Light cove ORAC C381 - 2m

ORACDECOR

€96.30*

Content: 2 Meter (€48.15* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Product number: OD-C381

Available stock: 989

Straight cove for indirect light.

Combines well with C380, C382 and C383.

Paintable
Waterproof

Do you need a sample piece?

Mounting

ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories".

The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide.

Technical data:

Material: PUROTOUCH®

Dimensions:

Length: 2m

Space for power supplies & driver: 37 x 39mm

Manufacturer

ORAC nv

Biekorfstraat 32

8400 Ostend

Belgium

^{deutschland@oracdecor.com}

Recommended accessories

DECOFIX PRO - 310ML

DecoFix glue & filler: Indoor application

DecoFix Pro is a strong, water-based acrylic adhesive for mounting ORAC profiles on a wall. Application: Interior - porous/absorbent and dry substrates. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 310ml

Product number: OD-FDP500

€8.90*

DECOFIX HYDRO - 290ML

DecoFix glue & filler: Outdoor application

DecoFix Hydro is an extra strong, MS polymer adhesive for mounting ORAC profiles on a wall or ceiling. Application: Exterior - Non-porous/absorbent substrate and for damp areas. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 290ml

Product number: OD-FDP700

Variants from €8.90*

€19.00*

DECOFIX ULTRA - 400ML

DecoFix glue & filler: Seams

DecoFix Ultra is a polyurethane-based adhesive, especially for the joints between 2 ORAC DECOR profiles, e.g. in corners or on sections longer than 2m. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 400ml

Product number: OD-FX400

Variants from €8.90*

€28.00*

5m silicone insert cover 10x10mm

The flexible silicone insert covers are ideal if LED lighting is to be integrated into grooves, e.g. in an acoustic panel. The LED strip is glued into the groove at the bottom (aluminum profiles should be used from 5W/m) and then the silicone insert cover is pressed into the groove from above.The flexible silicone means that curves are also possible and the opal structure of the cover effectively blends LED points (from 120 LEDs/m). The result is a uniform, homogeneous line of light.Please note that this concept is not suitable for high-power LED strips, as there is insufficient cooling effect. Only LED strips with max. 5W/m should be used without an aluminum profile. Slightly higher wattages are also possible with flat aluminum profiles. Technical data: Width: 15 mm Height: 10 mmRequired groove width: 9-10 mmRequired groove depth: min. 10 mm Max. width for LED strips: 10 mmWe recommend a pressure roller for gluing and lightly pressing on the LED strips.

Product number: EBC1010mas

Content: 5 Meter (€0.00* / 1 Meter)

€0.00*

Details

5m silicone insert cover 15x10mm

The flexible silicone insert covers are ideal if LED lighting is to be integrated into grooves, e.g. in an acoustic panel. The LED strip is glued into the groove at the bottom (aluminum profiles should be used from 5W/m) and then the silicone insert cover is pressed into the groove from above.The flexible silicone means that curves are also possible and the opal structure of the cover effectively blends LED points (from 120 LEDs/m). The result is a uniform, homogeneous line of light.Please note that this concept is not suitable for high-power LED strips, as there is insufficient cooling effect. Only LED strips with max. 5W/m should be used without an aluminum profile. Slightly higher wattages are also possible with flat aluminum profiles. Technical data: Width: 20 mm Height: 10 mmRequired groove width: 13-15 mmRequired groove depth: min. 10 mm Max. width for LED strips: 15 mmWe recommend a pressure roller for gluing and lightly pressing on the LED strips.

Product number: EBC1510mas

Content: 5 Meter (€0.00* / 1 Meter)

€0.00*

Details

2m LED-Micro-profile PL1

The LED micro profile PL1 looks very inconspicuous due to its particularly narrow and flat design. It is mainly used indoors. The groove of the profile can hold up to 12 mm wide LED strips. In addition, this aluminum profile provides improved heat dissipation from the LED strips, which increases their service life. Technical data: Width: 16.8 mm Height: 6 mm Length: 2 m Width inside for LED strips: 12.4 mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: AL21bund

€15.40*

Details

2m LED insert profile PN5

The PN5 LED recessed profile has a narrow design and is designed for LED flex strips with a maximum width of 24 mm.Technical data:Width: 33.6 mm (insert: 26.8mm) ´Height: 11.7mm Length: 2m Width inside for LED strips: max. 24mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: Al38bund

€28.80*

Details

24mm LED surface mount profile PN6

The PN6 LED surface-mounted profile is a larger profile and is designed for LED strips with a maximum width of 24 mm (including 2 adjacent strips). It is mainly used indoors (also as a stand-alone LED pendant luminaire with wire suspension or as a fixed LED luminaire with mounting springs).Technical data: Width: 33.6 mm Height: 26 mmLength: 2 m Width inside for LED strips: max. 20 mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: AL20bund

€36.70*

Details