RGBWW for accent lighting: 4in1 LEDs - 72 LEDs/m - 24V - IP20 10m roll
- LED type: 5050 RGBW LEDs (4-in-1)
- 72 LED/m
- Brightness: 1,500lm/m total (600lm/m for white)
- Voltage: 12 & 24 volt versions available
- Power: 23 Watt/m
- Width: 12mm
Price for 1 roll = 5 meters
The latest form of RGBW and RGBWW LED strips consists of 4-in-1 LEDs. Here, all 4 colors are integrated into one LED housing. This means you no longer have alternating white and RGB LEDs on the flex strip and a homogeneous light distribution even at short distances. An ideal solution e.g. for effect lighting applications and accent lighting either for direct or indirect light.
Another new feature of these LED strips is the LED count of 72 LEDs/m. This promises an even higher luminosity for color effects. In total, the LED strip produces 1,500 lumens per meter (lm/m). The warm white chips reach 600lm/m.
Available in versions with 12 and 24V.
All variants have a 3M adhesive tape on the back for mounting, are divisible every 4.15cm (12V variant) or every 8.3cm (24V variant).
Notes on accessories:
To operate 5m (1 roll) of LED strips, a 12 or 24V power supply with min. 130 Watt is required. 5m x 23W/m + 10% safety = 127 Watt.
For color control of the 5m in 12V version an RGBW driver (4-channel) with min. 4 x 2,6 Amp is needed. 127W / 12V / 4 = 2.6 Amps.
For a color control of the 5m in 24V version an RGBW driver (4-channel) with min. 4 x 1,3 Amp is needed. 127W / 24V / 4 = 1,3 Ampere.
Answers to frequently asked questions can be found in our FAQ.
| Brightness lm/m: | 1500 |
|---|---|
| Cutable every (cm): | 4,2 cm |
| Energy efficiency class: | G |
| LED stripe width (mm): | 12 |
| Nominal power: | 25 |
| Voltage: | 12V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 72 |
Recommended driver
Suitable remote control for driver
Suitable cables
