Meter: RGBW LED-Strip LK04-6q
- LED type: 5050 - RGBW (4in1) - 60 LED/m
- With constant current sources (KSQ) for longer installations without a drop in brightness
- Brightness: 1.050lm/m total (450lm/m for white)
- Voltage: 24V
- Power: 17,6 Watt/m
- Width: 12mm
Sold by meter
The newest form of RGBWW LED strips consists of 4 in 1 LEDs. Thereby all 4 colors are integrated in one LED housing. This means that you no longer have alternating white and RGB LEDs on the flex strip and thus a harmonious light distribution even at short distances. An ideal solution e.g. for effect lighting applications in confined areas!
The special feature of this variant is the built-in constant current sources (KSQ). These counteract the voltage and brightness drop that is otherwise typical of LED strips over longer lengths (over 5 metres). The KSQ compensate for the voltage drop and thus always supply the LEDs with the correct current. Even with a single-sided power supply, LED installations up to 10m lenght can be realised without a visible drop in brightness.
Available versions
- 5m roll IP20 water protection with silicone coating, incl. 10cm connection cable.
Furthermore, the LED tape is available as meter goods IP20 in 1 - 30m length.
All variants have a 3M adhesive tape on the back for mounting and can be divided every 10cm.
Notes on accessories:
To operate 5m (1 roll) of LED strips, a 24V power supply with min. 100 Watt is required. 5m x 17.6W/m + 10% safety = 97 Watt.
For a color control of the 5m a RGBW controller (4 channel) with min. 4 x 1 Amp is needed. 97W / 24V / 4 = 1 Ampere.
Answers to frequently asked questions can be found in our FAQ.
| Brightness lm/m: | 1000 |
|---|---|
| Cutable every (cm): | 10 cm |
| Energy efficiency class: | G |
| LED stripe width (mm): | 12 |
| Nominal power: | 18 |
| Voltage: | 24V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 60 |
Power supply
Recommended driver
Suitable remote control for driver
Suitable accessories for IP67
