Power supply HLG 24V - 10A - 240 Watt, extremely quiet

€68.00*

Content: 1

Available, delivery time 3-5 days

Product number: LED1122
Available stock: 28

Switching power supply Meanwell HLG-240-24, 24 Volt, 10 Ampere, 240W

  • overload protection by current limiting, auto recovery
  • protected against short circuit, overload, overvoltage
  • built-in PFC circuit
  • for indoor and outdoor use (IP65)
  • adjustable output voltage
  • adjustable current limitation



Note on the connection of LED drivers

The HLG-240-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.



Technical data:

 Model HLG-240-24
 Voltage 24V
 Maximum power 240W
 Current 10A
 Adjustable voltage range 5 ~ 10V
 Voltage input 230VAC
 Overcurrent protection 95...108%
 Inrush current, max. 75A
 Voltage input 90...264V AC (47...63Hz), 127...370V DC
 Power factor 0,95
 Working temperature -40...+70°C
 Dimensions 244.2x68x38.8mm (LxWxH)
 Weight 1,300g
Properties "Power supply HLG 24V - 10A - 240 Watt, extremely quiet"
IP protection: IP65
Power: 240 Watt
Power supply type: HLG
Voltage: 24V
Data according to manufacturer. Errors and changes reserved.

Recommended accessories

Schuko connection cable, 3-wire, 150cm, white
For all larger power supplies with protective contact leads, such as the entire Meanwell HLG series. Straight grounding plug (CEE 7/4) and open end with wire end ferrules. Notice: The connection of 230V supply lines must never be carried out under current and must be carried out by a qualified electrician. There is a danger to life here!
Product number: K12w

€4.90*
WAGO terminal 221 2 cored
WAGO's new COMPACT connection terminal 221 is suitable for all types of conductors. The operating levers move smoothly, yet you have a wide range for the cross-section and a secure connection.   Technical data: Total number of potentials  1  Color  transparent  Design data according to 1  EN 60664  Rated voltage EN (1) [V]  450  Rated surge voltage (1) [kV]  4  Rated current (1) [A]  32  Connection technology (1)  CAGE CLAMP®  Ladder type 1  solid + stranded  Cross section from   0.2 mm² / 24AWG Cross section until   4 mm² / 12 AWG Ladder type 2  finely stranded  Cross section from 0.14 mm² / 24 AWG Cross section until  4 mm² /12 AWG Stripping length from   11 mm  Wiring type   Side wiring  Flammability class according to UL 94  V2  Weight [g]  2,5  Width 2/3/5 pole 13.1/18.7/29.9 mm  Height  8.3 mm  Depth  18.6 mm   
Product number: W221mas

From €0.49*
Schuko connection cable, 3-wire, 150cm, black
For all larger power supplies with protective contact leads, such as the entire Meanwell HLG series. Straight grounding plug (CEE 7/4) and open end with wire end ferrules. Notice: The connection of 230V supply lines must never be carried out under current and must be carried out by a qualified electrician. There is a danger to life here!
Product number: K12

€5.30*