Power supply HLG 24V - 13A - 320 Watt, extremely quiet

Meanwell

€99.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Product number: LED1126

Available stock: 23

Switching power supply Meanwell HLG-320-24, 24 Volt, 13.3 Ampere, 320W - without fan!

overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation

Note on the connection of LED drivers

The HLG-240-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.

Technical data:

Model	HLG-320-24
Voltage	24V
Maximum power	320W
Current	13.3A
Adjustable voltage range	21 ~ 26V
Overcurrent protection	95...108%
Inrush current, max.	75A
Voltage input	90...264V AC (47...63Hz), 127...370V DC
Power factor	0,94
Working temperature	-40...+70°C
Dimensions	252x90x43.8mm (LxWxH)
Weight	1,880g

Properties "Power supply HLG 24V - 13A - 320 Watt, extremely quiet"

IP protection:	IP65
Power:	320 Watt
Power supply type:	HLG
Voltage:	24V

Data according to manufacturer. Errors and changes reserved.

Manufacturer

MEAN WELL EUROPE N.V.

Langs de Werf 8

1185XT Amstelveen

The Netherlands

^{www.meanwell.eu}

Recommended accessories

Connection cable for driver with double input

Y-cable for driver with double input. This allows both inputs of the driver to be used and effectively splits the current load. 2 variants are available: 0,75mm² for connections up to 12A 1,5mm² for connections up to 25A Note: Due to the wide wire end ferrules on the power supply side, the connection cables do not fit into typical WAGO terminals here. Instead, use e.g. classic luster terminals.

Product number: K0910mas

€2.90*

Details

WAGO 221 Terminal 2-pole

WAGO terminal: 2-fold

WAGO's new COMPACT connection terminal 221 is suitable for all types of conductors. The operating levers move smoothly, yet you have a wide range for the cross-section and a secure connection. Technical data: Total number of potentials 1 Color transparent Design data according to 1 EN 60664 Rated voltage EN (1) [V] 450 Rated surge voltage (1) [kV] 4 Rated current (1) [A] 32 Connection technology (1) CAGE CLAMP® Ladder type 1 solid + stranded Cross section from 0.2 mm² / 24AWG Cross section until 4 mm² / 12 AWG Ladder type 2 finely stranded Cross section from 0.14 mm² / 24 AWG Cross section until 4 mm² /12 AWG Stripping length from 11 mm Wiring type Side wiring Flammability class according to UL 94 V2 Weight [g] 2,5 Width 13.1 mm Height 8.3 mm Depth 18.6 mm

Product number: W221-2

€0.49*

Schuko connection cable, 3-wire, 150cm, black

For all larger power supplies with protective contact leads, such as the entire Meanwell HLG series. Straight grounding plug (CEE 7/4) and open end with wire end ferrules. Notice: The connection of 230V supply lines must never be carried out under current and must be carried out by a qualified electrician. There is a danger to life here!

Product number: K12

€5.30*