LED-Spots

LED spots are ideal for setting lighting accents. They are a perfect complement to soft, indirect room lighting with LED strips, for example. Highlight individual areas with LED spots, illuminate pictures, individual pieces of furniture or other objects in the room very specifically. Therefore, in addition to the 10° beam angle offered here, our LED spots are also available with 36° medium beam angle. We also offer various recessed housings in which the spots can be rotated and pivoted, so that you can direct the light in any desired direction. Of course, you can also use MR16 housings from other suppliers. We focus our offer on LED spotlights of the highest quality with excellent color rendering CRI>95, which guarantees perfect light quality, absolutely natural colors and the highest quality workmanship. The 230V spots are tested with our 230V dimmers from the LK55 series (radio) and LK115-series (ZigBee) and achieve excellent dim behavior here. Full spectrum light, color rendering CRI>95 Point light source with single shadow; as with halogen Color temperature warm white 2,700 & 3,000K (neutral white 4,000K on request) 10° Super Spot and 36° Mid beam angle (other options on request) Aluminium Gehäuse Lifetime (L70): 30,000h   100,000 Switching cycles standardized MR16 design - fits into many installation housings   Technical data:  Item no. SPI36-2700  Color temperature 2700K  Beam angle 36°  Color rendering CRI 98  Brightness 560 Lumen  Light intensity 1,821 Candela  Voltage 220 - 240VAC  Power consumption 8 W  Base GU10  Dimensions 50mm x 58mm  Protection class IP20  Energy efficiency class F  

LED spots are ideal for setting lighting accents. They are a perfect complement to soft, indirect room lighting with LED strips, for example. Highlight individual areas with LED spots, illuminate pictures, individual pieces of furniture or other objects in the room very specifically. Therefore, in addition to the 10° beam angle offered here, our LED spots are also available with 36° medium beam angle. We also offer various recessed housings in which the spots can be rotated and pivoted, so that you can direct the light in any desired direction. Of course, you can also use MR16 housings from other suppliers. We focus our offer on LED spotlights of the highest quality with excellent color rendering CRI>95, which guarantees perfect light quality, absolutely natural colors and the highest quality workmanship. Die 230V Spots sind mit unseren 230V-Dimmern aus der  (Funk) und  (ZigBee) getestet und erreichen hier ein exzellentes Dim-Verhalten.The 230V spots are tested with our 230V dimmers from the LK55 series (radio) and LK115-series (ZigBee) and achieve excellent dim behavior here. Full spectrum light, color rendering CRI>95 Point light source with single shadow; as with halogen Color temperature warm white 2,700 & 3,000K (neutral white 4,000K on request) 10° Super Spot and 36° Mid beam angle (other options on request) Aluminium Gehäuse Lifetime (L70): 30,000h   100,000 Switching cycles standardized MR16 design - fits into many installation housings   Technical data:  Item no. SPI10-3000  Color temperature 3000K  Beam angle 10°  Color rendering CRI 95  Brightness 410 Lumen  Light intensity 17.148 Candela  Voltage 220 - 240VAC  Power consumption 8 W  Base GU10  Dimensions 50mm x 58mm  Protection class IP20  Energy efficiency class G  

LED spots are ideal for setting lighting accents. They are a perfect complement to soft, indirect room lighting with LED strips, for example. Highlight individual areas with LED spots, illuminate pictures, individual pieces of furniture or other objects in the room very specifically. Therefore, in addition to the 10° beam angle offered here, our LED spots are also available with 36° medium beam angle. We also offer various recessed housings in which the spots can be rotated and pivoted, so that you can direct the light in any desired direction. Of course, you can also use MR16 housings from other suppliers. We focus our offer on LED spots of the highest quality from the premium manufacturer SORAA and work here exclusively with the high-end line SORAA VIVID. This guarantees a perfect light quality, absolutely natural colors and the highest quality workmanship. The characteristic values of the SORAA VIVID spots speak for a light quality that is second to none: Full spectrum light, color rendering CRI-95 Color rendering R9-95 Point light source with single shadow; as with halogen Color temperature warm white 2,700 & 3,000K (neutral white 4,000K on request) 10° Super Spot, 25° Spot and 36° Mid beam angle (other options on request) Flicker index: only 0.02 Lifetime (L70): 35,000h standardized MR16 design - fits into many installation housings The excellent SORAA VIVID light spectrum with CRI95

LED spots are ideal for setting lighting accents. They are a perfect complement to soft, indirect room lighting with LED strips, for example. Highlight individual areas with LED spots, illuminate pictures, individual pieces of furniture or other objects in the room very specifically. Therefore, in addition to the 10° beam angle offered here, our LED spots are also available with 36° medium beam angle. We also offer various recessed housings in which the spots can be rotated and pivoted, so that you can direct the light in any desired direction. Of course, you can also use MR16 housings from other suppliers. We focus our offer on LED spots of the highest quality from the premium manufacturer SORAA and work here exclusively with the high-end line SORAA VIVID. This guarantees a perfect light quality, absolutely natural colors and the highest quality workmanship. The characteristic values of the SORAA VIVID spots speak for a light quality that is second to none: Full spectrum light, color rendering CRI-95 Color rendering R9-95 Point light source with single shadow; as with halogen Color temperature warm white 2,700 & 3,000K (neutral white 4,000K on request) 10° Super Spot and 36° Mid beam angle (other options on request) Flicker index: only 0.02 Lifetime (L70): 35,000h standardized MR16 design - fits into many installation housings   The excellent SORAA VIVID light spectrum with CRI95

LED spots are ideal for setting lighting accents. They are a perfect complement to soft, indirect room lighting with LED strips, for example. Highlight individual areas with LED spots, illuminate pictures, individual pieces of furniture or other objects in the room very specifically. Therefore, in addition to the 10° beam angle offered here, our LED spots are also available with 36° medium beam angle. We also offer various recessed housings in which the spots can be rotated and pivoted, so that you can direct the light in any desired direction. Of course, you can also use MR16 housings from other suppliers. We focus our offer on LED spots of the highest quality from the premium manufacturer SORAA and work here exclusively with the high-end line SORAA VIVID. This guarantees a perfect light quality, absolutely natural colors and the highest quality workmanship. The characteristic values of the SORAA VIVID spots speak for a light quality that is second to none: Full spectrum light, color rendering CRI-95 Color rendering R9-95 Point light source with single shadow; as with halogen Color temperature warm white 2,700 & 3,000K (neutral white 4,000K on request) 10° Super Spot and 36° Mid beam angle (other options on request) Flicker index: only 0.02 Lifetime (L70): 35,000h standardized MR16 design - fits into many installation housings The excellent SORAA VIVID light spectrum with CRI95

The round recessed housing for MR16 spots is made of steel and painted white glossy. The pull-out spring ring allows a quick change of suitable MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC. It has been designed as a recessed ceiling housing for indoor use. The spots can be swivelled approx. 45° - depending on the installation conditions.  The installation is done by ceiling mounting. Thereby the ceiling cutout should be 70mm   Technical data:  Item-Nr. SPG-Vw  Color glossy white  Material steel  Dimensions D90xH27mm  Protection class IP20  Pivotable 45°  Ceiling cut out 70mm

The round recessed housing for MR16 spots is made of steel and painted black glossy. The pull-out spring ring allows a quick change of suitable MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC. It has been designed as a recessed ceiling housing for indoor use. The spots can be swivelled approx. 45° - depending on the installation conditions.  The installation is done by ceiling mounting. Thereby the ceiling cutout should be 70mm   Technical data:  Item-Nr. SPG-Vs  Color glossy black  Material steel  Dimensions D90xH27mm  Protection class IP20  Pivotable 45°  Ceiling cut out 70mm

The round recessed housing for MR16 spots is made of die-cast aluminum and powder coated white matt. From behind, typical MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC - are held in place with a spring ring.It is designed as a recessed ceiling housing for indoor use. The spots can be swivelled by approx. 45° - depending on the installation situation. The spots lie elegantly slightly recessed in the housing (see pictures). The installation is done by ceiling mounting. The ceiling cut-out should be 75mm.     Technical data:  Item-Nr. SPG-Rw  Color matt white  Material die-cast aluminium  Dimensions D95xH30mm  Protection class IP20  Pivotable 45°  Ceiling cut out 75mm

The round recessed housing for MR16 spots is made of die-cast aluminum and powder coated black matt. From behind, typical MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC - are held in place with a spring ring.It is designed as a recessed ceiling housing for indoor use. The spots can be swivelled by approx. 45° - depending on the installation situation. The spots lie elegantly slightly recessed in the housing (see pictures). The installation is done by ceiling mounting. The ceiling cut-out should be 75mm.     Technical data:  Item-Nr. SPG-Rs  Color matt black  Material die-cast aluminium  Dimensions D95xH30mm  Protection class IP20  Pivotable 45°  Ceiling cut out 75mm

The squared recessed housing for MR16 spots is made of die-cast aluminum and powder coated white matt. From behind, typical MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC - are held in place with a spring ring.It is designed as a recessed ceiling housing for indoor use. The spots can be swivelled by approx. 45° - depending on the installation situation. The spots lie elegantly slightly recessed in the housing (see pictures). The installation is done by ceiling mounting. The ceiling cut-out should be 75mm.     Technical data:  Item-Nr. SPG-Tw  Color matt white  Material die-cast aluminium  Dimensions W90xH28mm  Protection class IP20  Pivotable 45°  Ceiling cut out 75mm

The squared recessed housing for MR16 spots is made of die-cast aluminum and powder coated white black. From behind, typical MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC - are held in place with a spring ring.It is designed as a recessed ceiling housing for indoor use. The spots can be swivelled by approx. 45° - depending on the installation situation. The spots lie elegantly slightly recessed in the housing (see pictures). The installation is done by ceiling mounting. The ceiling cut-out should be 75mm.     Technical data:  Item-Nr. SPG-Ts  Color matt black  Material die-cast aluminium  Dimensions W90xH28mm  Protection class IP20  Pivotable 45°  Ceiling cut out 75mm

The round recessed housing for MR16 spots is made of brushed aluminum. The outer ring is matte, the inner, swiveling more shiny. The pull-out spring ring allows a quick change of the matching MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC. It is designed as a recessed ceiling housing for indoor use. The spots can be swivelled by approx. 45° - depending on the installation situation. The installation is done by ceiling mounting. The ceiling cut-out should be 70mm.   Technical data:  Item-Nr. SPG-Mg  Color aluminium, silver  Material brushed aluminium  Dimensions D90xH22mm  Protection class IP20  Pivotable 45°  Ceiling cut out 70mm

The squared recessed housing for MR16 spots is made of brushed aluminum. The outer part is matte, the inner, swiveling more shiny. The pull-out spring ring allows a quick change of the matching MR16 spots - e.g. GU10 with 230VAC or G5.3 with 12VDC. It is designed as a recessed ceiling housing for indoor use. The spots can be swivelled by approx. 45° - depending on the installation situation. The installation is done by ceiling mounting. The ceiling cut-out should be 70mm.   Technical data:  Item-Nr. SPG-Gg  Color aluminium, silver  Material brushed aluminium  Dimensions W93xH22mm  Protection class IP20  Pivotable 45°  Ceiling cut out 70mm

The recessed housing MR16 aluminum white, square is made of high quality aluminum including GU5.3 socket. The pull-out inner ring allows a quick change of suitable MR16 LED spots. The recessed housing has been designed as a recessed ceiling housing for indoor use. The luminaire can be tilted 45° and rotated 360°. It is ideal for the use of accent, as well as general lighting. The installation is done by ceiling mounting. In this case, the ceiling cutout should be 70mm.   Technical data:  Item no. SPG-AL-Q  Color white  Material Aluminum  Socket GU5,3  Dimensions L92xW92xH30mm  Protection IP20  Swiveling 45°  Rotatable 360°  Weight 171g  Ceiling cutout 70mm  Installation depth n.a.mm  Rated power light source 1x max. 50W  Rated voltage light source 12VC/DC  

Professional 3D light simulation of your room Detailed result with brightness values and light distribution in the room E.g. for indirect lighting, solutions with LED profiles or lighting with LED spots You will receive results by e-mail within 5 working days With most lighting solutions in private or commercial rooms, a certain brightness is to be achieved. Especially when it comes to a room's main lighting. A simple light simulation can answer the following questions: What brightness can I expect if I use components xy? How uniform will the light distribution be in the room? Do I have to use brighter LED strips / LED spots to achieve my goal? The result of the light simulation shows the light distribution in the room in a clear graphic. You can immediately see which brightnesses are to be expected and where something should be adjusted if necessary. In order for the light simulation to provide the most precise results, the following information is required: Floor plan of the room with all dimensions (clearly legible!) Ceiling height of the room (ridge and knee height if applicable, if there are sloping roofs) Wall and ceiling colours or wall and ceiling design of the room, so that we can estimate the reflective properties of these surfaces. Detailed drawings of any coving, ceiling suspensions or stucco mouldings that have already been planned, including dimensions. Photos, if necessary, so that we can better assess the project. After ordering the light simulation, you will receive a personal e-mail from us to which you can send all the necessary data. You will receive the results of the light simulation by e-mail after 5 working days at the latest.   You can also find more information on our topic page:  https://indirekte-beleuchtung.com/professionelle-lichtplanung/

You receive a spectral measurement and evaluation of an LED strip or an LED module. One LED each is measured at 3 different points from a roll purchased in the shop. The measurement protocol as PDF contains: 3 x spectrum from 340-750nm3 x colour temperature3 x colour location in the CIE1931 diagram3 x colour rendering index (CRI) as well as the values of all test colours. This is particularly useful for projects where absolute accuracy in light colour is important. This gives you a very precise, professional indication of the colour parameters of the LEDs. For later re-orders, for example, you can compare how well the batches match.