LED bar feed cable 50cm, open ends
€1.52*
% €1.90* (20% saved) previously €1.90*Available, delivery time: 3-5 days
Product number:
LB-PL02-L50W
Available stock:
2
With these cables you establish the power supply for your LED bar system and thus the connection to an external power supply.
Input: Open ends (+/-) e.g. for direct connection to a power supply with screw terminals.
Output: LED-Bar connector
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de
Skip product gallery
Accessory items
Slimline power supply 24V - 2.5A - 60 Watt
€34.50*
Snappy Slimline Switching Power Supply SNP60-24VF-1
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
Certifications: UL, CB, CE
The Slimline series of power supplies are ideal for installation in furniture and lighting fixtures, or generally anywhere other power supplies cannot fit.
Technical data:
Model
SNP60-24VF-1
Voltage
24V
Maximum power
60W
Current
2.5A
Output voltage
24 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
305x30x17mm (LxWxH)
Weight
220g
Product number:
LED1154
Radio dimmer LK55-2 | 1 x 8A
€36.00*
The 1 x 8 amp driver offers only one output and is therefore only suitable as a dimmer. Due to the 8 amps, however, very powerful LED components can be connected. At 24 volts, for example, LED components up to 170 watts are possible. The driver is installed between the power supply and the LED component.
It is ideally suited for small and medium installations, as well as a supplement for larger installations. The driver belongs to the LK55 series and can be combined with all dimmer remote controls available there.
NOTES:
All drivers of our LK55 series remember the last setting even in case of power loss.
RGBW and CCT color temperature remote controllers have no function on the LK55-2 LED dimmer.
Technical data:
Voltage: 12V-48V DCPower: Power connection via external switching power supply (not included)Load: 1 x 8A (1 x 4A at 48V DC)Min. dim level: <1% (for RGB/W <3%)Connection: input: V+/ground, push button; output: V+/groundIP class: IP 20
Dimensions: LxWxH 95x37x20mm
Operation via pushbutton input
The LK55-2 offers 2 green screw terminals on the back for a button input. For example, a simple pushbutton can be connected to this and thus control the light without radio. Short keystroke switches the LEDs on and off. Long keystroke dims the LEDs up and down. Instead of a pushbutton, in principle only 2 cables can be connected, which are then held together short or long.
Video tutorial for dimming via radio
Video tutorial for dimming via cable with PUSH DIM
Product number:
LK55-2