Power supply HLG 24V - 25A - 600 Watt, extremely quiet

Meanwell

€199.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Product number: LED1155

Available stock: 6

Switching power supply Meanwell HLG-600-24, 24 Volt, 25 Ampere, 600W - without fan!

overload protection by current limiting, auto recovery, protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation

Note for connection of LED drivers

If the driver has 2 parallel inputs (++--) please use both parallel voltage outputs of the power supply and connect them to the parallel inputs of the driver.

Technical data:

Model	HLG-600-24
Voltage	24V
Maximum power	600W
Current	25A
Adjustable voltage range	12 ~ 24V
Overcurrent protection	95...108%
Inrush current, max.	70A
Voltage input	90...264V AC (47...63Hz), 127...370V DC
Power factor	0,93
Working temperature	-40...+70°C
Dimensions	280x144x48.5mm (LxWxH)
Weight	3,900g

Properties "Power supply HLG 24V - 25A - 600 Watt, extremely quiet"

IP protection:	IP65
Power:	600 Watt
Power supply type:	HLG
Voltage:	24V

Data according to manufacturer. Errors and changes reserved.

Manufacturer

MEAN WELL EUROPE N.V.

Langs de Werf 8

1185XT Amstelveen

The Netherlands

^{www.meanwell.eu}

Recommended accessories

WAGO terminal 221 2 cored

WAGO's new COMPACT connection terminal 221 is suitable for all types of conductors. The operating levers move smoothly, yet you have a wide range for the cross-section and a secure connection. Technical data: Total number of potentials 1 Color transparent Design data according to 1 EN 60664 Rated voltage EN (1) [V] 450 Rated surge voltage (1) [kV] 4 Rated current (1) [A] 32 Connection technology (1) CAGE CLAMP® Ladder type 1 solid + stranded Cross section from 0.2 mm² / 24AWG Cross section until 4 mm² / 12 AWG Ladder type 2 finely stranded Cross section from 0.14 mm² / 24 AWG Cross section until 4 mm² /12 AWG Stripping length from 11 mm Wiring type Side wiring Flammability class according to UL 94 V2 Weight [g] 2,5 Width 2/3/5 pole 13.1/18.7/29.9 mm Height 8.3 mm Depth 18.6 mm

Product number: W221mas

€0.49*

Details

WAGO D2411 holders

Compact holders for the narrow D2411 feed-through connectors from WAGO. In each case, 3 or 5 terminals fit next to each other, thus enabling clean installation, e.g., in the control cabinet or in a light cove.

Product number: D2411-Halterungen

€1.20*

Details

Schuko connection cable, 3-wire, 150cm, white

For all larger power supplies with protective contact leads, such as the entire Meanwell HLG series. Straight grounding plug (CEE 7/4) and open end with wire end ferrules. Notice: The connection of 230V supply lines must never be carried out under current and must be carried out by a qualified electrician. There is a danger to life here!

Product number: K12w

€4.90*

Details

Schuko connection cable, 3-wire, 150cm, black

Product number: K12

€5.30*

WAGO IP68 gel box

Waterproof gel box for WAGO terminals. Simple, fast and safe handling Immediately ready for use and accessible again Silicone-free Label-free Can be stored indefinitely Complete system consisting of gel boxes and WAGO terminal blocks is VDE-tested and IPX8-certified Dimensions: W 46 x H 18 x D 34mm, width inside 35mmSuitable for: 2 x W221-2 or 1 x W221-5

Product number: W221-gel

€9.90*

Details

Inrush current limiter

Inrush current limiter Meanwell ICL-16R up to 16A with integrated bypass relay (no simple NTC).Peak current limiting for inductive and capacitive loads180 - 264 VAC / 16 A permanent internal thermal fuse integrated bypass relay capacitive loads up to 2500µF for DIN rail mounting Technical data: Model ICL-16R Input voltage 180-264VAC Frequency range 47-63Hz AC rated current, permanent 16A Working temperature -30...+70°C Dimensions 90x35x55mm (LxWxH) Weight 116g

Product number: ICL_mas2

€42.50*

Details