Sold by meter: LED-Strip LK04-6M
€0.00
Available, delivery time: 3-5 days
Sale by the meter. Specify how many meters you need.
The specified quantity is always delivered as 1 tape , so e.g. quantity 7 is one tape with 7m length and not 7 tapes with 1m each. A maximum of 30m is possible on a single roll.
Meter goods are delivered without connection cable as standard. On request, you can order suitable, already soldered connection cables in the desired length.
In case of very long sections (>5m) you may have to consider the issue of voltage drop when wiring!
Ordering several assemblies
If you want to order several lengths, simply put them one after the other into the shopping cart. So e.g. first 7m with connection cable and then 3m with connection cable. The shopping cart will then display the lengths individually with the selected connection cable.
- LED type: 5050 RGBW LEDs (4-in-1)
- 72 LED/m
- Brightness: 1,500lm/m total (600lm/m for white)
- Voltage: 12 & 24 volt versions available
- Power: 23 Watt/m
- Width: 12mm
The latest form of RGBW and RGBWW LED strips consists of 4-in-1 LEDs. Here, all 4 colors are integrated into one LED housing. This means you no longer have alternating white and RGB LEDs on the flex strip and a homogeneous light distribution even at short distances. An ideal solution e.g. for effect lighting applications and accent lighting either for direct or indirect light.
Another new feature of these LED strips is the LED count of 72 LEDs/m. This promises an even higher luminosity for color effects. In total, the LED strip produces 1,500 lumens per meter (lm/m). The warm white chips reach 600lm/m.
Available in versions with 12 and 24V and also with higher IP protection, e.g. for the bathroom or other wet rooms.
RGB+Cool white: On request, the LED strips are also available with a cold white LED instead of a warm white LED.
Available variants
- 5m roll 24V IP20 without water protection, incl. 10cm connection cable
- 5m roll 24V IP67 without water protection, incl. 10cm connection cable
- Meter goods in 1-30m lenghth
All variants have a 3M adhesive tape on the back for mounting and are divisible every every 8.3cm.
Notes on accessories:
To operate 5m (1 roll) of LED strips, a 12 or 24V power supply with min. 130 Watt is required. 5m x 23W/m + 10% safety = 127 Watt.
For color control of the 5m in 12V version an RGBW driver (4-channel) with min. 4 x 2,6 Amp is needed. 127W / 12V / 4 = 2.6 Amps.
For a color control of the 5m in 24V version a RGBW driver (4-channel) with min. 4 x 1,3 Amp is needed. 127W / 24V / 4 = 1,3 Ampere.
Answers to frequently asked questions can be found in our FAQ.
| Brightness lm/m: | 1500 |
|---|---|
| Cutable every (cm): | 8,3 cm |
| Energy efficiency class: | G |
| LED stripe width (mm): | 12 |
| Nominal power: | 25 |
| Voltage: | 24V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 72 |
Power supply
Recommended driver
Suitable remote control for driver
