RGBWW 4in1 IP68 for underwater: 60 LEDs/m - 14mm wide

LED-Studien GmbH

a g

product-datasheet

€92.50*

Content: 5 Meter (€18.50* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Rolle

Product number: LK04-6k

Available stock: 18

LED Typ: 5050 - RGBW (4in1) - 60 LED/m
Water protected with IP68
Brightness: 1,220lm/m total. (500lm/m for white)
Voltage: 24V
Power: 19,2 Watt/m
Width: 14mm

Price for 1 roll = 5 meters

The latest form of RGBWW LED strips consists of 4 in 1 LEDs. Here, all 4 colors are integrated into one LED housing. This means you no longer have alternating white and RGB LEDs on the flex strip and thus a harmonious light distribution even at short distances. An ideal solution e.g. for effect lighting applications in confined areas!

This version is water protected with a silicone tube and additional silicone filling. Thus, the RGBWW LED strip achieves IP68 and is therefore, in addition to outdoor applications or e.g. also in the bathroom, the right choice for use under water. For all permanent applications under water, such as in the pool, pond or fountain, a minimum protection of IP68 is required, IP67 or even smaller variants are not sufficient!

On the LED tape is directly soldered 1m connection cable with connector. In addition, another 1m cable with the matching counterpart of the connector is supplied. However, the connector itself is only IP67 and, if this is to be used under water, still requires an IP68 sleeve (e.g. from RAYTECH).

Available variants

5m-Roll IP68 Water protection in silicone hose and additional silicone filling, incl. 1+1m connection cable.

All variants have a 3M adhesive tape on the back for mounting and are divisible every 10cm.

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 110 Watt is required. 5m x 19,2W/m + 10% safety = 110 Watt.

https://shop.led-studien.de/de/zubehor/netzteile

For a color control of the 5m in 24V version a RGBW controller (4-channel) with min. 4 x 1,2 Amps is needed. 110W / 24V / 4 = 1,2 Amps.

https://shop.led-studien.de/de/controller/standard-rgbw

You will find answers to frequently asked questions in our FAQ.

Properties "RGBWW 4in1 IP68 for underwater: 60 LEDs/m - 14mm wide"

Brightness lm/m:	1200
Energy efficiency class (EEK):	G
Power:	20
Seperatable every (cm):	10 cm
Strip width in mm:	14
Voltage:	24V
Water protection:	IP68 underwater
LED/m:	60

Data according to manufacturer. Errors and changes reserved.

Manufacturer

LED-Studien GmbH

Mühlenweg 15

04451 Panitzsch

^{info@led-studien.de}

Power supply

Power supply HLG 24V - 5.0A - 120 Watt, extremely quiet

Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data: Model HLG-120-24 Voltage 24V Maximum power 120W Current 5A Adjustable voltage range 22 ~ 27V Overcurrent protection 95...108% Inrush current, max. 65A Voltage input 90...264V AC (47...63Hz), 127...370V DC Power factor 0,95 Working temperature -40...+70°C Dimensions 2220x68x38.8mm (LxWxH) Weight 1,120g

Product number: LED1134

€59.00*

Recommended driver

LK55 Universal Controller 12-36V for LED Strips, Panels etc.

Product number: LK55mas

€59.00*

Details

Control via app with the WLAN variant of the LK55 | 4 x 6A

The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose. Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss. If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel). Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8

Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones

Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All RGB(W) remote controls can operate all RGB(W) drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data: Item no. LK55FB3 Power supply 3 x 1,5V AAA batteries Dimensions (LxWxH) 120x55x17mm Operation:

Product number: LK55FB3

€49.00*

RGBW touch wall control | 1 zone | white

Select variant: 1 Zone | Color: white

Touch control for RGBW driver of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zone Wall remote control with touch field (4 memory keys) 4 Zone Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data: Item no. LK55w4bw Power supply 110-240VAC Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:

Product number: LK55w4bw

€52.50*

Suitable accessories for water protection

Silicone (acetate-free!) - 5ml

With this silicone you can seal neonflex- or normal LED-stripes in a silicone tube (IP67/68) with the corresponding end-caps watertight. This is especially usefull if a roll has to be devided into several parts. The silicone is acetate-free, thus no acetic acid is produced while curing, which would damage the electrical components.A tube with 5ml is enough to seal approx. 2-5 end-caps (depending on the size of the end-caps).

Product number: SIL01

€2.50*

Silicone end cap: 14mm

Suitable silicone can be ordered separately.

Product number: SAK14

€0.30*

mounting clamp for 14mm silicone

Montageklammer C14 Metall -14,2mm Breite - geeignet für Silikonschlauch

Product number: AL-KLH07

€0.95*

5-pin RGBW connector (IP67) - with 2 x 1m cable

Set of plug and socket for RGBW LED strips or other connections with 5 connectors IP67 waterprotected with 2 x 1m cable Max. Connected load: 5 Ampere per contact Diameter: 16mm Lenght of complete connectors: 82mm Cable (1m pre-crimped) with 2 x 1mm² and 3 x 0.3mm²

Product number: LK27

€7.80*