LED Neonflex

LED Neonflex continuous rows where no individual LEDs are visible.

Variants:

Warmwhite, neutral white, cool white
RGB(W)
Digital pixel Neonflex

Pay attention to the respective bending options!

horizontal (e.g. for lettering, logos etc.)

vertical (e.g. for edge lighting)

NEONFLEX LED Band - 12W/m - 6mm wide - HORIZONTAL bendable

Product number: LK04-30mas

Content: 5 Meter (€17.00 / 1 Meter)

€85.00

Details

FreeCut NEONFLEX LED Band - 10W/m - 12mm wide - VERTICAL bendable

Product number: LK04-43dmas

Content: 5 Meter (€17.00 / 1 Meter)

€85.00

Details

RGB NEONFLEX Band - 17W/m - 10mm wide - HORIZONTAL bendable

Product number: LK04-33mas

Content: 5 Meter (€23.80 / 1 Meter)

From €119.00

Details

RGBW NEONFLEX Band - 26W/m - 12mm wide - HORIZONTAL bendable

Product number: LK04-33-2

Content: 5 Meter (€25.00 / 1 Meter)

€125.00

RGBW NEONFLEX LED Band - 26W/m - 16mm wide - VERTICAL bendable

Product number: LK04-38-2

Content: 5 Meter (€23.80 / 1 Meter)

€119.00

Digital RGB NEONFLEX - 12V - 60 Pixel/m - HORIZONTAL bendable

Product number: LK117-72

Content: 5 Meter (€25.00 / 1 Meter)

€125.00

5m silicone insert cover 10x10mm

Product number: EBC1010mas

Content: 5 Meter (€6.78 / 1 Meter)

€33.90

Details

5m silicone insert cover 15x10mm

Product number: EBC1510mas

Content: 5 Meter (€7.78 / 1 Meter)

€38.90

Details

LED Neonflex strips are preassembled LED light tubes in which no individual LEDs are visible. The result is a continuous, homogeneous strip of light which can of course also bei laid in curves and bends. This makes the LED Neonflex particularl suitable for decorative and effect applications, e.g.:

Light accents on (curved) edges
Facade lighting, room accentuation
Lettering with LED Neonflex
Logo design and graphic representations

The homogeneity of LED Neonflex is achieved by a milky opal silicone cover that completely surrounds the tape. This silicone cover also makes the tape waterproof and therefore suitable for outdoor use and generally damp environments. LED Neonflex tapes can be easily cut at regular intervals like normal LED strips. Corresponding cutting markings are printed on the bottom or side of the strip. If the water protection is to be retained, the cut end can be sealed again afterwards with a small cap and silicone. Most Neonflex tapes are supplied with the appropriate material.

Bending options for Neonflex strips

There are 2 different orientations in which tapes can be bent:

horizontal (e.g. for lettering, logos etc.)
Vertical (for curved edges, etc.)

When selecting Neonflex tapes, always make sure you choose the right bending option for your project!

Filter products

LED Neonflex

Bending options for Neonflex strips