Light cove ORAC C394 - 2m

2m LED-Micro-profile PL1

The LED micro profile PL1 looks very inconspicuous due to its particularly narrow and flat design. It is mainly used indoors. The groove of the profile can hold up to 12 mm wide LED strips. In addition, this aluminum profile provides improved heat dissipation from the LED strips, which increases their service life. Technical data: Width: 16.8 mm Height: 6 mm Length: 2 m Width inside for LED strips: 12.4 mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: AL21bund

€15.40*

Details

24mm LED surface mount profile PN6

The PN6 LED surface-mounted profile is a larger profile and is designed for LED strips with a maximum width of 24 mm (including 2 adjacent strips). It is mainly used indoors (also as a stand-alone LED pendant luminaire with wire suspension or as a fixed LED luminaire with mounting springs).Technical data: Width: 33.6 mm Height: 26 mmLength: 2 m Width inside for LED strips: max. 20 mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: AL20bund

€36.70*

Details

2m LED insert profile PN5

The PN5 LED recessed profile has a narrow design and is designed for LED flex strips with a maximum width of 24 mm.Technical data:Width: 33.6 mm (insert: 26.8mm) ´Height: 11.7mm Length: 2m Width inside for LED strips: max. 24mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: Al38bund

€28.80*

Details

DECOFIX PRO - 310ML

DecoFix glue & filler: Indoor application

DecoFix Pro is a strong, water-based acrylic adhesive for mounting ORAC profiles on a wall. Application: Interior - porous/absorbent and dry substrates. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 310ml

Product number: OD-FDP500

€8.90*

DECOFIX HYDRO - 290ML

DecoFix glue & filler: Outdoor application

DecoFix Hydro is an extra strong, MS polymer adhesive for mounting ORAC profiles on a wall or ceiling. Application: Exterior - Non-porous/absorbent substrate and for damp areas. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 290ml

Product number: OD-FDP700

Variants from €8.90*

€19.00*

DECOFIX ULTRA - 400ML

DecoFix glue & filler: Seams

DecoFix Ultra is a polyurethane-based adhesive, especially for the joints between 2 ORAC DECOR profiles, e.g. in corners or on sections longer than 2m. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 400ml

Product number: OD-FX400

Variants from €8.90*

€28.00*

5m silicone insert cover 10x10mm

The flexible silicone insert covers are ideal if LED lighting is to be integrated into grooves, e.g. in an acoustic panel. The LED strip is glued into the groove at the bottom (aluminum profiles should be used from 5W/m) and then the silicone insert cover is pressed into the groove from above.The flexible silicone means that curves are also possible and the opal structure of the cover effectively blends LED points (from 120 LEDs/m). The result is a uniform, homogeneous line of light.Please note that this concept is not suitable for high-power LED strips, as there is insufficient cooling effect. Only LED strips with max. 5W/m should be used without an aluminum profile. Slightly higher wattages are also possible with flat aluminum profiles. Technical data: Width: 15 mm Height: 10 mmRequired groove width: 9-10 mmRequired groove depth: min. 10 mm Max. width for LED strips: 10 mmWe recommend a pressure roller for gluing and lightly pressing on the LED strips.

Product number: EBC1010mas

Content: 5 Meter (€6.78* / 1 Meter)

€33.90*

Details

5m silicone insert cover 15x10mm

The flexible silicone insert covers are ideal if LED lighting is to be integrated into grooves, e.g. in an acoustic panel. The LED strip is glued into the groove at the bottom (aluminum profiles should be used from 5W/m) and then the silicone insert cover is pressed into the groove from above.The flexible silicone means that curves are also possible and the opal structure of the cover effectively blends LED points (from 120 LEDs/m). The result is a uniform, homogeneous line of light.Please note that this concept is not suitable for high-power LED strips, as there is insufficient cooling effect. Only LED strips with max. 5W/m should be used without an aluminum profile. Slightly higher wattages are also possible with flat aluminum profiles. Technical data: Width: 20 mm Height: 10 mmRequired groove width: 13-15 mmRequired groove depth: min. 10 mm Max. width for LED strips: 15 mmWe recommend a pressure roller for gluing and lightly pressing on the LED strips.

Product number: EBC1510mas

Content: 5 Meter (€7.78* / 1 Meter)

€38.90*

Details

10m LED tensioning system

The SP01 LED tensioning system allows LED light lines to be freely positioned in the room. This is made possible by 2 wall brackets, between which a 15 mm wide steel strip is stretched. This steel strip can then accommodate an LED strip and shine freely into the room, onto the ceiling or the wall. Direct and indirect lighting solutions with comparatively little installation effort are thus possible. Thanks to the ball joint in the wall brackets, angled lines with angles of 0 - 90° are also possible. The video in the video tab shows many examples. For installation, the supply cable for the LED strip is fed through the wall bracket, then the bracket is screwed on and tensioned. The LED strip is then fully bonded to the steel strip. The result is a filigree line of light without visible cable routing. Technical data: Max. Length: 10 m Wall bracket diameter: 90 mm Wall bracket structure: 113 - 143 mm Max. Width for LED strips: 15 mm

Product number: SP01mas

€225.00*

Details

2m LED floor profile B12

The B12 floor profile is suitable for installing LED light lines in the floor. Thanks to its sturdy construction and 1.5 mm thick opal cover, it is tread-resistant and can also be rolled over. The thick opal cover also ensures good mixing of the LEDs, so that absolutely homogeneous light lines are created from an LED density of 120 LEDs/m. The B12 floor profile is always supplied with an opal cover. Technical data: Width: 16 mm Length: 2 m Height: 12.7 mm (incl. opal cover)Internal width for LED strips: 13.2 mm Note: The B12 floor profile offers a contact surface of 13.2 mm. However, please note the upper narrowing caused by the support surface for the opal cover. This narrowing is only 10mm wide, which must be taken into account when gluing in the LED strips from above. A typical 12mm wide LED strip can be easily inserted at an angle, but if it is an LED strip in a 12mm wide IP67 silicone tube, it can only be inserted from the side. We recommend a pressure roller for gluing in and lightly pressing on the LED strips.

Product number: Al66si2

€13.50*

2m LED-Micro-profile PL1

The LED micro profile PL1 looks very inconspicuous due to its particularly narrow and flat design. It is mainly used indoors. The groove of the profile can hold up to 12 mm wide LED strips. In addition, this aluminum profile provides improved heat dissipation from the LED strips, which increases their service life. Technical data: Width: 16.8 mm Height: 6 mm Length: 2 m Width inside for LED strips: 12.4 mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: AL21bund

€15.40*

Details

24mm LED surface mount profile PN6

The PN6 LED surface-mounted profile is a larger profile and is designed for LED strips with a maximum width of 24 mm (including 2 adjacent strips). It is mainly used indoors (also as a stand-alone LED pendant luminaire with wire suspension or as a fixed LED luminaire with mounting springs).Technical data: Width: 33.6 mm Height: 26 mmLength: 2 m Width inside for LED strips: max. 20 mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: AL20bund

€36.70*

Details

2m LED insert profile PN5

The PN5 LED recessed profile has a narrow design and is designed for LED flex strips with a maximum width of 24 mm.Technical data:Width: 33.6 mm (insert: 26.8mm) ´Height: 11.7mm Length: 2m Width inside for LED strips: max. 24mm Other mounting options and accessories for line lights If you want to realize long line lights, pendant lights or a hidden cable routing with this profile, choose the matching mounting rail PL10 with corresponding accessories. The mounting rail is available in silver, black & white. Further are available: Rail connectors straight and angled Cable suspensions Mounting springs for fastening in drywall

Product number: Al38bund

€28.80*

Details

DECOFIX PRO - 310ML

DecoFix glue & filler: Indoor application

DecoFix Pro is a strong, water-based acrylic adhesive for mounting ORAC profiles on a wall. Application: Interior - porous/absorbent and dry substrates. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 310ml

Product number: OD-FDP500

€8.90*

DECOFIX HYDRO - 290ML

DecoFix glue & filler: Outdoor application

DecoFix Hydro is an extra strong, MS polymer adhesive for mounting ORAC profiles on a wall or ceiling. Application: Exterior - Non-porous/absorbent substrate and for damp areas. 1 cartridge is sufficient for approx. 6m ORAC DECOR profile. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 290ml

Product number: OD-FDP700

Variants from €8.90*

€19.00*

DECOFIX ULTRA - 400ML

DecoFix glue & filler: Seams

DecoFix Ultra is a polyurethane-based adhesive, especially for the joints between 2 ORAC DECOR profiles, e.g. in corners or on sections longer than 2m. You can use ORACDECOR's adhesive calculator to determine exactly how much adhesive you need: https://www.oracdecor.com/de_de/kleberrechner You can find more installation tips here: https://www.oracdecor.com/de_de/faq#installation Technical data: Content: 400ml

Product number: OD-FX400

Variants from €8.90*

€28.00*