LED-Strip 2016 ww 2500K, 800lm/m, only 4mm wide!

LED-Studien GmbH

€65.00*

Content: 5 Meter (€13.00* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Product number: LK04-7c-25

Available stock: 5

LED type: 2016
120 LED/m
Colour rendering: CRI>90
Brightness: 800lm/m
Voltage: 24 Volt
Power: 9,6Watt/m
Width: 4mm

Price for 1 roll = 5 meters

The narrowest LED strip in our range. Specially designed for applications where there is no room for conventional LED strips. E.g. in very narrow joints, cracks or for use in very flat edge-light solutions, etc.

Available variants

5m roll IP20 without water protection, incl. 10cm connection cable

All versions have a 3M adhesive tape on the back for mounting and are divisible every 5 cm.

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.

https://shop.led-studien.de/de/zubehor/netzteile/24v-netzteile

For brightness controll of 5m a controller with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere.

https://shop.led-studien.de/de/controller/dimmer-1-2-kanal

Answers to frequently asked questions can be found in our FAQ.

Properties "LED-Strip 2016 ww 2500K, 800lm/m, only 4mm wide!"

Brightness lm/m:	800
Colour rendering:	CRI>90
Energy efficiency class (EEK):	F
Power:	10
Seperatable every (cm):	5,0 cm
Strip width in mm:	4
Voltage:	24V
Water protection:	IP20 without waterprotection
LED/m:	120

Data according to manufacturer. Errors and changes reserved.

Manufacturer

LED-Studien GmbH

Mühlenweg 15

04451 Panitzsch

^{info@led-studien.de}

datasheet

Suitable Accessories

Inline dimmer 12-48V | 1x20A

This inline LED dimmer can be easily connected between the power supply unit and LED strips and allows convenient dimming via a rotary potentiometer. In the end position, the LEDs are completely switched off.The dimmer can control LED components such as LED strips from 12 - 48V. It also allows dimming of the new 48V LED strips for particularly long installation lengths.The PWM frequency can be set in 4 steps between 500Hz, 2KHz, 8 KHz and 16 KHz via DIP switches. With 8 and especially 16 KHz, the dimmer is also ideally suited for flicker-free video recordings, for example. A further DIP switch allows you to switch between linear and logarithmic (gamma 1.6) dimming behavior.Depending on the choice of PWM frequency and voltage range, the controller can process different currents between 8A (16KHz PWM, 48V) and 20A (500Hz PWM, 24V). More detailed information can be found directly on the housing.A small display shows the set dim value. This can also be used to set the fade on/off time to 0.5 or 3s. If required, an additional RF remote control (see recommended accessories) can be linked to the dimmer. Technical data: Dimensions (LxWxH): 117 x 75 x 20mm (+ 13mm potentiometer)Voltage range: 12 - 48VDCMax. Current: See housing imprintPWM frequency: 0.5 - 16 KHzShort-circuit and overload protection

Product number: LK146-1

€42.00*

PushDim LED dimmer 12-48V | 1x15A

This PushDim LED dimmer can be easily connected between the power supply unit and LED strips and allows convenient dimming via PushDim, e.g. an usual pushbutton. In the end position, the LEDs are completely switched off.The dimmer can control LED components such as LED strips from 12 - 48V. It also allows dimming of the new 48V LED strips for particularly long installation lengths.The PWM frequency can be set in 4 steps between 500Hz, 2KHz, 8 KHz and 16 KHz via DIP switches. With 8 and especially 16 KHz, the dimmer is also ideally suited for flicker-free video recordings, for example. A further DIP switch allows you to switch between linear and logarithmic (gamma 1.6) dimming behavior.Depending on the choice of PWM frequency and voltage range, the controller can process different currents between 6A (16KHz PWM, 48V) and 15A (500Hz PWM, 24V). More detailed information can be found directly on the housing.A small button allows to change the fade on/off time to 0.5 or 3s. If required, an additional RF remote control (see recommended accessories) can be linked to the dimmer. Technical data: Dimensions (LxWxH): 175 x 46 x 27mmVoltage range: 12 - 48VDCMax. Current: See housing imprintPWM frequency: 0.5 - 16 KHzShort-circuit and overload protection

Product number: LK146-2

€42.00*

Handheld remote for LK146 dimmers

RF hand-held remote control for the LK146 dimmer. 1 zone, 2 memory locations.Incl. wall bracket. Technical data: Dimensions (LxWxH): 134 x 40 x 11mmRange: up to 30m in free fieldPower supply via CR2032 button cell

Product number: LK146FBmas

€22.00*

Details

Mini LED dimmer for aluminium profiles - Wipe sensor | 12-24V | 1x3A

This mini LED dimmer is only 10mm wide and can be installed directly in an aluminium profile, for example. It works with a wipe sensor so that the light can be switched and even dimmed with a simple hand movement at a short distance (max. 4cm) from the sensor.If you wipe your hand past the sensor, the light is switched on. If you hold your hand in front of the sensor, the light is dimmed up and down. Always in alternation. No profile cover must be installed above the wipe sensor. If necessary, drill a sufficiently large hole in the cover so that the wipe sensor can work properly. Attention! The mini LED dimmer with wipe sensor does NOT remember the last dim setting in case of power loss. Dimensions: approx. L45 x W10 x H8mm

Product number: LK138w

€14.50*

Mini LED dimmer for aluminium profiles - Touch | 12-24V | 1x3A

This mini LED dimmer is only 10mm wide and can be installed, for example, directly with in an aluminum profile. At the point where the spring of the dimmer touches the profile cover, the light can be switched and dimmed by touching the cover with your finger. A short touch switches the LED light on and off. A long touch dims the LED light up and down - always alternating. The spring reacts sensitively even through the cover. A small LED inside the spring marks the appropriate place for the touch well, even with opal covers. The mini LED dimmer remembers the last dim setting even when power is lost, so you can combine it with a normal on/off switch. Dimensions: approx. L50 x W8 x H10mm Usable for profiles with an inner height (distance to cover) of min. 5 - max. 10mm.

Product number: LK138t

€14.90*

Controller lk82mini-led-controllerinline

Mini LED dimmer inline 12-24V | 1x4A

This mini LED dimmer can be easily connected between power supply and LED strip and allows convenient dimming via a large rotary potentiometer. In the final position the LEDs are completely switched off. Dimensions: approx. 70 x 35 x 35mm (plus cable)Voltage: 12 - 24VDC PWM frequency: approx. 1,200 Hz Scope of delivery: 1x Mini dimmer LK82

Product number: LK82

€7.50*