessible again  Silicone-free  Label-free  Can be stored indefinitely  Complete system consisting of gel boxes and WAGO terminal blocks is VDE-tested and IPX8-certified Dimensions: W 46 x H 18 x D 34mm, width inside 35mmSuitable for: 2 x W221-2 or 1 x W221-5
Product number: W221-gel

€9.90*