Multi LED driver for DALI, 1-10V, PushDim & PhaseCut | 2 x 10A

€69.00*

Available, delivery time: 3-5 days

Product number: LK145

Available stock: 54

Multifunctional LED controller with 2 x 10A output power for various control types:

DALI DT6 (1 address)
0/1-10V
PushDim (230V)
230V PhaseCut (TRIAC)

This means that the controller can be used in a wide variety of setups and, for example, integrate an installation with LED strips into existing control concepts. With an output power of 2 x 10 amps, it is also well equipped for large LED installations.

Wiring examples

0/1-10V

DALI

230V PushDim

230V PhaseCut

Scope of delivery:

1 x driver LK145

Technical data

Outputs: 2
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 10A per output
Input: (V+/ground, PhaseCut, DALI in / PushDim, 0/1-10V)
Output: (2 x LED)
IP class: IP 20
Ambient temperature: -20°C - +50°C
Dimensions: LxBxH 170x54x28mm

Note: The controller has double voltage inputs (++--). If the connected load is high (> 200 watts), use our special Y connection cables to split the current load between both inputs. The two large power supply units HLG-480 and HLG-600 already have dual voltage outputs so that both voltage inputs of the controller can be used directly.

Dimensional drawings:

LK124 DALI DT8 Abmessungen

Manufacturer

LED-Studien GmbH

Mühlenweg 15

04451 Panitzsch

^{info@led-studien.de}

Recommended accessories

DALI pushbutton control for up to 4 pushbuttons

Driver version: Master Control

DALI push-button module for controlling up to 4 DALI luminaires via 4 push-buttons. The compact push-button module fits into the flush-mounted box and can be controlled with up to 4 push-buttons. The two rotary switches can be used to set the start address to be controlled, which is then controlled via push-button K1. Push-button K2 controls start address + 1, K3 start address + 2 and K4 start address +3. A short press on the push-button switches the respective channel on or off alternately, a long press dims up or down. Installation: Technical data: Dimensions: Connections:

Product number: LK110

Variants from €55.00*

€69.00*

DALI wall-mounted touch interface | 4 zones

Driver version: Wall switch

Remote control for wall mounting for use with the 4-channel DALI LED controller LK90 from our program. The individual zones can be switched on/off and dimmed via the buttons. Scope of delivery: 1x wall remote control DALI LK88 Technical data: Dimensions: LxWxH 86x86x41mm

Product number: LK88

€55.00*

DALI bus power supply

Power supply for the DALI bus. Input voltage range: 100-240VAC Output: 16VDC, max. 250mA Installation: Technical data: Dimensions:

Product number: LK109

€79.00*

Repeater

LED Repeater / Amplifier | 4 x 6A

This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each. Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater. Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters. Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.

Product number: LK51

€35.00*