RGBWW for accent lighting: 4in1 LEDs - 72 LEDs/m - 24V - IP20 5m roll

LED-Studien GmbH

a g

product-datasheet

€82.50*

Content: 5 Meter (€16.50* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Voltage

12V

24V

Length/VPE

5m - IP20

10m - IP20

Rolle

Product number: LK04-6d

Available stock: 18

LED type: 5050 RGBW LEDs (4-in-1)
72 LED/m
Brightness: 1,500lm/m total (600lm/m for white)
Voltage: 12 & 24 volt versions available
Power: 23 Watt/m
Width: 12mm

Price for 1 roll = 5 meters

The latest form of RGBW and RGBWW LED strips consists of 4-in-1 LEDs. Here, all 4 colors are integrated into one LED housing. This means you no longer have alternating white and RGB LEDs on the flex strip and a homogeneous light distribution even at short distances. An ideal solution e.g. for effect lighting applications and accent lighting either for direct or indirect light.

Another new feature of these LED strips is the LED count of 72 LEDs/m. This promises an even higher luminosity for color effects. In total, the LED strip produces 1,500 lumens per meter (lm/m). The warm white chips reach 600lm/m.

Available in versions with 12 and 24V.

All variants have a 3M adhesive tape on the back for mounting, are divisible every 4.15cm (12V variant) or every 8.3cm (24V variant).

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 12 or 24V power supply with min. 130 Watt is required. 5m x 23W/m + 10% safety = 127 Watt.

For color control of the 5m in 12V version an RGBW driver (4-channel) with min. 4 x 2,6 Amp is needed. 127W / 12V / 4 = 2.6 Amps.

For a color control of the 5m in 24V version an RGBW driver (4-channel) with min. 4 x 1,3 Amp is needed. 127W / 24V / 4 = 1,3 Ampere.

Answers to frequently asked questions can be found in our FAQ.

Properties "RGBWW for accent lighting: 4in1 LEDs - 72 LEDs/m - 24V - IP20 5m roll"

Brightness lm/m:	1500
Energy efficiency class (EEK):	G
Power:	25
Seperatable every (cm):	8,3 cm
Strip width in mm:	12
Voltage:	24V
Water protection:	IP20 without waterprotection
LED/m:	72

Data according to manufacturer. Errors and changes reserved.

Manufacturer

LED-Studien GmbH

Mühlenweg 15

04451 Panitzsch

^{info@led-studien.de}

datasheet

Recommended driver

LK55 Universal Controller 12-36V for LED Strips, Panels etc.

Product number: LK55mas

€59.00*

Details

Control via app with the WLAN variant of the LK55 | 4 x 6A

The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose. Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss. If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel). Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8

Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones

Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All RGB(W) remote controls can operate all RGB(W) drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data: Item no. LK55FB3 Power supply 3 x 1,5V AAA batteries Dimensions (LxWxH) 120x55x17mm Operation:

Product number: LK55FB3

€49.00*

RGBW touch wall control | 1 zone | white

Select variant: 1 Zone | Color: white

Touch control for RGBW driver of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zone Wall remote control with touch field (4 memory keys) 4 Zone Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data: Item no. LK55w4bw Power supply 110-240VAC Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:

Product number: LK55w4bw

€52.50*

Suitable cables

RGBW flat ribbon cable 5x0,5mm²

This cable is a universal flat ribbon cable with 5 wires with 0.5mm² each in the colors black, white, green, blue, red. Scope of delivery: RGBW cable - length according to your quantity specification Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance. Technical data: 5 cores a 0,5mm²

Product number: LK59

€1.49*

5-pin RGBW connector (IP67) - with 2 x 1m cable

Set of plug and socket for RGBW LED strips or other connections with 5 connectors IP67 waterprotected with 2 x 1m cable Max. Connected load: 5 Ampere per contact Diameter: 16mm Lenght of complete connectors: 82mm Cable (1m pre-crimped) with 2 x 1mm² and 3 x 0.3mm²

Product number: LK27

€7.80*