3D wall cover ORAC WX204 Ripple - 200x25cm

€49.00*

Content: 2 Meter (€24.50* / 1 Meter)

Available, delivery time: 3-5 days

Product number: OD-WX204

Available stock: 1000

Let your creativity run wild with 3D wall panels from ORACDECOR.

3D wall panels are flat, textured panels with trendy, repeating design. They make the room look bigger and more interesting, creating many possibilities for personalizing interiors. The wall panels can be painted, rolled, sprayed, etc. just like a wall and can be designed in any way you like.

In combination with indirect light, e.g. hidden behind a C380 cove from ORACDECOR, impressive light effects and reflections can be achieved. Your wall or ceiling will become a work of art. You can completely cover a wall or turn an empty wall into an eye-catcher with a few panels. These panels can also be used to visually enhance interior design elements such as a counter, a freestanding wall or a reception desk!

The WX204 can be used on both sides and offer different textures on the front and back for even more creativity.

Paintable
Waterproof
Shockproof
Easy to install
Also available in 260cm length upon request

Mounting

ORACDECOR 3D wall panels are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". For a convincing lighting effect, a so-called grazing light can be used, which is led over the wall panels at a 90° angle. For this purpose, for example, LED profiles can be hidden in a light cove (e.g. C380) adjacent to the wall panel, whose light then grazes over the structure of the wall panel.

If a discreet end strip without light integration is desired, the simple CX190 U-profile is ideal, in which cables can even be concealed if required.

Feel free to talk to us about realization possibilities. You can also find detailed instructions & tips for installation directly on the help pages of ORACDECOR.

Technical data:

Dimensions: 200 x 25 x 1.6cm

Material: DUROPOLYMER®

Recommended adhesives

DECOFIX PRO - 310ML

DecoFix glue & filler: Indoor application

DecoFix Pro is a strong, water-based acrylic adhesive for mounting ORAC profiles on a wall. Application: Interior - porous/absorbent and dry substrates. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 310ml

Product number: OD-FDP500

€8.90*

DECOFIX HYDRO - 290ML

DecoFix glue & filler: Outdoor application

DecoFix Hydro is an extra strong, MS polymer adhesive for mounting ORAC profiles on a wall or ceiling. Application: Exterior - Non-porous/absorbent substrate and for damp areas. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 290ml

Product number: OD-FDP700

Variants from €8.90*

€19.00*

DECOFIX ULTRA - 400ML

DecoFix glue & filler: Seams

DecoFix Ultra is a polyurethane-based adhesive, especially for the joints between 2 ORAC DECOR profiles, e.g. in corners or on sections longer than 2m. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 400ml

Product number: OD-FX400

Variants from €8.90*

€28.00*

Cove & moulding finish

Light cove ORAC CX190 - 2m

Subtle and shockproof U-shaped profile. Designed by Orio Tonini Paintable WaterproofDo you need a sample piece? Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: DUROPOLYMER® Dimensions: Length: 2m

Product number: OD-CX190

Content: 2 Meter (€9.00* / 1 Meter)

€18.00*

Light cove ORAC C380 - 10cm sample

Straight cove for indirect light. Combines well with C381, C382 and C383. Designed by Orio Tonini. PaintableWaterproof More ORAC samples Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: PUROTOUCH® Dimensions: Length: 10cm sample

Product number: OD-C380-10

Content: 2 Meter (€2.00* / 1 Meter)

€4.00*

Light cove ORAC C380 - 2m

Straight cove for indirect light. Combines well with C381, C382 and C383. Designed by Orio Tonini. PaintableWaterproof Do you need a sample piece? Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: PUROTOUCH® Dimensions: Length: 2m

Product number: OD-C380

Content: 2 Meter (€34.40* / 1 Meter)

€68.80*

Light cove ORAC C381 - 10cm sample

Straight cove for indirect light. Combines well with C380, C382 and C383. Designed by Orio Tonini. PaintableWaterproof More ORAC samples Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: PUROTOUCH® Dimensions: Length: 10cm sample Space for power supplies & driver: 37 x 39mm

Product number: OD-C381-10

Content: 2 Meter (€2.00* / 1 Meter)

€4.00*

Light cove ORAC C381 - 2m

Straight cove for indirect light. Combines well with C380, C382 and C383. Designed by Orio Tonini. PaintableWaterproof Do you need a sample piece? Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: PUROTOUCH® Dimensions: Length: 2m Space for power supplies & driver: 37 x 39mm

Product number: OD-C381

Content: 2 Meter (€48.15* / 1 Meter)

€96.30*

Light cove ORAC C382 - 10cm sample

Straight cove for indirect light. Combines well with C380, C381 and C383. Designed by Orio Tonini. PaintableWaterproof More ORAC samples Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: PUROTOUCH® Dimensions: Length: 10cm sample

Product number: OD-C382-10

Content: 2 Meter (€2.00* / 1 Meter)

€4.00*

Light cove ORAC C382 - 2m

Straight cove for indirect light. Combines well with C380, C381 and C383. Designed by Orio Tonini. PaintableWaterproof Do you need a sample piece? Mounting ORACDECOR light coves are glued to the wall with special FDP glue and to butt edges with FX glue. These mounting adhesives can be found below under "Recommended accessories". The LED strips should never be glued directly into the coving for optimal heat dissipation and long life, but should be installed in the coving with aluminum profiles, such as our PL1. I.e. first the aluminum profile is placed in the cove and then the LED tape is glued into it. Since the cove itself is not 100% light-tight, the aluminum profiles also provide a clean light guide. Technical data: Material: PUROTOUCH® Dimensions: Length: 2m

Product number: OD-C382

Content: 2 Meter (€55.00* / 1 Meter)

€110.00*