24V power supplies
- Ultra compact slimline power supplies, e.g. for installation in furniture or in narrow coves
- HLG power supplies with the highest quality components and extremely quiet operation even with downstream PWM dimmers
- Inexpensive plug-in power supplies for smaller LED applications
- PWM power supplies for direct dimming of LEDs via PWM
Slimline power supply 24V - 2.5A - 60 Watt
€34.50*
Snappy Slimline Switching Power Supply SNP60-24VF-1
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
Certifications: UL, CB, CE
The Slimline series of power supplies are ideal for installation in furniture and lighting fixtures, or generally anywhere other power supplies cannot fit.
Technical data:
Model
SNP60-24VF-1
Voltage
24V
Maximum power
60W
Current
2.5A
Output voltage
24 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
305x30x17mm (LxWxH)
Weight
220g
Product number:
LED1154
Slimline power supply 24V - 3.2A - 75 Watt
€38.00*
Snappy Slimline Switching Power Supply SL75-24VF
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
Certifications: UL, CB, CE
The slimline power supplies of the Slimline series are ideally suited for installation in furniture and luminaires or generally wherever other power supplies cannot find a place.
Technical data:
Model
SNP74-24VF
Voltage
24V
Maximum power
75W
Current
3,13A
Output voltage
24 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
305x30x17mm (LxWxH)
Weight
200g
Product number:
LED1150
Slimline power supply 24V - 4.2A - 100 Watt
€46.00*
Snappy Slimline Switching Power Supply SNP100-24VF-1
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
Certifications: UL, CB, CE
The slimline power supplies of the Slimline series are ideally suited for installation in furniture and luminaires or generally wherever other power supplies cannot find a place.
Technical data:
Model
SNP100-24VF-1
Voltage
24V
Maximum power
100W
Current
4.16A
Output voltage
24 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
320x30x18mm (LxWxH)
Weight
230g
Product number:
LED1152
Slimline Netzteil 24V - 6.3A - 150 Watt
€63.00*
Snappy Slimline Switching Power Supply SNP150-24VF-1
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
max. operating temperature: +45°C
dimension: 323 x 30 x 22mm
Weight: 280g
Certifications: UL, CB, CE
The slimline power supplies of the Slimline series are ideally suited for installation in furniture and luminaires or generally wherever other power supplies cannot find a place.
Technical data:
Model
SNP150-24VF-1
Voltage
24V
Maximum power
150W
Current
6.25A
Output voltage
24 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
323x30x22mm (LxWxH)
Weight
240g
Product number:
LED1157
Slimline Netzteil 24V - 6.3A - 150 Watt
€89.00*
Snappy Slimline Switching Power Supply SL240-24VF
Universal input 200-240VAC, 50/60Hz, PF >=0.9
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage & too high temperature
with MM furniture mark for safe installation in furniture
IP20, not water protected
for LED and lighting applications
max. operating temperature: +45°C
dimension: 357 x 33 x 23mm
Weight: 400g
Certifications: UL, CB, CE
The slimline power supplies of the Slimline series are ideally suited for installation in furniture and luminaires or generally wherever other power supplies cannot find a place.
Technical data:
Model
SL240-24VF
Voltage
24V
Maximum power
240W
Current
610A
Output voltage
24 VDC
Voltage input
200...240V AC (50...60Hz)
Power factor
0,9
Working temperature
+45°C max.
Dimensions
357x33x23mm (LxWxH)
Weight
400g
Product number:
LED1172
Power supply HLG 24V - 2.5A - 60 Watt, extremely quiet
€44.00*
Switching power supply Meanwell HLG-60-24, 24 Volt, 2.5 Ampere, 60W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-60-24
Voltage
24V
Maximum power
60W
Current
2.5A
Adjustable voltage range
22 ~ 27V
Overcurrent protection
95...108%
Inrush current, max.
55A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+80°C
Dimensions
171x61.5x36.8mm (LxWxH)
Weight
730g
Product number:
LED1166
Power supply HLG 24V - 5.0A - 120 Watt, extremely quiet
€59.00*
Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-120-24
Voltage
24V
Maximum power
120W
Current
5A
Adjustable voltage range
22 ~ 27V
Overcurrent protection
95...108%
Inrush current, max.
65A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
2220x68x38.8mm (LxWxH)
Weight
1,120g
Product number:
LED1134
Power supply HLG 24V - 7.8A - 185 Watt, extremely quiet
€66.00*
Switching power supply Meanwell HLG-185-24, 24 Volt, 7.8 Ampere, 185W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-185-24
Voltage
24V
Maximum power
185W
Current
7.8A
Adjustable voltage range
22 ~ 27V
Overcurrent protection
95...108%
Inrush current, max.
65A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
2228x68x38.8mm (LxWxH)
Weight
1,150g
Product number:
LED1125
Power supply HLG 24V - 10A - 240 Watt, extremely quiet
€79.00*
Switching power supply Meanwell HLG-240-24, 24 Volt, 10 Ampere, 240W
overload protection by current limiting, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note on the connection of LED drivers
The HLG-240-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.
Technical data:
Model
HLG-240-24
Voltage
24V
Maximum power
240W
Current
10A
Adjustable voltage range
5 ~ 10V
Voltage input
230VAC
Overcurrent protection
95...108%
Inrush current, max.
75A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
244.2x68x38.8mm (LxWxH)
Weight
1,300g
Product number:
LED1122
Power supply HLG 24V - 13A - 320 Watt, extremely quiet
€99.00*
Switching power supply Meanwell HLG-320-24, 24 Volt, 13.3 Ampere, 320W - without fan!
overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note on the connection of LED drivers
The HLG-240-12 offers a lot of power and therefore a high current of up to 12.5 amps. If possible, use both voltage inputs on all drivers with dual voltage inputs (++--). All larger drivers usually have dual voltage inputs. It is best to order two 3-way WAGO distributors so that you can split the +/- output cables of the HLG-150 into 2 cables each, which you then run in parallel to the driver inputs. Alternatively, you can use a driver Y-connection cable in combination with luster terminals.
Technical data:
Model
HLG-320-24
Voltage
24V
Maximum power
320W
Current
13.3A
Adjustable voltage range
21 ~ 26V
Overcurrent protection
95...108%
Inrush current, max.
75A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,94
Working temperature
-40...+70°C
Dimensions
252x90x43.8mm (LxWxH)
Weight
1,880g
Product number:
LED1126
Power supply HLG 24V - 20A - 480 Watt, extremely silent
€155.00*
Switching power supply Meanwell HLG-480H-24A, 24 Volt, 20 Ampere, 480W - without fan!
overload protection by current limiting, auto recovery, protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note for the connection of LED drivers
If the driver has 2 parallel inputs (++--) please use both parallel voltage outputs of the power supply and connect them to the parallel inputs of the driver.
Technical data:
Model
HLG-480-24
Voltage
24V
Maximum power
480W
Current
20A
Adjustable voltage range
12 ~ 24V
Overcurrent protection
95...108%
Inrush current, max.
35A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,97
Working temperature
-40...+90°C
Dimensions
262x125x43.8mm (LxWxH)
Weight
2,800g
Product number:
LED1158
Power supply HLG 24V - 25A - 600 Watt, extremely quiet
€199.00*
Switching power supply Meanwell HLG-600-24, 24 Volt, 25 Ampere, 600W - without fan!
overload protection by current limiting, auto recovery, protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Note for connection of LED drivers
If the driver has 2 parallel inputs (++--) please use both parallel voltage outputs of the power supply and connect them to the parallel inputs of the driver.
Technical data:
Model
HLG-600-24
Voltage
24V
Maximum power
600W
Current
25A
Adjustable voltage range
12 ~ 24V
Overcurrent protection
95...108%
Inrush current, max.
70A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,93
Working temperature
-40...+70°C
Dimensions
280x144x48.5mm (LxWxH)
Weight
3,900g
Product number:
LED1155
Dimmable PWM switching power supply 24V - 1.7A - 40 Watt
€39.00*
Dimmable Meanwell switching power supply PWM-40-24, 24V / 1.7A / 40W
Meanwell's PWM dimmable power supplies are the only dimmable power supplies that LED Studies recommends for dimming LEDs. Unlike other dimmable power supplies that only control current, the PWM power supplies use the same technology as our LED drivers: positive width modulation (PWM).
The PWM-40-24 can dim all LED lighting with 24 volts and a maximum of 60 watts connected load comfortably from 0 - 100.
Dimming via: 0-10V, 100K potentiometer or PWM
PWM frequency at output: 1.47kHz
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage
IP67, for indoor and outdoor applicationsfor LED and lighting applications
Dimming via 1-10V
1-10V is a very simple system for remote control of lighting. The LED drivers can be connected to a standard 1-10V driver and controlled with it.
1-10V drivers are available e.g. from all known switch manufacturers (JUNG, GIRA, MERTEN, BUSCH JÄGER etc.) as a built-in module for the flush-mounted box. These modules only need to be connected to the driver via a 2-wire cable and the light can be controlled directly on the wall. As an example, a 1-10V driver for the flush-mounted box from GIRA:
The 1-10V control voltage is supplied by the driver. I.e. the 1-10V driver does not have to be connected to the mains here.
However, many drivers for the flush-mounted box can also switch 230V at the same time. This is usually done by pressing on the driver. Here, for example, the LED power supply can be switched via 230V and simultaneously dimmed via 1-10V on the LED driver with one and the same driver.
Technical data:
Model
PWM-40-24
Voltage
24V
Maximum power
40W
Current
3.34A
Overcurrent protection
110...150%
Inrush current, max.
50A
Voltage input
90...305V AC (47...63Hz)
Working temperature
-40...+70°C
Dimensions
150x53x35mm (LxWxH)
Weight
490g
Product number:
LED1163
Dimmable PWM switching power supply 24V - 2.5A - 60 Watt
€42.00*
Dimmable Meanwell switching power supply PWM-60-24, 24V / 2.5A / 60W
Meanwell's PWM dimmable power supplies are the only dimmable power supplies that LED Studies recommends for dimming LEDs. Unlike other dimmable power supplies that only control current, the PWM power supplies use the same technology as our LED drivers: positive width modulation (PWM).
The PWM-40-24 can dim all LED lighting with 24 volts and a maximum of 60 watts connected load comfortably from 0 - 100.
Dimming via: 0-10V, 100K potentiometer or PWM
PWM frequency at output: 1.47kHz
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage
IP67, for indoor and outdoor applicationsfor LED and lighting applications
Dimming via 1-10V
1-10V is a very simple system for remote control of lighting. The LED drivers can be connected to a standard 1-10V driver and controlled with it.
1-10V drivers are available e.g. from all known switch manufacturers (JUNG, GIRA, MERTEN, BUSCH JÄGER etc.) as a built-in module for the flush-mounted box. These modules only need to be connected to the driver via a 2-wire cable and the light can be controlled directly on the wall. As an example, a 1-10V driver for the flush-mounted box from GIRA:
The 1-10V control voltage is supplied by the driver. I.e. the 1-10V driver does not have to be connected to the mains here.
However, many drivers for the flush-mounted box can also switch 230V at the same time. This is usually done by pressing on the driver. Here, for example, the LED power supply can be switched via 230V and simultaneously dimmed via 1-10V on the LED driver with one and the same driver.
Technical data:
Model
PWM-60-24
Voltage
24V
Maximum power
60W
Current
2.5A
Inrush current, max.
50A
Dimensions
150x53x35mm (LxWxH)
Weight
490g
Product number:
LED1162
Dimmable PWM switching power supply 24V - 5A - 120 Watt
€69.00*
Dimable PWM Meanwell switching power supply PWM-120-24, 24V / 5A / 120W
Meanwell's PWM dimmable power supplies are the only dimmable power supplies that LED Studies recommends for dimming LEDs. Unlike other dimmable power supplies that only control current, the PWM power supplies use the same technology as our LED drivers: positive width modulation (PWM).
The PWM-40-24 can dim all LED lighting with 24 volts and a maximum of 60 watts connected load comfortably from 0 - 100.
Dimming via: 0-10V, 100K potentiometer or PWM
PWM frequency at output: 1.47kHz
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage
IP67, for indoor and outdoor applications
for LED and lighting applications
Dimming via 1-10V
1-10V is a very simple system for remote control of lighting. The LED drivers can be connected to a standard 1-10V driver and controlled with it.
1-10V drivers are available e.g. from all known switch manufacturers (JUNG, GIRA, MERTEN, BUSCH JÄGER etc.) as a built-in module for the flush-mounted box. These modules only need to be connected to the driver via a 2-wire cable and the light can be controlled directly on the wall. As an example, a 1-10V driver for the flush-mounted box from GIRA:
The 1-10V control voltage is supplied by the driver. I.e. the 1-10V driver does not have to be connected to the mains here.
However, many drivers for the flush-mounted box can also switch 230V at the same time. This is usually done by pressing on the driver. Here, for example, the LED power supply can be switched via 230V and simultaneously dimmed via 1-10V on the LED driver with one and the same driver.
Technical data:
Model
PWM-120-24
Voltage
24V
Maximum power
120W
Current
5A
Dimensions
191x63x37.5mm (LxWxH)
Weight
970g
Product number:
LED1145
Meanwell PWM power supply-200-24
€79.00*
Meanwell's PWM dimmable power supplies are the only dimmable power supplies that LED Studies recommends for dimming LEDs. Unlike other dimmable power supplies that only control current, the PWM power supplies use the same technology as our LED drivers: positive width modulation (PWM).
The PWM-200-24 can dim all LED lighting with 24 volts and maximum 200 watts connected load comfortably from 1 - 100%.
Dimming via: 0-10V, 100K potentiometer or PWM
PWM frequency at output: 1.47kHz
overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage
IP67, for indoor and outdoor applications
for LED and lighting applications
Dimming via 1-10V
1-10V is a very simple system for remote control of lighting. The LED drivers can be connected to a standard 1-10V driver and controlled with it.
1-10V drivers are available e.g. from all well-known switch manufacturers (JUNG, GIRA, MERTEN, BUSCH JÄGER etc.) as a built-in module for the flush-mounted box. These modules only need to be connected to the driver via a 2-wire cable and the light can be controlled directly on the wall. As an example, a 1-10V driver for the flush-mounted box from GIRA:
The 1-10V control voltage is supplied by the driver. I.e. the 1-10V driver does not have to be connected to the mains here.
However, many drivers for the flush-mounted box can also switch 230V at the same time. This is usually done by pressing on the driver. Here, for example, with one and the same driver, the LED power supply can be switched via 230V and dimmed at the same time via 1-10V at the LED driver.
Technical data:
Model
PWM-200-24
Voltage
24V
Maximum power
200W
Current
8.3A
Dimensions
195xx68x39.5mm (LxWxH)
Weight
1030g
Product number:
LED1171
Desktop power supply 24V - 3.7A - 90 Watt
€39.27*
Meanwell desktop switching power supply GST/GS90A24 with 24V/90W, max. 3.75 Amps (picture similar)Hollow plug secondary
Universaleingang
geschützt gegen Kurzschluss, Überlast, Überspannung
Isolationsklasse I
entspricht Energy Star Level IV
Einschaltstoßstrom, max.: 70A
Leerlaufleistung, max.: 0,5W
Eingangsstecker: C14 (EN60320-1)
Scope of delivery:1 switching power supply without power cord
Technical data:
Model
GST/GS60A24
Voltage
24V
Maximum power
90W
Current
3.75A
Voltage input
90...264V AC (47...63Hz), 135...370 DC
Working temperature
0...+50°C max.
Supply line length
12...15V: 1m
Dimensions (output connector)
2.5x5.5 (LxWxH)
Weight
450g
Product number:
LED1135
Plug power supply 24V - 1A - 24 Watt
€20.00*
Plug switching power supply 24 Volt, 1 Ampere, 24W
Universal input
insulation class II
very compact design
overload and short circuit proof
input voltage range : 100-240V AC
connection cable approx. 150cm with round plug
round plug: 2,1mm inner diameter (+) and 5,5mm outer diameter (-)
Product number:
LED1132
230V TRIAC dimable powersupply
€49.00*
230V dimmable power supply with 24V - 36 Watt output. The power supply unit can be controlled on the input side with standard TRIAC dimmers (leading edge or trailing edge phase control), as used with classic incandescent lamps etc.. On the output side, it then supplies 24V constant voltage with PWM dimming, as is also known from typical LED controllers. This allows LED strips to be controlled with classic 230V dimmers. As an alternative to TRIAC control, the power supply unit can also be controlled via PushDim using a push-button.
Wiring options:
Technical data:max. power: max. 36Wsec. voltage: 24Vefficiency: 87%dimming range: 1 bis 100% (depending on TRIAC dimmer)PWM frequency: 200-500HzCE, MM, SELVprotection against: short circuit, overheat, overpoweroperating temp.: ta: -30...+55°C, tc: +70°C
Air humidity: 20 - 95%, non condensingdimensions: 175*44*30mmweight: 185g
Product number:
LK125mas
Power supply types
HLG
HLG power supplies are the highest quality power supplies in the range. Passively cooled and solidly built with IP67 moisture protection. HLG power supplies work very well with LED controllers, are quiet and therefore always the first choice when it comes to LED installations.
SLIMLINE
limline power supplies are used when on-site installation conditions do not allow high-quality HLG power supplies. They are extremely slim and flat, but more susceptible to noise (whistling, buzzing) as soon as an LED controller or dimmer is connected downstream.
TABLE and PLUG POWER SUPPLIES
These are simple power supplies for rather small installations without LED controllers or dimmers. In combination with controllers or dimmers, these, like all inexpensive power supplies, tend to produce noise (whistling, buzzing). Use high quality HLG power supplies if possible.
PWM power supplies
PWM power supplies allow a very good dim behavior even without downstream LED controllers. They can be controlled, for example, by commercially available 1-10V controllers and output a PWM at the output to control the LED brightness.
Notice:
LED-Studien advises against the use of dimmable power supplies when operating LEDs! The only exception are PWM power supplies, which directly output a pulsed PWM (pulse width modulation) signal, allowing convenient brightness control. PWM is the standard for precise dimming of LEDs. Dimmable power supplies from the ELG or HLG series, however, work without PWM! Dimming works there only conditionally and generally requires to go up to the power limit of the power supply, which is however unfavorable for the life span of the power supply. Dimming down to 0, i.e. OFF, is not possible at all with these power supplies. This only works with PWM power supplies or with a downstream controller, like our LK55 series.