DALI LED driver DT8 universal | DALI master function | 4x4A
LED controller for DALI and PUSHDIM operation with 4 x 4 Amp outputs.
DALI mode
Since the driver is capable of DT8, it can be operated in different modes:
- RGB(W)
- CCT tunablewhite with 2 outputs each for warm white & cool white
- XY coordinates for color control
The mode is selected via the small display on the driver, as is the setting of the DALI address. The address can also be assigned automatically by the DALI master.
DALI master function
The controller can take over DALI master functions and therefore does not require a separate DALI master. Typical DALI functions such as assigning to groups and scenes, setting fade times, min. brightness level, power on behavior and much more can be carried out directly on the controller.
Wiring example
Scope of delivery:
1x Receiver LK124
Technical data:
Channels: 4
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port
Input: (V+/ground, DALI or PUSH DIM in)
Output: (4 x LED channel, V+, DALI out)
IP class: IP 20
Ambient temperature: -20°C - +50°C
Dimensions: LxWxH 170x54x28mm
Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Dimensional drawings:
Recommended accessories
Repeater
