Customised assembly
High-quality technology
Engineering know-how

Z-Wave LED driver | 4x4A


Available, delivery time: 3-5 days

Product number: LK96
Available stock: 4

This driver is developed for the Z-Wave standard and offers 4 channels, e.g. to control RGB or RGBW LED strips. There are 4 outputs on the controller, each of which can be loaded with 4A. Thus, even very large installations are feasible.

Z-Wave drivers are ideal for integration into home automation solutions such as FHEM.


Scope of delivery:

1x Receiver LK96


Technical data:

Channels: 4 
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port
Connection: input (V+/ground) output (4xLED channel, V+)
IP class: IP 20
Dimensions (L*W*H): 170*54*28mm


LED Repeater / Amplifier | 4 x 6A
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each.   Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater.  Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.  Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51