1m LED strip RGB 3in1 5 Volt: 60 LEDs/m - 18 W/m
- LED Typ: 5050 RGB-LEDs (3in1 -all colors in one LED)
- 60 RGB-LED/m
- Brightness: total approx. 240 lm/m
Red: 30 lm/m
Green: 170 lm/m
Blue: 40 lm/m - Voltage: 5 Volt
- Power: 18 Watt/m
- Width: 10mm
- divisible after 3 RGB LED (every 5cm)
RGB special LED strip with high brightness for 5 Volt operation.
Due to the low operating voltage of only 5V, this LED strip can even be operated directly via a USB power supply or on the laptop! However, note the high power of 18 watts/m or 3.6 amps/m! For example, only a maximum of 8 LEDs (13cm) can be operated at a USB port on the computer, since this USB output can only handle 0.5 amps.
Therefore please pay attention to our hints for accessories in any case! Power supplies that can operate up to 7m of this LED strip are available in the store.
Scope of delivery:
1m RGB strip 5V 60 pieces 5050 LEDs
- up to 5m available in one piece -
Notes on accessories:
To operate 1m LED strips a 5V power supply with min. 20 Watt is needed. 1m x 18W/m + 10% safety = 20 Watt.
https://shop.led-studien.de/de/zubehor/netzteile/5v-netzteile
For color control of the 1m strip, an RGB controller (min. 3-channel) with min. 3 x 1.35 Amps is required. 20W / 5V / 3 = 1.35 Amps.
https://shop.led-studien.de/de/controller/standard-rgbw
Answers to frequently asked questions can be found in our FAQ.
| Brightness lm/m: | 200 |
|---|---|
| Energy efficiency class (EEK): | G |
| Power: | 18 |
| Seperatable every (cm): | 5,0 cm |
| Strip width in mm: | 10 |
| Voltage: | 5V |
| Water protection: | IP20 without waterprotection |
| LED/m: | 60 |
Accessories for 5V LED stip
